Question about Cars & Trucks

Open Question

Broken lid clamp for my tetra PFL1500

Do they sell replacements

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Who sells adjustable ear clamps stainless steel?


Just get Aviation style clamps to replace these.

Apr 25, 2016 | Cars & Trucks

1 Answer

Door repairs


The doors have a pin and washers that help keep the door functioning right. There is a kit they sell at your local auto parts store for about 10. bucks with new washers and a pin. More than likely the washers are broken and need to be replaced. Its a fairly easy job. Just cut off the clamp at the bottom of the pin push it out and placethe old washers with new washers then place in the new pin with the c clamp at the end.

Jan 26, 2013 | 1991 Ford Thunderbird

1 Answer

How do I replace the battery on my 2004 pt cruiser?


Steps to replace the battery

Air Cleaner Removal

1. Loosen the air intake hose clamp (with a flathead screwdriver), which holds the intake tube to the air box lid.

2. Once the hose clamp is loosened, pop open the two spring-loaded clamps on the left and front side of the air box. The clamps help secure the lid to the air box. On the back of the air box lid there are 4 plastic slots, which match up with 4 corresponding tabs on the air box. In order to unhinge the lid from the air box, slide the lid away from you about an inch and gently lift the lid up. Ensure that the lid is free from the air box hinge; then carefully disconnect the air intake hose from the lid at the hose clamp and remove the lid from the engine compartment.

3. Lift the air filter out of the air box. 4. Disconnect the PCV hose from the lower air box.

5. The lower air box is removed by just tugging straight up on it. It will pop out as it's held in place by two rubber pins that wedge into the indentations in the plastic air box.

Battery Removal

6. Disconnect the battery terminals - negative 1st, the positive. 7. Remove the anchor bolt at the base of the battery using a 1/2" socket. 8. Lift battery out (with a battery carrier strap). Save the thermal blanket wrap to slip on the new battery.

Cleanup and Installation

9. Clean the terminals by dipping in a cup filled with baking soda and warm water. Use a battery terminal cleaning tool, wire brush to remove the corrosion or a tiny screw driver to scrape with. Rinse with water and clean up the tray with a towel.

10. Install the thermal blanket on new battery. Note the position of the notches on the blanket when replacing it. Lift into car and slide the battery as much as possible towards fender. Reinstall retaining bolt.

11. Install felt washers ($1) to prevent corrosion on the terminals

12. Reinstall terminals (positive 1st, then negative). Apply some grease or Vaseline to the tops of the terminals.

13. Reinstall air cleaner box. Carefully line it up and push down Make sure to seat it completely when you reinstall it.

14. Reinstall filter; cover. Make sure clips are on tight.

Thank you for using fixya and good luck
http://www.ptcruiserlinks.com/forum/pt-cruiser-videos/19853-video-how-replace-battery.html

Aug 05, 2010 | 2004 Chrysler PT Cruiser

1 Answer

Need to replace battery, how do you remove the air box


Steps to replace the battery

Air Cleaner Removal

1. Loosen the air intake hose clamp (with a flathead screwdriver), which holds the intake tube to the air box lid.

2. Once the hose clamp is loosened, pop open the two spring-loaded clamps on the left and front side of the air box. The clamps help secure the lid to the air box. On the back of the air box lid there are 4 plastic slots, which match up with 4 corresponding tabs on the air box. In order to unhinge the lid from the air box, slide the lid away from you about an inch and gently lift the lid up. Ensure that the lid is free from the air box hinge; then carefully disconnect the air intake hose from the lid at the hose clamp and remove the lid from the engine compartment.

3. Lift the air filter out of the air box. 4. Disconnect the PCV hose from the lower air box.

5. The lower air box is removed by just tugging straight up on it. It will pop out as it's held in place by two rubber pins that wedge into the indentations in the plastic air box.

Battery Removal

6. Disconnect the battery terminals - negative 1st, the positive. 7. Remove the anchor bolt at the base of the battery using a 1/2" socket. 8. Lift battery out (with a battery carrier strap). Save the thermal blanket wrap to slip on the new battery.

Cleanup and Installation

9. Clean the terminals by dipping in a cup filled with baking soda and warm water. Use a battery terminal cleaning tool, wire brush to remove the corrosion or a tiny screw driver to scrape with. Rinse with water and clean up the tray with a towel.

10. Install the thermal blanket on new battery. Note the position of the notches on the blanket when replacing it. Lift into car and slide the battery as much as possible towards fender. Reinstall retaining bolt.

11. Install felt washers ($1) to prevent corrosion on the terminals

12. Reinstall terminals (positive 1st, then negative). Apply some grease or Vaseline to the tops of the terminals.

13. Reinstall air cleaner box. Carefully line it up and push down Make sure to seat it completely when you reinstall it.

14. Reinstall filter; cover. Make sure clips are on tight.

Good luck and thank you for using Fixya

Mar 07, 2010 | 2005 Chrysler PT Cruiser

1 Answer

2002 camry - Need to replace broken console lid


Solved it. Found a small shank screwdriver that fitted into the opening with a little bending of the plastic frame. managed to replace it with a new one without trouble. No further help needed. dave

Nov 06, 2009 | 2002 Toyota Camry

1 Answer

My truck light on the dash used to go on & off


There was a wire attached to the trunk lid on the drivers side that was attached by a clamp. It looks like this sm. clamp was rubbing on the wire eveytime the trunk was opened & closed. I found someone that can splice in a new piece where it is broken.

Nov 01, 2009 | 2002 Dodge Intrepid

1 Answer

How do I remove and replace air filter on Buick LeSabre 2000


air filter is located in a 'black box' connected by a flexible tube to the intake on engine.spring loaded wire clips at the sides of the box clamp the lid in place.release clips,lift lid to access filter.

Sep 30, 2009 | 2000 Buick Century

1 Answer

How do I replace the air filter?


If no clamps try removing the top airpipe if it is connecter to the lid of the filter housing. check the top of the lid for arrows If the housing is round try turning it if its square or rectangular id will slide off. There should be arrows to indicate how it is moved

Aug 07, 2009 | 2005 Suzuki Forenza

3 Answers

Where is the trunk lid pull-down switch located?


look for the little motor and make sure the little drive gears are ok and not damage in any way. here is a place that only sells GM parts only and it schram auto & truck parts and the #1-800-292-1032

Feb 11, 2009 | 1990 Cadillac Eldorado

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...