Question about 1989 Chrysler Fifth Avenue

1 Answer

Change master cylinder - 1989 Chrysler Fifth Avenue

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 210 Answers

Brian, I need more info than you have given here. I need to know if you have the new, (rebuilt), master cyl. already or if you're just looking for the instructions on how to accomplish the actual exchange. You may contact me at "fixitcr63@yahoo.com", and I'll be happy to walk you through the procedure. Corky

Posted on Jul 06, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I replace master cylinder?


Hi,

I agree with Howard but why are you changing the Master??

Dec 10, 2015 | Cars & Trucks

1 Answer

1993 4wd. Why aren't brakes working?


Does the brake pedal go to the floor? Or does it stay up, and is hard to push...? Did you bleed the master cylinder? Also, you will need to bleed all 4 wheels connection to the brake wheel cylinders...you must start with the rear, farthest from the master cylinder, then other rear, then front farthest from the master cylinder, then other front...the bleeding of each line is a must, since you switched the master cylinder.

Sep 14, 2015 | GMC Sierra 1500 Cars & Trucks

1 Answer

I changed the master cylinder bleed the lines still soft pedel


What kind of vehicle? Why did you change the master cylinder? Did you bleed the master cylinder before you installed it? Is there any brake fluid leaks in the system? If you have rear drum brakes, are they adjusted properly? More info is needed in order to help you properly

Apr 05, 2015 | Cars & Trucks

1 Answer

Brake master cylinder fluid leaking out


Replace master cylinder or take out old one and have it rebuilt, then put it back in. Don't skimp on brake work..it may kill you, but much much worse...it may kill me if you get it wrong!

Jun 22, 2014 | 1999 Nissan Pathfinder

1 Answer

How to change a clutch master cylinder on a 2006 toyota tacoma


remove line from the side of clutch master cylinder two bolts or nuts on firewall inside vehicle is a pin on the upper side of clutch remove and pull old unit out bench bleed new master by filling and pressing in on the piston of the master cylinder. if you dont have a hose fitting dont bench bleed bleed it in vehicle( this method takes longer) install back in vehicle and hook it all back up torque bolts to 25 ft lbs then bleed the slve cylinder from under vehicle near back of motor just like bleeding brakes pump up hold and release the line pressure by opening valve on slave cylinder.

Apr 06, 2013 | 2006 Toyota Tacoma

2 Answers

1999 buick century brake pedal goes to floor-put new master cylinder on and blead both brake lines and master cylinder and pedal still goes to floor


Sounds like you may have a hydraulic leak somewhere. Check the rear wheel cylinders and front brake hoses going to the calipers.

Jan 26, 2012 | 1999 Buick Century

2 Answers

I change my master cylinder for my brakes and now I have no brakes what could be my problem to that


you must have a lot of air in system. the brakes need bleed to let the air out of system. did you bench bleed the master cylinder before putting it on car ! if not thats why no brakes. to bench bleed a new master cylinder, put it in a vise. fill it full or the proper level of brake fluid. push on the plunger with a dowel or another object. pump it till all air is out of master cylinder, you can tell when no air. it will be all fluid coming out of cylinder. keep checking brake fluid in master cylinder.make sure you push plunger in all the way.when all air is gone replace on car. if you do not loose any fluid from the master cylinder lines, then you can replace it without having air in system. bleed each wheel if needed. good-day!

Jul 10, 2011 | 2006 Chevrolet Impala

2 Answers

Tried to bleed brakes after replacing caliper-no brake fluid will flow out- is the master cylinder the problem?


Well, if you change a caliper or a brake line the fluid in the master cylinder should remain, even if the fluid leaks out.

However, if you are having trouble bleeding regularly, then use a vacuum pump with a 'can' or use a pressure bleeder (I prefer this method) that costs about $55 or so available on the Internet.

If you use a pressure bleeder, you'll need an extra master cylinder cap that has a hole drilled in it to accomodate the fittings of the pressure bleeder.

I know someone who had a Lincoln Continental that changed a brake line and had trouble bleeding it, and they used a vacuum pump and it bled easily using that method.

Some cars require that when you change the master cylinder, a brake scan tool is required to bleed the master cylinder that has air in it. But, if you did not replace the master cylinder, you should be able to use either the vacuum or pressure method to bleed the brakes easily.

Good luck on this repair.

Dec 18, 2010 | GMC Sierra 1500 Cars & Trucks

1 Answer

How to change the master brake cylinder


HI
Remove the 2 brake lines from the master cylinder,,,,
Remove the 2 bolts that hold the master to the brake booster...
Remove the master cylinder...
Install the new mastercylinder...
install the 2 bolts removed....
bleed the master with bleed kit that comes with the new master...
install the 2 brake lines..
bleed brakes.....
Let me know if i can help more

Jul 15, 2010 | 1992 Chrysler Town & Country

2 Answers

I have no pressure in my brake lines. I had changed the master cylinder and still no change when bleeding the lines.I also put new wheel cylinders on. I have a 1999 mercury sable


Make sure youre bleeding the lines correctly. Also you may have purchased a faulty master cylinder, trust me on that i bought two back to back and they were bad batch. check for cracked lines throughout the system.

Nov 06, 2009 | 1999 Mercury Sable

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

19 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8522 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...