Question about 1994 GMC Jimmy
Transmission slips and fails to move vehicle in forward gears. Drives in reverse gear.
Posted by Anonymous on
If your fluid level is right you may have a bad transmission. you need to talk to a mechanic.
Posted on Mar 15, 2015
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi check the colour of your transmission fliud is it should a medium red if it looks dirty brown or any other colour that would suggust your clutchs are slipping if your transmission fluid is low or over filled it will cause your problem you can drain your fluid remove your lower sump pan clean the boxes main body and filter replace the oil and try there is no gaurentee it will work but this is a basic you can do and these type of repair can resolve your problem if the fliud is brown then this and an adjustment of of the boxes clutchs and bands must be done this can be done with the transmission in sitution there are other things that can cause the problem but these are well worth doing first as it will not cost a fortune and has a good chance of success yates210456
Posted on Oct 06, 2008
SOURCE: transmission - no reverse
i had to put a new trans in my 2000 jimmy about a year ago there is something inside called a "reverse hub" its made from aluminum and not very hard to break..when mine broke i was stuck trying to move in reverse and it heard a pop then a winding down noise and sure enough its the reverse hub to fix it i just had the trans rebuilt
Posted on Nov 18, 2008
Shouldnt be a big deal.
Your shift linkage is probably bent.
You will need to go to a trans shop and get it fixed.
I highly recommend AAMCO since they warranty their work. They will have to "unbend" the bracket or readjust the cable play, or repair the linkage that places the car in the proper gear according to your indicator on steering column or dash.
Not a big deal...but then again you could have crushed the synchro gears, but i truly doubt it!
Posted on Dec 30, 2008
I had this exact problem on my 2005 5.3L Suburban... It would shift into 1 and 2 and reverse, but not 3 and 4.
I took it into a transmission shop, and he said the 3-4 shift solenoid was burned up. Wanted 1500 to fix it. Far from home, so I have to pay it.
Posted on May 31, 2009
Tips for a great answer:
Feb 28, 2015 | 1997 Chevrolet Blazer
Dec 02, 2013 | Cars & Trucks
Jul 23, 2017 | Chevrolet Blazer Cars & Trucks
Apr 26, 2011 | 1993 Ford Tempo
Feb 28, 2011 | 1999 Oldsmobile Bravada
Feb 16, 2011 | 1992 Chevrolet C/K 2500
May 01, 2009 | 1995 Toyota Camry
174 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: