Question about 2006 Hyundai Azera

Open Question

Serpentine belt How to tighten the serpentine belt

Posted by on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What bolts do I loosen to tighten the power sterring belt on my 1981 buick reveria


IF you have a serpentine belt it's not a matter of adjusting the power steering belt tension because it's done automatically with a serpentine belt tensioner.
OTOH, if you have a separate V-belt you'll need to loosen the mounting bolt/nut at the bottom of the steering pump and the adjustment bracket then tighten the belt by moving the adjustment nut to tighten the belt.
You might be able to google a video of your particular engine power steering belt adjustment.

Mar 02, 2017 | Buick Riviera Cars & Trucks

2 Answers

Belt slip


Tighten your serpentine belt.

Apr 12, 2014 | Chevrolet Uplander Cars & Trucks

1 Answer

Tighten Serpentine Belt


Technically, you don\'t. The tensioner pulley keeps the belt tight. If you took the belt off and put it back on, and now it is not tight, it may be on one of the pulleys wrong.

May 12, 2013 | Cars & Trucks

1 Answer

How to tighten the altanator belt on a 1983 chevy cavalier


It's alternator. Do you have a serpentine belt or seperate belt. If seperate, there are two bults on the alternator. Loosten both but do not remove. Take a prybar and pry back on alternator. Have someone hold the prybar while you tighten or hold yourself and tighten. If you have a serpentine belt, you need to replace the belt tensioner. The spring is weak inside the tensioner. It's 30 years old. remember that.

Jan 25, 2013 | 1983 Chevrolet Cavalier

1 Answer

Tighten serpentine belt


which belt there is 2 belts

Dec 03, 2012 | 1994 Pontiac Sunbird

2 Answers

I am trying to hange the serpentine belt on my 09 lancer rallyart and it keeps slipping off


Locate the two belts on the left side (passenger side) of your Mitsubishi Lancer. The outer belt is a serpentine belt, operating four pulleys and the inner belt is your alternator belt.

  • 2 Follow the serpentine (outer) belt to the three pulleys lined up vertically near the front of the engine compartment. Locate the middle pulley, which is the tension pulley for the belt.
  • 3 Loosen the bolt on the middle pulley with a socket wrench by turning counter-clockwise. Do not remove the bolt, just turn it a couple of times. Loosen the tensioner bolt on the side of the of the pulley, facing the front of the vehicle.
  • 4 Remove the serpentine belt and then loosen the bolt on the alternator. With the alternator loose, move it forward so that the alternator belt loosens up and then remove belt from the pulleys.
  • 5 Install the new alternator belt by placing it over both inside pulleys. Tighten the tension on the alternator belt by moving the alternator back and keeping tension on it by holding it back with a long screwdriver. While the alternator belt is tight, use a socket wrench to tighten up the bolt on the alternator.
  • 6 Place the serpentine belt back on the pulleys and then use a socket wrench on the bolt on the front of the tension pulley. Once the serpentine belt is tight, tighten up the bolt in the middle of the tension pulley.
  • 7 Start the Mitsubishi Lancer's engine to test the alternator belt and make sure it is working properly. Once you have verified it is working, turn the engine off.
  • Oct 25, 2011 | 2008 Mitsubishi Lancer GTS CVT Sedan

    1 Answer

    I have a 1990 supreme cutlass and i don't know how to change the serpentine belt. What do I do?



    2.8L and 3.1L Air Pump Belt

    1. Disconnect the negative battery cable.
    2. Loosen the air pump.
    3. Remove the worn belt.

    To install:
    1. Adjust the belt to specifications and tighten the pump mounting bolts.
    2. Connect the negative battery cable.

    2.3L Power Steering Belt
    1. Disconnect the negative battery cable.
    2. Loosen the adjustment bolts.
    3. Remove the power steering belt from the pulley.

    To install:
    1. Route the belt around the pulley.
    2. Adjust the belt to specifications, then tighten the adjustment bolts.
    3. Connect the negative battery cable.

    See Figures 6 through 15

    0900c15280067989.jpg

    Fig. Fig. 6: Unfasten the retaining bolts...


    0900c1528006798a.jpg

    Fig. Fig. 7: ... then remove the serpentine belt guard


    0900c1528006798b.jpg

    Fig. Fig. 8: ...


    0900c1528006798c.jpg

    Fig. Fig. 9: ... then remove the serpentine belt

    1. Remove the belt. Clean the accessory drive belt surfaces.



    0900c1528006798d.jpg

    Fig. Fig. 10: Serpentine drive belt routing-2.2L engine


    0900c1528006798e.jpg

    Fig. Fig. 11: Removal and installation of the serpentine belt-2.3L engine


    0900c1528006798f.jpg

    Fig. Fig. 12: Serpentine belt routing-2.5L engine with and without A/C


    0900c15280067990.jpg

    Fig. Fig. 13: Use an 18mm box end wrench on the pulley nut to rotate the tensioner on the 3.8L engine


    0900c15280067991.jpg

    Fig. Fig. 14: in. breaker bar to rotate the tensioner


    0900c15280067992.jpg

    Fig. Fig. 15: On the 3.4L, use a box end wrench, then rotate the tensioner clockwise and remove the serpentine belt

    Remove the belt guard or coolant recovery reservoir as required.



    Dec 31, 2010 | 1994 Oldsmobile Cutlass Supreme

    1 Answer

    How do you tighten the serpentine belt?


    if your car has a serpentine belt,which is 1 belt that controls everything,then there is no adjustment.if your belt is loose,then you will need to replace your belt tensioner in order for your belt to tighten.another reason could be that it is time to replace your serpentine belt.hope this info helps.take care and good luck, manny

    Apr 04, 2010 | 2004 Toyota Sienna

    1 Answer

    How do you tighten serpentine belt


    Typically serpentine belts are tightened automatically by a tensioner, if the belt is slipping, or squealing, try installing a new belt, careful of the routing tho, be sure to install it correctly, or more problems may occur.

    Oct 26, 2009 | 1999 Dodge Intrepid

    1 Answer

    How to tighten serpentine belt


    if the belt is loose you might have the wrong belt installed on, or the serpentine belt tensioner must to be replaced, they adjust automatic, with spring loaded belt tensioner
    and i will apreciate the ranking to my answer thanx

    Jun 15, 2008 | 2002 Ford Windstar Cargo

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    17 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7688 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...