1993 Acura Integra Hatchback Logo
edward fuller Posted on Mar 22, 2014

Will not start .. it does turn over - 1993 Acura Integra Hatchback

1 Answer

Rocker Dave

Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Filmmaker:

Uploaded 5 video answers.

New Friend:

An expert that has 1 follower.

  • Contributor 35 Answers
  • Posted on Apr 28, 2014
Rocker Dave
Contributor
Level 1:

An expert who has achieved level 1.

MVP:

An expert that got 5 achievements.

Filmmaker:

Uploaded 5 video answers.

New Friend:

An expert that has 1 follower.

Joined: Dec 04, 2012
Answers
35
Questions
1
Helped
8833
Points
36

Check the fuel pump relay, under the driver's side dash, to check for correct function. It's #18 in the diagram.
will not start - ec7e3765-9ae1-49a9-859c-0eb17db84e25.gif


If that checks out, check the fuel filter, maybe change the filter. One more thing you can do is check the function of the fuel injector resister (see below), located on the firewall driver's side of the engine compartment.



The last thing to check is if you are getting a spark at the spark plugs, have someone (or use a remote button) start the car while you are holding with a pair of long-handled pliers the left most spark plug cable (#1) metal contact against the valve cover. If there ain't no spark, THAT's you're problem. Then you should check the distributor, and also the car computer, located underneath the floor plate on the passenger side inside the car (pull back the carpet to reveal the floor plate). At this point you really should have at least a Haynes repair manual of your year car.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Occasionally, about every 6 to 8 times tried, the engine will turn but not start. If I turn the key off for about 3 seconds, it usually starts within a few turns. Do you know what can cause this?

A year, make, model, and engine size would help but I will through this at you.

Instead of just trying to start the car turn the key to the run position and wait 3 seconds. Turn the key off and immediately turn the key back to the run position and wait another 3 seconds. Turn the key off then try to start. Do this every time you try to start the car. If you symptom never occurs when you start the vehicle like this than I would suggest taking a closer look at the fuel system.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
1answer

I'm 19 95 Chevy Caprice wont start I don't know but won't start

Won't start how ? Does the engine turn (crank) when the key is turned to the start position ? Not start an run but turn or spin ! A crank - no start Or doesn't turn or spin this is A no crank - no start . These two different conditions would need different diagnostic steps .
0helpful
1answer

Truck will not start, wait to start warning light is out?

Please provide more information.

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there is nothing..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but there only a ticking/clicking sound..." or

"I put the key in the ignition, turn it and the warning light goes out, I turn the key to start but the engine only turns over and doesn't catch."
0helpful
1answer

Wont start sometimes

GM cars have bad problem with security system. If you key turn light and will start other time will stick and need shaking to turn over and won't start just replace the key. Security system need some times to refresh the memory.
1.turn key ON for 10min.
2.turn key OFF 10sec.
3.turn ON 10min.
4.turn OFF 10sec.
5.turn ON 10min.
turn OFF ON and start
total of 30 min. to refresh the memory
the next step is more expensive and need some skills.
on top of the ignition switch is a sensor go bad
replace ignition switch with the sensor and do the learning process from step 1 to 5
0helpful
1answer

When i turn the ignition key over the 1994 gmc suburban will not start. then when i turn the ignition key over again the vehicle will start with no problem. i dont do anything between turning the key over....

Neutral Safety Switch ? located at the bottom of the steering column. Mine is tricky, have to pull the shift lever while turning over to get it started. happened after i replaced ignition switch & Neutral Safety Switch
1helpful
1answer

Grand am wont start. it is turning over tho. i tried the security fix (leaving it on for 10-20 mins, then off and trying) but it still won't start.

Hello: Try this, Turn key on, try to start, let k/switch come back to run, let set for 10min(security light out) turn key off 10sec, turnkey back on let set 10min, turn key off 10 sec, turn key on let set 10min. turn key off 10sec. turn key on start car if it doesn't start and the security light is flashing you have a passlock problem and it will require a new lock cylinder assembly and the above learn procedure.
0helpful
3answers

Jeep 1997 want start new starter bat volt good want turn over

check the neutral safety switch sometimes when they are going out they will start in neutral
Not finding what you are looking for?

74 views

Ask a Question

Usually answered in minutes!

Top Acura Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...