Question about 1990 Jaguar XJ6

1 Answer

The two back doors for a jaguar xj6 1994 do not, open email afernadez730hotmail.com

Posted by on

  • 3 more comments 
  • afernandez73 Aug 16, 2009

    The back doors, of the jaguar do not, open from inside, but the lock bottoms go up nd down.
    Thanks
    afernandez730@hotmail.com

  • afernandez73 Sep 12, 2009

    The backs doors, do not open from outside nor from inside

  • Mark Glawdecki May 11, 2010

    Do they open from the inside? Do the lock buttons go up and down?

  • Lansing M. Hodges Oct 11, 2012

    I can not get the rear doors open because I had operate the Child safety lock lever on the On position?

  • Lansing M. Hodges Oct 11, 2012

    yes the locks buttons goes up and down but the exterior and interior handling are not responding.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 4 Answers

If the doors will open from the outside, but do not open from the inside - the child safety switches are probably activated. Open the rear doors (from the outside) and slide the small levers next to the doors locks (on the edge of the doors) upwards.

Posted on Sep 12, 2009

  • Lansing M. Hodges Oct 11, 2012

    the doors will not open at all because I applied the child safety lock lever to an On position

×

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Childproof lock


open the doors from the outside and on the inside of the door near where it locks into place there should be a sliding clip

Jun 11, 2013 | 2002 Jaguar X-Type

1 Answer

2003 X tpye Jaguar driver's door will not open from outside -- handle appears to be disconnected- the remote opener stopped working several weeks ago -- key will lock all doors but driver's do


I had the same problem in my 2002 not isn't back I got a tin of wd 40 put the straw applecateter in the key hole and give it a good dose after 10 minute it open did it again now it works fine so I did them soon to make shore try it before you have to pull the door panel apart

Jan 12, 2013 | 2003 Jaguar X-Type

1 Answer

Door will not open 2002 x type jaguar


The cable that goes to the inside door handle has fallen off, you have to remove the inner panel and look at the back of the handle, you should see a cable, most likely the cable fell off the retaining slot. Just push it back on until it bottoms out and replace the panel. This is common with door slamming, on x-types.

May 25, 2012 | 2002 Jaguar X-Type

1 Answer

Rear passenger side door will not open


Have you tried to open it from the back seat? If you have then you will have to take off the cover on the door and there should be a release button. Most covers are easily removed with a flat head screw driver - If your door requires a motor to operate than that is your problem. Hope this helps.

Apr 29, 2009 | 1999 Jaguar XJ

1 Answer

How to program 2000 S type garage door opener


GOTO HOMELINK.COM

THEY MAKE THE SYSTEM AND HAVE INSTRUCTIONS YOU CAN DOWNLOAD.

PLEASE NOTE: NOT ALL BRANDS/MODELS OF OPENER WILL WORK WITH THIS SYSTEM.

HOPE THIS HELPS

Apr 21, 2009 | 2000 Jaguar S-Type

1 Answer

MY JAGUAR CAR WANT OPEN FROM THE OUT SIDE ON THE DRIVER ARE BACK


You have to take the door panel off and there is a small about 6" linkage that has popped out of the inner door handle, I put a zip tie around the rod and the frame to hold it in

Apr 15, 2009 | 1989 Jaguar XJ6

2 Answers

Door Locks on 1990 Jaguar XJ6


try holding the key in the unlock postion longer and maybe even turning it twice to unlock. same with locking hold longer and turning twice.

Mar 01, 2009 | 1990 Jaguar XJ6

6 Answers

JAguar door handles


difficult to open from outside ?  there is a revised link rod for this 

Dec 22, 2008 | 2002 Jaguar X-Type

1 Answer

Jaguar 1988 xj6 3.4


This is a child safetly feature. There should be a small lever on the inside of the door frame on the door itself. You will have to switch it back in order for the handles to function again.

Sep 29, 2008 | 1988 Jaguar XJ6

1 Answer

Programming the garage door opener


Homelink Garage Door Opener Programming Procedure:

The procedure described below was successfully applied to a 2005 Jaguar S-Type.

To begin with, several attempts were made using the programming instructions contained in my Jaguars owners manual. Though the procedure described in the owners manual was straight-forward and understandable, I was unsuccessful in getting the vehicles remote to make my garage door opener function. The particular garage door openers I have are both made by Genie. Both openers utilize the Rolling Code feature.

To begin with, be sure to clear previous codes on your Jaguars garage door opener by first turning (rotating) the ignition key to the I position (first notch). Next, simultaneously hold button 1 (left most button) and button 3 (right most button) down until the middle buttons red light changes from continuous on to a rapid flash. This process takes approximately 20-25 seconds. What follows is a two part process. In the first part, get your Genie portable remote and hold it near (approximately 3 inches away from) your Jaguars garage door opener console buttons. Choose which button on your Jaguars remote you wish to dedicate to your Genie door opener and simultaneously press and hold your Genie opener button and your Jaguars opener button. The red light on your Jaguars center button (button #2) will light up and within 1-2 seconds will begin to flash rapidly. You have just completed part 1 of the two part process.

Part two: Now it is time to utilize the Learn function on your Genie garage door opener. Press the Learn button on your Genie garage door opener. The red LED adjacent to the Learn button will begin to flash. You now have 30 seconds in which to program your Jaguars opener button. Using the same button you just used in the part 1 procedure, press and hold the same button for several seconds. As before, your Jaguars red light in the middle button will light up and within 1-2 seconds, it will flash rapidly. Release the button you are programming. Now, here is the key piece of information! Once again, press and hold that same button. Once again, the center buttons red light will flash rapidly. Release your newly programmed button. This procedure proved successful in my application. Here is what has just happened. The first time you pressed your Jaguars remote button tells the Genie opener that it exists and that it is a viable candidate for making your life easier (opening the damn door). The second time you press your Jaguars remote button confirms to the Genies rolling code that your Jaguars signal is legitimate and is to be trusted from then on.

Jun 06, 2008 | 2003 Jaguar XJ-Series

Not finding what you are looking for?
1990 Jaguar XJ6 Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

76164 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...