Question about 2001 Nissan Almera Tino

Open Question

Nissan almera tino problems

My car is taking time to start and it lacks power when driving off but goes fine once moving also some time it makes a squeeling noise

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 3 Answers

SOURCE: Nissan Almera

Drive till it breaks is the best i can tell you...rackenpinion is the problem..

Posted on Sep 24, 2008

Ad
  • 6 Answers

SOURCE: Nissan Almera Tino Diesel 2.1 - Temperature control not working

Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.

Posted on Jun 07, 2009

  • 57 Answers

SOURCE: Radio says Secure on Nissan Almera Tino (04)

Your radio believes that it has been stolen out of the car since battery power was lost to it (as a result of the car battery going dead). There should be instructions in the user manual on how to reset the radio.

Posted on Sep 22, 2009

youredone82
  • 426 Answers

SOURCE: how to find the heater resistor for a nissan

the majority of heater resistors are on the heater box under the passenger ide of the dash, on some very few models it is part of the actual ac control panel

Posted on Oct 28, 2009

  • 1 Answer

SOURCE: how do I remove the service spanner symbol from a

Try this: With the ignition ON but radio OFF, press in and hold the INFO button and turn volume control until the menu appears. Now choose CONFIRMATION and Enter. Go down and select SERVICE and press Enter. Select RESET and then Enter. Backup to the main menu and now turn ignition off. This should remove it.

Posted on Feb 14, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Ivg got a 2005 Nissan Almera Tino 1800 petrol Ive got a problem still, I cant find an OBD reader that works with it,


check fuses and relays --check for power[ fuse ] to the port on quit a few vehicles usually the accessory fuse and obdll port are same ==the following link shows what pins to check with a meter if you have power to the port then start checking your harness,connections and computers
OBDII On Board Diagnostic System Does My Car Have OBD II The Connector...

Sep 11, 2016 | 2005 Nissan Almera Tino

1 Answer

Location of nissan almera tino crankshaft sensor


if you are under the car it should be on the firewall side. It is black piece or a light grey color.

Jan 08, 2016 | Nissan Cars & Trucks

1 Answer

My almera tino has suddenly started to over heat even thou the water and oil levels are fine would this be a problem with the thermostat ?


doubt it --- for sudden problems check items like fan operation if electric, viscous fan hub if fitted, blocked radiator fins / corroded fins, failed cat converter blocking exhaust.
run the fault codes to check for any sensor failure.

Jan 13, 2015 | 2001 Nissan Almera Tino

1 Answer

I replaced timing chain wont start


Confirm the timing marks were aligned properly by manually rotate the crankshaft up until piston number one is on a compression stroke, try to do this twice and make sure that the timing marks should be aligned accordingly with piston number one in top dead centre.

Jul 10, 2014 | 2004 Nissan Nissan almera tino

1 Answer

Nissan almera problems


Its all linked through the radio including the immobilisor so yake it to a local dealer and ask them to have alook

Nov 29, 2013 | Cars & Trucks

1 Answer

When Nissan fb15 losing power in drive. And reverse but have power in park and neutral and engine still on what is the problem


Because an engine revs up freely with no load on it in park and neutral is not a test for loss of power.

Apr 21, 2012 | 2004 Nissan Nissan almera tino

1 Answer

Failed emissions test nissan tino


Mine just failed emissions test garage said its burning oil what is the soulution

Apr 19, 2012 | 2004 Nissan Nissan almera tino

1 Answer

Nissan Almera Tino Diesel 2.1 - Temperature control not working


Hi there, very common on these vehicles, you need to remove the heater cotrols and check that the cable hasn't come out, usually the clips that hold the cables in place break causing the heaters to not work properly, Nissan do modified clips now to stop it from happening, it may need a cable too if its too far bent, hope this helps.

Jun 03, 2009 | 2000 Nissan Maxima

1 Answer

Nissan Almera Tino Right hand side


YEs but if you are going to do some secrifice on your luck of car model from front,

otherwise its impossible,

you can get this from older car dealer or service center,

TNX

May 20, 2008 | 2006 Nissan Z

Not finding what you are looking for?
2001 Nissan Almera Tino Logo

Related Topics:

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...