Question about 1999 Plymouth Voyager

1 Answer

Dropping water at back part power stering

Droppong a lot water at back part of power steering

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Plymouth Master
  • 354 Answers

I sounds like it is the heater hose assembly. This vehicle, if I recall correctly, has an assembly of steel pipes that run the coolant into the interior of the vehicle for the HVAC. If it is in the back like you say, I would check those pipes first. If it is more to the front of the car and engine, it may be the water pump.

The best way to check a cooling system is to pump pressure into the system and check for leaks.

Posted on Mar 22, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 honda accord 2.4 power stering hard,replace pump got little softer but still hard


The steering is controlled by the steering rack,
& they get stiff because no one changes the fluid
every 3 years

The upper strut bearings fail & make steering stiff

Doubt the pump was a problem at all

Mar 03, 2013 | Cars & Trucks

1 Answer

Bird like chirpping noise from front right behind firewall when start car an begin backing. While noise is occurring the stering is difficult as if no power stering. What is the possible cause


Check your power steering fluid level. It is probably low. Add power steering fluid only. And do not over fill it.More is not better.

Feb 03, 2011 | 2006 Lexus Es 330

1 Answer

Have power stering flued but no power stering


If power steering fluid is full, but the belt driven power steering pump's pulley doesn't turn at a good speed, then the power steering won't work properly. Check that the belt tensioner is providing enough belt tension for the power steering pump to do its job.

If the rack and pinion is bad, it may also cause a lack of power steering in your vehicle.

Good luck on this repair.

Jan 25, 2011 | 2003 Pontiac Grand Am

1 Answer

The power stering pump is making noise when I move the stering wheel and the wheel is hard to move


FIRST CHECK POWER STEERING FLUID.IF OKAY.CHECK POWER STEERING BELT TENSION.IF BELT TENSION OKAY.POWER STEERING PUMP GOING BAD.

Jun 28, 2010 | Cars & Trucks

2 Answers

How do i put power steering fluid in my 2000 chevy impala


With engine off power stering pump located on engine. remove cap. cap will have a dip stick attached add "GM" power stering fluid a little at a time. wipe dip stick clean reinsert and remove check by using the high oil line the the marking on the dip stick. do not over fill

Jan 22, 2010 | 2000 Chevrolet Impala

1 Answer

I'm replacing water pump, all bolts are out except the back one ,it seems that the pully on the I think power stering pump wont alloy me to get it all the way out


Have to remove the two power steering pump bolts. They're 13mm head. Once power steering pump is out of the way, waterpump bolt can be removed.

Oct 01, 2009 | Pontiac Bonneville Cars & Trucks

2 Answers

The power steering message came on in my car and I dont know what I need to do??


first of all check to see if you have a leak . second locate your poewer steering resivoir and determine the cap is on and tight open the cap add fluid if it's low make sure to replace the cap securly afterwords

Jun 22, 2009 | 2006 Chevrolet Malibu

4 Answers

My 2001 astro lost it's brakes and power steering at the same time. any ideas?


check the power steering pump to see if the shaft broke. remove the belt and pull the pulley on the pump, it should not pull out of the pump. If it does you need a new pump

May 12, 2009 | 2001 Chevrolet Astro

1 Answer

2000 monte carlo how to replace water pump.last bolt


there should be holes in power steering pump pulley that when positioned correctly the bole should go through one of those holes, if not then you have to remove the pump

Apr 29, 2009 | 2004 Chevrolet Monte Carlo

1 Answer

Having trouble with power stering


could be the power steering pump or other possibility rack and pinion

Jan 26, 2009 | 1995 Toyota Camry

Not finding what you are looking for?
1999 Plymouth Voyager Logo

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

77169 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22265 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8729 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...