Question about 2003 Chevrolet Monte Carlo

Open Question

How to reset tire light

How to reset low tire light

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Buick rendezvous low tire pressure light


After checking/adjusting all tire's pressure (including spare, some spares have a tire pressure sending unit), turn ignition "ON" (NOT "START", just the position key is at when you are driving).
Press the MODE button until LOW TIRE PRESSURE HOLD SET TO RESET is displayed.
Press and hold the SET button until a chime sounds and TIRE PRESSURE RESET is displayed and a chime sounds 3 times.
Release the SET button and TIRE PRESSURE NORMAL is displayed.

Mar 06, 2014 | Cars & Trucks

2 Answers

How do I reset the low tire pressure light on a 2008 Nissan Centra


TO RESET LOW TIRE LIGHT.JUST DRIVE VECHICLE 16 MPH TO COMPLETE THE TIRE RESET PROCEDURE.BUT FIRST PUT AIR IN TIRES FIRST.YOU NEED 33 PSI.TIRE PRESSURE.

Jan 17, 2011 | 2008 Nissan Rogue

2 Answers

I have a 2009 ford focus and dont know how to reset the low tire pressure light


It should go away after an hour or so from the time you get the tire fixed.

Dec 20, 2010 | Ford Focus Cars & Trucks

3 Answers

Flashing exclamation point


definetly tire prssure low light. you can reset it by scrolling through the mileage and trip meter once you get to the screen for the tire preesure monitor hold the button down till it flashes and it will reset. make sure you check all your tire pressures first.

Aug 07, 2010 | 2004 Ford Freestar

1 Answer

I want to reset the low tire pressure light from my 2001 chevy impala. I go into the stereo disp. Button but the option is not in there how can I reset it without using the stereo?


I want to reset the low tire pressure light on my 2003 chevy impala. I go into the stereo disp. button, but the option is not there. How can reset it without using the stereo?

May 20, 2010 | Cars & Trucks

1 Answer

How do you reset low tire light


1. check and make sure that your tires are inflated to the correct pressure

2. turn the ignition switch to the ON position. If the low tire pressure warning light comes on, push and hold the tire pressure warning reset switch (think the switch is in the glovebox, but not sure) until the warning light turns off and then release the switch.

3. now press and hold the tire pressure warning reset switch until the low tire pressure warning light blinks three times.

4. initialization is *not* completed until driving at the vehicle speed of 19 mph or over for more than one hour. the tire pressure monitoring starts when initialization is completed.

Aug 20, 2009 | 2005 Chrysler PT Cruiser

2 Answers

Low tire light came on - tire pressure ok


Because of changing outside temps this happens, just hold reset button on left side of dash until it reads tire pressure 100% again, just make sure your pressure is right before you do it. this is the same for oil changes and the like.

Apr 26, 2009 | 2001 Buick LeSabre

2 Answers

Low tire pressure idiot light


Your nissan also has a tire monitor on your spare tire if your spare has low pressure and the other 4 tires have correct pressure the light will stay on . after you ajust the spare also the light should go away.

Mar 24, 2009 | 2007 Nissan Pathfinder Off Road

1 Answer

2005 ford freestar reset light on


Vehicles Without Message Center To reset the system, press and hold the odometer reset button and wait for the "TIRE PRESSURE SET" light to illuminate. Continue to press the button for 3 seconds, then release. After 3 seconds, the low tire pressure warning lamp will flash 3 times, indicating that the low tire warning system reset procedure is complete.
Vehicles With Message Center To reset the system, press and hold the SETUP button and wait for the message center to display "REST FOR SYSTEM CHECK". Then press the RESET button and wait for the message center to display "HOLD RESET TO RELEARN". Press and hold the RESET button for 3 seconds. The message "HOLD RESET TO RELEARN" and the low tire warning lamp will flash 3 times, indicating the reset procedure is complete.

Mar 12, 2009 | 2005 Ford Freestar

1 Answer

Tire reset on in ford freestar


Reset without message center:
To reset turn the ignition to the ON position, depress and Trip/odometer
button (located in the instrument cluster) until “TIRE RESET” or
“CHECK TIRE AND RESET” is displayed in the odometer display window.
Once “TIRE RESET” or “CHECK TIRE AND RESET” is displayed,
press and hold the button for three seconds. The low tire warning indicator light will flash three times
as the low tire warning system begins to initialize.

------------------------------------------------------------------------
Reset with message center:
To reset turn the ignition to the ON position, press the set up button on
the message center until “SYSTEM CHECK” is displayed. Press the
RESET button until “HOLD RESET TO RELEARN” is displayed, continue to hold the button for three
seconds. The low tire warning indicator light will flash three times as the low tire warning system begins to initialize.

Oct 13, 2008 | 2005 Ford Freestar

Not finding what you are looking for?
2003 Chevrolet Monte Carlo Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...