Question about 1998 Acura Integra Type R

1 Answer

Car fault code p0700 what to do?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

  • Contributor
  • 38 Answers

Speed Sensor probably. Try:
1. Ensure mainshaft and countershaft speed sensors are installed properly. Disconnect mainshaft speed sensor harness connector. Using a DVOM, measure resistance between sensor terminals.

2. If resistance is not 400-600 ohms, replace mainshaft speed sensor. If resistance is 400-600 ohms, disconnect 25-pin PCM harness connector "B". Check for continuity between ground and 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

3. If continuity is present, repair short to ground in Red or White wire between PCM and mainshaft speed sensor. If continuity is not present, reconnect mainshaft speed sensor harness connector. Measure resistance between 25-pin PCM harness connector "B", terminals No. 15 (Red wire) and No. 14 (White wire).

4. If resistance is not 400-600 ohms, go to next step. If resistance is 400-600 ohms, go to DTC
P0720 (FLASH CODE 9) . Check for loose PCM harness connectors. Replace PCM with a
known-good unit if necessary.

5. Disconnect mainshaft speed sensor harness connector. Check Red wire for continuity between 25-pin PCM harness connector "B", terminal No. 15 and mainshaft speed sensor harness connector. If continuity is present, go to next step. If continuity is not present, repair open in Red wire between 25-pin PCM harness connector and mainshaft speed sensor
harness connector.

6. Check White wire for continuity between 25-pin PCM harness connector "B", terminal No. 14 and mainshaft speed sensor harness connector. If continuity is present, check for loose PCM harness connectors. Replace PCM with a known-good unit if necessary. If continuity is not present, repair open in White wire between 25-pin PCM harness connector and mainshaft speed sensor harness connector.

Posted on Apr 04, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Check engine light came on. Registered codes P1775 and P 0700 X2. What are these numbers and can I fix it myself?


Search Results

P1775 Transmission System MIL Fault - AutoCodes.com

https://www.autocodes.com/p1775.html Repair Information for P1775 code. Learn what does P1775 Transmission System MIL Fault means?
Search Results What the P0700 code means. P0700 is set when the PCM detects a malfunction in the transmission control system. This malfunction causes the vehicle to set a Check Engine Light and trigger a failsafe mode. Once the failsafe mode is set it will remain until the fault is repaired or normal operation is detected.Apr 8, 2016

P0700 OBD-II Trouble Code: Transmission Control System ...

https://www.yourmechanic.com/.../p0700-obd-ii-trouble-code-transmission-control-syste...

obd 11 fault codes Google Search

Jun 28, 2017 | Cars & Trucks

1 Answer

Transmission down shifting to 2 code po 700 or but it does not shift to 3rd gear anymore was resetting it 1st time lasted a month then every 2 or 3 weeks now i can"t reset it anymore no codes


P0700 Transmission Control System Malfunction OBD-II Trouble Code Technical Description Article by Dale Toalston ASE Certified Technician Transmission Control System TCS Malfunction What does that mean? Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory. This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module. Symptoms Symptoms of a P0700 DTC may include: Malfunction Indicator Lamp (MIL) illumination The transmission may exhibit drivability problems like slipping, etc. Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely). Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission. If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself. Register now to ask a question (free) Related P0700 DTC Discussions pt cruiser P0605, P0700, and P1391 What does P0605, P0700, and P1391 mean....I just put in a new catalyst on my car for smog but light engine turned back on...and I can't seem to know what is wrong ...please help me out here... 2002 Dodge Intrepid P0700 & P0841 code my code scanner come up with the codes PO700 and PO841. the 700 code i was told it was the input and output sensors.i had those changed a month and a haft a go. now they are back on and the po841 is on were is the 841 sensor located the machanic i go to tells me my transmission has to be replaced bu... ODB Codes Dodge Caravan 2005 P0700 and P0522 Hello I have a 2005 Dodge caravan and need a fix for these codes please.. P0700 and P0522 came up.. basically ths is stuck in limp mode or 2nd gear.. I am thinking I need a new Transmission Control module.. but can anyone confirm that... 2001 Honda Civic accord p0700 and p0740 Hi I went to get my Honda civic check and p0700 and p0740 codes came up the car has a lil leak But however the car is not slipping or anything. it's not showing no Transmission sign issues. I wanted to know what could possibly be the problem thanks you... 2005 Dodge Caravan P0700 and P0420 I have a 2005 Dodge Grand Caravan.The other day the check engine light came on.I stopped at auto parts store and they checked codes for me.P0700 and P0420 are the codes that came up.What do these mean and why did they show up?My van is running fine.Do I need a tuneup?Or is it something else?I am hop...

Read more at: http://www.obd-codes.com/p0700
Copyright © OBD-Codes.com

May 23, 2015 | 2006 Dodge Dakota

1 Answer

Can a bad idle air control valve cause a P0700 trouble code on a 2001 Volvo S40?


code p0700 refers to transmission control system/MIL--malfunction===causes--wiring--TCM

Code p0700 is a transmission code and you would have gear shifting and other faults.

Aug 23, 2014 | Cars & Trucks

1 Answer

Fault codes p0700


P0700 is a generic transmission fault code. It only means that you have to take it to a shop, so that they can read the fault code with a scanner in the transmission controller.

Aug 16, 2014 | 2004 Jeep Liberty

1 Answer

What does code po700 mean on a cadillac cts 2006


From:


P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.
More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.

Apr 02, 2014 | 2006 Cadillac CTS

2 Answers

What do the codes P1684 and P0700 mean?


Hi Rich Stuck,P0700 means Transmission Control System (MIL Request),P1684 means Battery Disconnected within last 50 starts.More read Diagnostic Trouble Code Table ,hope it can help you.

Dec 08, 2012 | 2002 Chrysler PT Cruiser

1 Answer

1997 honda accord tranmission problem code p0700 drive 4 flashes


Many vehicles have a control module for the automatic transmission called a transmission control module (TCM). The engine control module (ECM) communicates with the TCM to monitor the automatic transmission for faults. If the TCM detects a fault in the automatic transmission and sets a transmission related fault code, the ECM is informed of this also and sets a P0700 in the ECM memory.
This illuminates the Malfunction Indicator Lamp (MIL) to let the driver know there is a problem. If this code is present and the MIL (Malfunction Indicator Lamp) is illuminated that basically means there is at least one transmission code set in the TCM's memory. P0700 is an informational code only. It doesn't point to a direct fault in the engine, only a general fault in the transmission. More diagnosis is necessary to identify what the transmission fault is. This requires a scan tool that will communicate with the transmission module.

Symptoms Symptoms of a P0700 DTC may include:
  • Malfunction Indicator Lamp (MIL) illumination
  • The transmission may exhibit drivability problems like slipping, etc.
Causes More often then not, the cause of this code is that there is a transmission problem of some kind. The TCM detected the problem and set a code. P0700 means that a fault code is stored in the TCM. However this doesn't rule out the possibility of a failed PCM or TCM (unlikely).
Possible Solutions For a P0700 the only real solution is to acquire a scan tool that will communicate with the transmission control module. Extracting this code from the TCM will be the first step in repairing the fault in the transmission.
If the TCM compatible scan tool will not communicate with the Transmission Control Module then that is a good indication that there may be a fault with the TCM itself.

Oct 20, 2012 | 1997 Honda Accord

1 Answer

What is this code p0700


The fault code P0700 means " Transmission Control System (MIL Request).

----------------
OBD2 code reader

Jun 28, 2012 | Chrysler Sebring Cars & Trucks

1 Answer

Engine code reads P1776 1/2 and P0700 transmission


P0700-This Relates to MIL"Malfunction Indicator Lamp")( Request - Control System for Transmission
unable to locate description for P1776,can you get all systems scanned for codes again as 0700 just indicates that a fault has occurred that has lit the check light and logged at the ECU.
Obviously it will be related to the shift fault,maybe a speed sensor or a dirty fluid fault.
Get back to me with any extra info.

Apr 10, 2011 | 1998 Chrysler Town & Country

1 Answer

P0700 Fault Code, what does it mean. How can it be fixed?


P0700 is a code in the ECM telling you there is a code in the transmission. Your scanner needs to be able to check transmission codes to determine the fault.

I hope this helps.

Roy

Nov 05, 2009 | 2002 Chrysler Town & Country

Not finding what you are looking for?
1998 Acura Integra Type R Logo

273 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8211 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...