Question about 2002 Ford Expedition

1 Answer

How to repair sunroof

Sunroof opens but will not close all the way

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Ford Master
  • 454 Answers

Clean track guides and lubricate with a dry lubricant such as graphite. Make sure all tracks are secured and reset screws as appropriate. A good cleaning tool is an old tooth brush. Simple fix

Posted on Sep 07, 2015

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 314 Answers

SOURCE: My sunroof opens and closes but won't close all

there is something that is going wrong with your mechanical linkage. i would check to make sure that it is still connected and that it does not need to be adjusted.

Posted on Jun 27, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sunroof does not open. Fuse is ok and the shade operates normally.


Do you know how to do automotive electrical testing ?????? How to read a wiring diagrams ???? http://www.bbbind.com/free_tsb.html .Videos on youtube Ohms Law Tech Tip from L1 with Dave Hobbs Copy of Voltage Drop Essentials TST Motor Age The only way to find the problem , testing !

Sunroof Description and Operation (One Connector System)
Sunroof
This diagnostic procedure is to be used for the 1 connector Sunroof System that combines the sunroof control module with the sunroof motor/actuator.
The Sunroof System consists of the following components:
• BATT MAIN 2 Fuse 50 A
• Body control module (BCM)
• RAP relay
• S/Roof Fuse 20 A
• Sunroof module (includes sunroof motor/actuator)
• Sunroof switch
The Sunroof System is controlled by the sunroof switch and the sunroof motor/actuator assembly.
When the ignition is turned to RUN or ACCESSORY, or when the retained accessory power (RAP) system is active, the body control module (BCM) applies a ground to the RAP relay in the instrument panel (I/P) fuse block. This activates the RAP relay and allows battery positive voltage to be applied through the SUNROOF Fuse to the sunroof module. Ground for the sunroof module is supplied from G302.
The sunroof can be placed in 3 preset positions:
• Open
• Vent
• Closed
When the sunroof switch is placed in the OPEN position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch open signal circuit. The sunroof motor/actuator then applies voltage to the sunroof motor open control circuit and applies a ground to the sunroof motor close circuit. The sunroof motor then opens the sunroof to the full open position.
When the sunroof switch is placed in the VENT position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch open signal circuit. The sunroof module then applies voltage to the sunroof motor open control circuit and applies a ground to the sunroof motor close circuit. The sunroof motor then opens the sunroof to the VENT position.
When the sunroof switch is placed and held in the CLOSED position, a ground is applied from the sunroof switch low reference circuit , through the sunroof switch and to the sunroof switch close signal circuit. The sunroof module then applies voltage to the sunroof motor close control circuit and applies a ground to the sunroof motor open circuit. The sunroof motor then closes the sunroof.
The sunroof can be placed in any preferred open position when:
• The sunroof is in the fully opened position by pressing and holding the sunroof switch in the CLOSE position until the panel has reached the desired position then release the CLOSE switch in order to stop the sunroof
• The sunroof is opening, it can be stopped by momentarily pressing either side of the switch.
The sunroof control module, sun roof actuator, and the sunroof motor are integral parts of the sunroof module assembly and are not service separately.

Your best bet , take it to a qualified repair shop or buick dealer .

Feb 10, 2017 | 2010 Buick LaCrosse CXS

1 Answer

WHERE CAN I DOWNLOAD A 2004 CADILLAC CTS REPAIR MANUEL?


Here's a description the sun roof
Power Sunroof System Components
The power sunroof system consists of the following components:
• Sunroof module
• Sunroof switch
• Sunroof motor, with 2 hall effect sensors and limit switch
• Sunroof window
• Sunroof sunshade panel
• Power supply for the sunroof module: RAP 25 A
• Ground G402

Override
The override function is used when needing to force a closing of the sunroof window. To override the system:
Turn ignition to ON.
Rotate the sunroof switch to the close position.
Press upward.
The sunroof switch data 6 circuit, or override circuit, will become grounded at the sunroof module. As long as the sunroof module sees this input, it will continue to slide the sunroof window to close, regardless of the other sunroof switch data circuits inputs.

Oct 28, 2016 | Cadillac Cars & Trucks

1 Answer

2006 Chevy Envoy Denali moonroof stuck open manually close


You mean GMC not Chevy ! Chevy doesn't make the Envoy . There is no way to manually close the sunroof !
Power Sunroof Inoperative
If voltage is not measured on the sunroof switch open signal or sunroof switch close signal circuits, the fault could be in the retained accessory power (RAP) supply voltage circuit, battery positive voltage circuit, or sunroof motor ground circuit. If the sunroof motor is not being powered, neither will the sunroof switch signal circuits.

2

Attempt to operate the sunroof through its full range of functions in order to verify that the power sunroof inoperative fault is present.
Does the power sunroof system operate normally?
--
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems
YES - Go to Step 3

3
Is the sunroof in the fully closed position?
--
YES - Go to Step 4
NO - Go to Step 7

4
  1. Disconnect the sunroof switch.
  2. Turn ON the ignition, with the engine OFF.
  3. Connect a 3-amp fused jumper wire to the low reference circuit of the sunroof switch harness connector.
  4. Connect the other end of the 3-amp fused jumper wire to the sunroof switch open signal circuit of the sunroof switch harness connector, for 3 seconds.
Did the sunroof open?
--
YES - Go to Step 17
NO - Go to Step 5

5

  1. Disconnect the 3-amp fused jumper wire.
  2. Measure the voltage from the sunroof switch open signal circuit of the sunroof switch harness connector to the low reference circuit of the sunroof switch harness connector.
Does the voltage measure near the specified value?
B+
YES - Go to Step 13
NO - Go to Step 6

6

Measure the voltage from the sunroof switch open signal circuit of the sunroof switch harness connector to a good ground.
Does the voltage measure near the specified value?
B+
YES - Go to Step 14
NO - Go to Step 10

7
  1. Disconnect the sunroof switch.
  2. Turn ON the ignition, with the engine OFF.
  3. Connect a 3-amp fused jumper wire to the low reference circuit of the sunroof switch harness connector.
  4. Connect the other end of the 3-amp fused jumper wire to the sunroof switch close signal circuit of the sunroof switch harness connector, for 3 seconds.
Did the sunroof close?
--
YES - Go to Step 17
NO - Go to Step 8

8

  1. Disconnect the 3-amp fused jumper wire.
  2. Measure the voltage from the sunroof switch close signal circuit of the sunroof switch harness connector to the low reference circuit of the sunroof switch harness connector.
Does the voltage measure near the specified value?
B+
YES - Go to Step 15
NO - Go to Step 9

9

Measure the voltage from the sunroof switch close signal circuit of the sunroof switch harness connector to a good ground.
Does the voltage measure near the specified value?
B+
Go to Step 14
Go to Step 10

10

  1. Disconnect the sunroof motor harness connector.
  2. Measure the voltage from the battery positive voltage circuit of the sunroof motor harness connector to a good ground.
Does the voltage measure near the specified value?
B+
Go to Step 11
Go to Step 19

11

Measure the voltage from the retained accessory power (RAP) supply voltage circuit of the sunroof motor harness connector to a good ground.
Does the voltage measure near the specified value?
B+
Go to Step 12
Go to Symptoms - Computer/Integrating Systems in Computer/Integrating Systems

12

  1. Turn OFF the ignition.
  2. Measure the resistance from the ground circuit of the sunroof motor harness connector to a good ground.
Does the resistance measure less than or equal to the specified value?
5 ohms
Go to Step 16
Go to Step 20

13

Test the sunroof switch close signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

14

Test the sunroof switch low reference circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

15

Test the sunroof switch open signal circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

16

Test the appropriate sunroof switch signal circuit for an open. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 18

17

Inspect for poor connections at the harness connector of the sunroof switch. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 21

18

Inspect for poor connections at the harness connectors of the sunroof motor. Refer to Testing for Intermittent Conditions and Poor Connections and Connector Repairs in Wiring Systems.
Did you find and correct the condition?
--
Go to Step 23
Go to Step 22

19

Repair the short to ground or open in the sunroof motor battery positive voltage circuit. Refer to Wiring Repairs and Connector Repairs in Wiring Systems.
Did you complete the repair?
--
Go to Step 23
--

20

Repair the open in the sunroof motor ground circuit. Refer to Wiring Repairs and Connector Repairs in Wiring Systems.
Did you complete the repair?
--
Go to Step 23
--

21

Replace the sunroof switch. Refer to Sunroof Switch Replacement .
Did you complete the replacement?
--
Go to Step 23
--

22

Replace the sunroof motor. Refer to Control Module References in Computer/Integrating Systems.
Did you complete the replacement?
--
Go to Step 23
--

23

Operate the system in order to verify the repair.
Did you find and correct the condition?
--
System OK
Go to Step 2

Jul 31, 2016 | Cars & Trucks

1 Answer

SUNROOF ISSUE HELP!!!


Fixing sun roof problems is a nightmare even with the manuals and a trained tech doing the work, you will need the dealer to repair this.

Sep 20, 2012 | 1999 Lexus Gs 300

1 Answer

03 Jeep Liberty Sport sunroof wont close.


03 Jeep Liberty sunroof wont close. I have 4 sunroof buttons; Open, Close, Vent and ASC. Open and Vent buttons are working fine. Close button is not responding. ASC button is flashing red and green but does nothing when pushed. I have no way to get it closed

May 08, 2010 | 2003 Jeep Liberty

2 Answers

2003 tiburon power sunroof won't close all the way . It'll open all the way but starts to close & then stops.


sounds like the metal deflector in front of the sunroof,is separated and caught in the roof mechanism, however there are other issues that can cause that condition, it can be anything from a bad sunroof switch to the sunroof tracks jamming, start with looking to see if there any obstuctions in the track..the sunroof mechanism can get costly to repair.

Oct 25, 2009 | 2003 Hyundai Tiburon

1 Answer

1999 Oldsmobile Bravada I opened the electric sunroof and it went back farther than normal and made a loud clicking noise then when I tried to close it it will only go 1/4 of the way closed and stop I can...


welcome to the club.

i am going to give you the link to my oldsmobile aurora sunroof repair write up. it will explain what has happened to your sunroof and how to fix it.

the oldsmobile aurora and the bravada use the same exact sunroof

http://aurorah.proboards.com/index.cgi?action=display&board=1stgen&thread=16095

Apr 12, 2009 | Oldsmobile Bravada Cars & Trucks

3 Answers

Open sunroof that will not close.


you can open and close you sunroof "manually" remove the plastic cover next to your sunroof and dome light buttons (above your rearview mirror) there is an allen wrench stored inside... insert the wrench into the corresponding hole and you can close or open you sunroof by turning the wrench

Nov 29, 2008 | 2000 Volkswagen Jetta TDI

1 Answer

Sunroof won't close


clean the runners on the sunroof watching out for trapped debris. try lubricating the runners with a fine lubricant with a clothe, make sure no debris caught in motor also.

Sep 07, 2008 | 1994 Jeep Grand Cherokee

Not finding what you are looking for?
2002 Ford Expedition Logo

Related Topics:

181 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...