Question about 2003 Hyundai Accent

1 Answer

How to change the atenator fuse on 2003. accent

The odometer reading stays on after car is shut off when i try starting the car its not getting any fuel but turns over? the altenatoe fuse is blown, could tis be the problem, how do i change it?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 115 Answers

HAVE THE BATTERY TESTED INSTEAD!

Posted on Mar 29, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 14036 Answers

SOURCE: Car won't Statr or shuts off for no reason

check the ignition fuses makes sure they are not loose also check the ignition coil wires make sure they are intact. if your engine is the 3.0 check distributor make sure it isnt loose to throw off your timing.

Posted on Jun 04, 2009

  • 15 Answers

SOURCE: accent 1.5 air fuel mixture problem

Try disconnecting the battery for a while to reset the ECU and see if that helps any. Otherwise I would start checking for vacuum leaks. You can do that by spraying a little carb cleaner around where the suspected leaks would be. If the engine rpms go up then it is burning the carb cleaner off and you have a leak. Check around the intake manifolds and throttle body as well as any air hoses around them.

Posted on Mar 16, 2009

johnny5846
  • 379 Answers

SOURCE: where is fuel filter on 2003 hyuandai accent

remove the rear seat bottom cushion , and remove the fuel tank access cover , remove gas cap to relieve any pressure , remove ground strap and fuel lines from the filter , remove filter ,, to reinstall reverse procedure . cheers.

Posted on Jan 09, 2009

ghost45
  • 1280 Answers

SOURCE: I have hyundai accent 2003. While driving the

#1. Scan for trouble codes. If any, record them and let us know which ones they are.
#2. Connect a fuel gauge to the fuel delivery line at the engine... try to start the engine while monitoring fuel pressure... if there is fuel pressure (approx 35 to 50 lbs), the problem is elsewhere.
If no fuel pressure, check fuel pump relay, fuse, wiring to fuel pump connector (power & ground - use 12volt test light). If power & ground are present, problem is the pump (fuel filter is attached to the fuel pump inside the tank).
#3. Check injectors for injector pulse, check ignition coils for spark to spark plugs.

Posted on Sep 07, 2009

  • 504 Answers

SOURCE: 2005 hyundai accent, won't start...just

check fuel pump when you try to start fuel pump should run if not check fuse./

Posted on Feb 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On light stays on


try removing the fuse for the dash illumination as there are different circuits to the dash , if light goes out then remove the dash and check the circuitry for any signs of corrosion,rust etc bearing in mind this is a soldered pcb , if light stays on it is from the side lights/main light circuit which i would start by making sure the light switch is turning off completely for this you will need a voltmeter or 12volt test light good luck and keep me updated if you wish

Apr 26, 2014 | 2008 Hyundai Accent

4 Answers

Hi, I've an accent crdi 2003. In mornings engine


I would check the catlic converter to see if its not blocked, best thing to do is to go to a exhaust shop and they can do vacume test or tempreature test.

Sep 16, 2011 | 2003 Hyundai Accent

1 Answer

Fuel gauge, odometer, tachometer problems


Check the ground wire, could be corroded.

Jul 18, 2009 | 2003 Toyota Camry

2 Answers

2003 Saturn L300 odometer reads 694,278 miles and


change the whole instrument cluster with one from a wreck.

Jun 10, 2009 | 2001 Saturn L-Series

1 Answer

2003 Hyundai Accent wippers not working


You must have used a wrong fuse in it. Please check some other fuses that might be the problem.

It is a minor issue.

rate this.

Mar 24, 2009 | 2003 Hyundai Accent

1 Answer

2003 chevy impala


replace all the relays (relatively cheap) for all the circuits you are having problems with. There are at least two places the relays are located. on the main fuse panel and on a fuse box in the engine compartment.

After you have replaced them... unhook the battery for about ten minutes to reset the computer.

Robert

Dec 30, 2008 | 2003 Chevrolet Impala

1 Answer

Changing from mile per hour to km per hour


okay,for one,the odometer doesnt read in miles per hr,it reads miles driven, and two i have no idea if its possible to change the odometer to km traveled,if you're talking about the speedometer,its already there,get a european cluster :p

Jul 05, 2008 | 2003 Mazda Mazda6

Not finding what you are looking for?
2003 Hyundai Accent Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...