Question about 2007 Volkswagen Jetta 2.5 Sedan

Open Question

1090 code 1090 and 110 evap code

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have DTC Codes; P0441, P0442, and P0446 EVAP codes. Have had too many things replaced to name and still have codes. Originally, only had one code P0442, after the unsuccessful removal of severalevap


code p 0442 refers to evaporative emission(EVAP) system---small leak detected====causes--hose connections--intake leak--EVAP canister--EVAP canister purge valve
it also refers to --large leak detected====causes fuel cap loose, off---mechanical fault--hose connections---EVAP pressure sensor
code p 0441 refers to EVAP system--incorrect flow detected====causes hoses, intake leak-- EVAP canister purge valve
code p 0446 refers to EVAP system, vent control---circuit malfunction===causes--wiring---EVAP canister purge valve----ECM
if you can remember when the problem started ( after refueling) it may be that the cap is not fitted correctly
it could that in the fixing process , the wiring has not been correctly installed or the problem is the canister purge valve needs attention

Feb 06, 2017 | Cars & Trucks

1 Answer

Hi My Ford bantam diesel does not have power it can only reach 110 km per hour, my ref count go anywhere more than 3, please advice on what could be coursing the problem


run the fault codes and look for problem accelerator position sensor
may be an EVAP not venting the fuel tank properly

Nov 09, 2016 | Ford Cars & Trucks

1 Answer

My 06 cobalt has these codes can anyone tell me what they mean? Are they an expensive fix? p0446,p0455, p0172


code p0446 refers to evaporative emission (EVAP) system-vent control-circuit malfunction===causes --wiring--EVAP canister purge valve--ECM
code p0455 refers to EVAP system-large leak detected===causes --hose connections--intake leak--EVAP canister---EVap canister purge valve
code p0172 refers to system too rich, bank 1===causes intake blocked---EVAP canister purge valve--fuel pressure ---EGR system---injector/s ---ECM
because the EVAP purge valve appears in all codes I would be inclined to change that unit first the run the fault codes again

Jul 23, 2015 | 2006 Chevrolet Chevrolet Cobalt LT

1 Answer

Got an evap code on my 2004 z71 Tahoe. Replaced evap.reset computer Code came back.. Replaced evap again... Code returned


Which code?, p0455?-46?
Check air hoses very closely. All vacuums in evap system, give me the code, and I'll put you there bud.

Dec 18, 2014 | Cars & Trucks

1 Answer

2004 Honda Pilot Evap code P1456 Changed gas cap from honda and still


code p1456 refers to evaporative emission (EVAP) canister purge system(fuel tank system) -leak detected===causes--hose-fuel tank/pressure sensor--fuel filler cap--EVAP valve /bypass solenoid--EVAP two way valve---EVAP canister/vent valve

There is also a second reference to the code which is EVAP system leakage ====filler cap--EVAP canister purge valve--hoses---EVAP canister shut off valve---ECM programming---ECM

Check with the service dealer that the filler caps are interchangeable . It may be coincidence that the problem started after you changed caps or it may have shown a failure in the making

Aug 19, 2014 | Cars & Trucks

1 Answer

What is a P2404 code mean from a suzuki sx4


Trouble Code: P2404 (2.0L L4 VIN 5 Automatic CVT)
Evaporative Emission System Leak Detection Pump Sense Circuit Range / Performance
Number of Trips to Set Code: 1
Trouble Code Conditions:
EVAP vent valve stuck open: EVAP leak check pressure is lower than -0.14 kPa even if EVAP vent valve is operated from OFF (OPEN) to ON (CLOSE) with EVAP leak detection pump ON. EVAP vent valve stuck closed: EVAP leak check pressure is unstable (difference between maximum and minimum is 0.36 kPa or more) when EVAP vent valve is OFF (OPEN) with EVAP leak detection pump ON. EVAP leak detection pump stuck OFF: EVAP leak check pressure is higher than -0.14 kPa even if EVAP leak detection pump is ON. EVAP leak detection pump flow high: Reference pressure of EVAP leak check pressure is lower than specified value (depending on BARO) EVAP leak detection pump flow Low: Reference pressure of EVAP leak check pressure is higher than specified value (depending on BARO).
Possible Causes:
  • EVAP leak detection pump (in EVAP leak check module) and/or its circuit
  • EVAP vent valve (in EVAP leak check module) and/or its circuit
  • EVAP leak check module and/or its circuit
  • ECM

Jul 11, 2014 | 2010 Suzuki SX4

1 Answer

Evap code cleared not ready showing


The EVAP monitor is a pain to set. It needs 2 full drive cycles and will not reset sometimes if an EVAP code is pending. Check the pending codes with your code tool and see if there are any for the EVAP, if not, like I said, the EVAP is a tough monitor to set.



How many other monitors are not ready?

Apr 04, 2014 | 2001 Pontiac Grand Am SE

1 Answer

Toyota echo won't start code 440 441 446


Error Code: P0440
Fault Location:
Evaporative Emission (EVAP) System - Malfunction
Possible Cause:
Malfunction Indicator Lamp (MIL) active.
Soution:
Check Evaporative Emission (EVAP) System Sealing.
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve .

Error Code: P0441
Fault Location:
Evaporative Emission (EVAP) System - Incorrect Flow Detected
Possible Solutions:
Check Evaporative Emission (EVAP) Canister Purge Regulator Valve .
Perform Output Test.
Check Evaporative Emission (EVAP) Canister Purge Solenoid Valve .
Check Evaporative Emission (EVAP) Canister.
Perform Basic Setting.
Check Pipes between Tank Breathing and Throttle Body.

Error Code: P0446
Fault Location:
Evaporative Emission (EVAP) System, Vent Control - Circuit Malfunction
Possible Cause:
Wiring harness.
Evaporative emission (EVAP) canister purge valve.
Engine control module (ECM).

Feb 25, 2013 | 2002 Toyota ECHO

2 Answers

Common causes for codes p0441


getting code p441 could be caused by evap purge solenoid vacuum line loose leaking or restricted, evap purge solenoid faulty, evap purge vacuum line to canister leaking or disconnected,evap canister failed.

Feb 06, 2012 | 2001 Chrysler 300M

1 Answer

Imam audi a4 godina na proizvodstvo 1996 1.6 74kw adp koga ja palam se pojavuva nekoe cukanje i motorot bucno raboti po nekoe vreme se gubi toj zvuk ama se pojavuva pak koga ja vozam popoleka do 1700...


?? ??? ?? ????????, ? ?? ???? ???? ? ????, ????? ???? ??? ?????? ? ???????. ?????? ?? ?? ?? ???????? ? ???? ?????????? ????????? ?????? (?? ?????????? / ???????? ????). ????????? ?? ?? ??? ????? ? ????? ?????? ?? ???????? ????. ??? ?? ?? ????????, ?? ?? ???????? ???????? ??? ????????? ? ?????????? ????????. ?????? ?? ??? ??? ???????? ???????. ?? ?? ? ???? ?? ???????.

Sep 11, 2010 | 1996 Audi A4

Not finding what you are looking for?
2007 Volkswagen Jetta 2.5 Sedan Logo

Related Topics:

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volkswagen Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Volkswagen Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...