Question about 2009 Jeep Liberty

1 Answer

2009 jeep liberty only drivers door unlocks

Doors will lock but only the drives door unlocks with the lock switch and key fob

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jeep Master
  • 20,706 Answers

You just get this car.
or it worked before but not now? key questions.

door switch driver and RKE not working right.

and some cars the driver has a master switch and local switch.
and some have a kids safe switch that kills the other doors.
i dont have the opr,guides. for liberties.

in this case , this is a programmable feature. most newer jeeps.
you can program most cars. for (only driver door works with fob)
this is for security, (like airport parking , alone, at night)
the operators guide (lost already )covers this. in the glove box.
most folks don't read it ,they just drive to jeep service and
ask to have it set like you want. and pay $100.
it could be a fault too... but that will take checking above first.
on my other car, i must click 2 times to open all doors, (GM)

the dealer will scan the PCM/BCM puters. to see if they are throwing
DTC errors. any good scan tool can do this.
and check fuses first. never last. or get egg in face.

did you read this?
http://justgivemethedamnmanual.com/jeep/jeep-liberty-owners-manuals/

lost it , then get it and put it on a flash stick and put it back in the glove box or burn a CD . (or kill a tree and print it)

page 21
To Unlock the Doors and Liftgate
Press and release the UNLOCK button on the RKE
transmitter once to unlock the driver's door or twice to
unlock all doors and the liftgate. The turn signal lights
will flash to acknowledge the unlock signal. The illuminated
entry system will also turn on.

Remote Key Unlock, Driver Door/All Doors First
This feature lets you program the system to unlock either
the driver's door or all doors and the liftgate on the first
press of the UNLOCK button on the RKE transmitter.
To
change the current setting, proceed as follows:
• For vehicles equipped with the Electronic Vehicle
Information Center (EVIC), refer to "Remote Key
Unlock," under "Personal Settings (Customer-
Programmable Features)," under "Electronic Vehicle
Information Center (EVIC)" in Section 4.

end quote.

my GUESS, you didnt RTM.
read it.

Posted on Mar 22, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 6 Answers

SOURCE: 2000 Jeep Grand Cherokee. Locked

did you try calling a dealer sometimes they are the only ones that can reprogrm these things

Posted on Dec 23, 2008

  • 130 Answers

SOURCE: Remote door locks don't work with both keyfobs unless it is in the car

Replace the battery in the key fob and try again. That's the number 1 problem solver for this.

Posted on May 02, 2009

  • 1 Answer

SOURCE: 2002 Jeep Liberty, rear window latch is ''locked'' & window is open

rear door of my 2002 liberty will not unlock . I do not have power locks $

Posted on May 05, 2009

  • 3 Answers

SOURCE: Power windows inop

a brake in ur wires in the door,on a 04 grand i had the same problem,in the wire harness were the junction box is rust had broken one of the male prongs

Posted on May 05, 2009

thecanfields
  • 2 Answers

SOURCE: Drivers side door power locks and windows control doesn't work.

PULL THE DOOR OFF MAKE SURE THE 2 LITTLE DOOR HANGERS ARE CONNECTED TO THE SWITCH MECHANISM IF IT IS. THEN YOUR SWITCH IS BROKE. GO TO SCHUCKS AND ASK THEM IF THEY CAN ORDER YOU A WHOLE NEW DOOR LOCK SWITCH ASSEMBLY. REWIRE AND TAA-DA!!!

Posted on May 10, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2002 jeep liberty door locks keeps making a clicking noise when I drive. Weeks later now the keyless remote want work. I changed the batteries. When I drive the door lock will lock in 15 seconds. I have...


Sounds as if the key remote had one of its buttons stuck down.this happen to me when a girlfriend used her nail to press the remote and the rubber flap got pushed inside the fob and kept the remote sending signals.unfortunately you can't just swap out batteries as most key fobs have to be reprogrammed.if you use the dealership that your make is serviced by it is better to ask how much they charge as sometimes independent auto locksmiths can reprogram key fobs cheaper.

Jan 22, 2015 | Jeep Cars & Trucks

2 Answers

I changed my batteries in my keyless remote


  • Jeep 1990 and later Remote keyless entry programing
  • Put the key in the ignition with all doors and trunk closed
  • Open the driver's door on the automobile and leave the door open.
  • 4 Move the switch on the door to the lock position while the door is open.
  • 5 Switch the key in the ignition two clicks to the right to the "On" position. do not start
  • 6 Press the lock button on your keyless remote for your Jeep and hold the button for 5 seconds. Release the button and remove the key from the ignition to complete the programming.


  • Read more : http://www.ehow.com/how_5019251_program-keyless-entry-jeep.html

    Jan 20, 2015 | 2002 Jeep Liberty

    1 Answer

    Doors will not open by using remote key pad


    both RKE keys dead.? car came with 2 , lost one?
    replace the battery in RKE fob yet, why not, its like $1 fix.

    Aug 02, 2014 | 2005 Jeep Liberty

    1 Answer

    Jeep liberty 2006 power lock will lock but not unlock


    there are 3 ways to lock.
    key metal
    on door switches
    and the FOB, RKE.

    so is this a fob question? key fob? only failure???????
    did you know that many fob modes are PROgrammable?
    the operators guide tells you how to do that.
    did you try both fobs, that came with car new., if not why not?
    did you replace the 8 year old fob batteries, no , why not now.?

    on my 08 (for example) :
    can program it to only open drivers door. or all.
    and autolock feature off or on.

    on my other car all was worked fine. then drives door failed
    to open (all 3 fobs fail, one is new) the door solenoid was bad.
    $100 part. now fixed, by me.
    so do all fobs fail. if in fact this is a FOB question
    RKE (called remote key entry by jeep)

    i have 4 fobs for my jeep now. you must have 2 good keys.
    to make a 3rd by self.
    so keep 2 , never ever used. to be self sufficient.
    this is not a door issue, above 3 lines, its a not getting stranded issue.


    Mar 31, 2014 | 2006 Jeep Liberty

    1 Answer

    Some of my doors will lock and unloc by remote and som will not how do I fix this


    do they work when using the master switch on the drivers door panel? if only the drivers door unlocks when pressing the button, it may be a personal setting change needed. in this case usually pushing the unlock button on the remote twice will then unlock all doors. if there is only one lock that doesn't work it is most likely the door lock actuator that is at fault or a broken wire in the door opening wiring harness of the door that the lock does not work on.

    Mar 22, 2014 | 2010 Jeep Liberty

    1 Answer

    How do you bypass 2005 jeep liberty alarm when key fob is broken


    U lock and unlock the passenger door with the key

    Jan 10, 2010 | 2005 Jeep Liberty

    1 Answer

    2008 Aura XR, Key FOB will unlock all the doors but the drivers, and will only remote start the car if the Fob is in the car.


    Interesting. My best guess is that there is problem with driver's door lock actuator or switch. The remote start won't work because the car has to confirm that the doors are locked before initiating the starting sequence.

    Oct 23, 2009 | 2009 Saturn Aura

    1 Answer

    Power windows inop


    a brake in ur wires in the door,on a 04 grand i had the same problem,in the wire harness were the junction box is rust had broken one of the male prongs

    May 04, 2009 | 2004 Jeep Grand Cherokee

    3 Answers

    2002 Jeep Liberty, rear window latch is ''locked'' & window is open


    i was having the same type of problem. we just put a couple of washers behind the latch and then adjusted the latch and it solved our problem.

    Nov 16, 2008 | 2002 Jeep Liberty

    Not finding what you are looking for?
    2009 Jeep Liberty Logo

    200 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Jeep Experts

    yadayada
    yadayada

    Level 3 Expert

    74896 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Jeff Turcotte
    Jeff Turcotte

    Level 3 Expert

    7688 Answers

    Are you a Jeep Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...