Question about 2008 Peugeot 307cc 1.6

1 Answer

Diagnosis read fault p336

The car does not drive smooth and read p0170, p0140,p0336, p0352,p0414,p0351,p1161,p0138,p463,p400

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Peugeot Master
  • 1,373 Answers

P0140 - 02 sensor circuit no activity detected, (bank 2 sensor 1)
P0170 - fuel trim malfunction (bank 1) MM6LP - fuel injection fault
P0336 - Crankshaft Position Sensor A Circuit range/performance SID801/4 - Engine speed signal coherence.
P0352 - Ignition coil B Primary/secondary circuit malfunction MM6LP - 2/3 ignition coil control. Open circuit, short circuit to positive, short circuit to earth. ME746 - NO.1 Ignition coil control function. Short circuit to earth. ME746 - NO.2 ign. coil control function. Short circuit to earth.
P0414 - Secondary Air Inj. system switching valve A circuit shorted. MM6LP - Air pump relay control failure.

Posted on Mar 21, 2014

  • 3 more comments 
  • Nicola Conroy Mar 21, 2014

    PO351 - P0351 Ignition Coil A Primary/Secondary Circuit Malfunction ME746 - No. 1 ignition coil control function. Short circuit to earth.

  • Nicola Conroy Mar 21, 2014

    P0138 - P0138 O2 Sensor Circuit High Voltage (Bank 1 Sensor 2)

  • Nicola Conroy Mar 21, 2014

    P0400 Exhaust Gas Recirculation Flow Malfunction EDC15C2 - EGR solenoid valve. Consistency with air flow. / Air flow higher than recommended.

  • Nicola Conroy Mar 21, 2014

    PP1161 S2000PM1 - Throttle position copy.

  • Nicola Conroy Mar 21, 2014

    P0463 - P0463 Fuel level Sensor Circuit High Input ME7.4.4 - Low fuel level. Signal short circuit to positive, open circuit. S2000PM1 - Fuel sender signal open circuit.

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Misfiring. Error codes p0306, p0351, p0352


p0306 refers to cylinder 6 misfire detected===causes engine mechanical fault--wiring---ignition/fuel system--injector ---ECT/MAF sensor---ECM
IF there was a mechanical fault (hydraulic follower ) or valve it would be there most of the time and not just on start up. Possible injector fault but I would be inclined to check out the MAF sensor codes p0351 &2 refer to ignition coil A and ignition coil B primary /secondary--circuit malfunction === causes --wiring--ignition coil--ECM ( all causes for the both)
going on this check out the coils and check that the wiring and connections are clean and tight. basically I would be inclined to change out the coils and check /replace the MAF sensor.
change the engine --sounds like advice to get some extra money out of you.

Apr 27, 2014 | 2005 Ford F-150

1 Answer

2007 Mercury Milan Premier V6 Misfiring


P0300 - Random multiple cylinder misfire
P0301 , 302 and 304 - Cyliners 1, 2 and 4 misfire
P0351 - Ignition coil A primary/secondary circuit malfunction
P0354 - Ignition coil D primary/secondary circuit malfunction

Nov 07, 2013 | Mercury Milan Cars & Trucks

1 Answer

I have a 2001 jeep grand cherokee and it giving me four code p1391 p0351 p0352 p0353 i will like to know the problem please


For some reason you question has been duplicated several times, so I will answer this one.
Code 1391 may be a problem with the ABS system, the other three codes are concerning the first 3 coils. Your engine has direct spark so each cylinder has its own coil.
I would clear the codes and see which ones come back after a test drive. If the three coil codes come back the coils would need to be tested.

Dec 19, 2012 | 2001 Jeep Grand Cherokee

1 Answer

Check engine light P336


Are you sure this isn't P0336, P336 is not a vaild code not enough numbers.
P0336 ISUZU - Crankshaft Position Sensor Performance
Possible causes- Crankshaft position sensor harness is open or shorted
- Crankshaft position sensor circuit poor electrical connection
- Faulty crankshaft position sensor
- Signal plate may be damage
- Starter motor may be faulty
- Starting system circuit
- Dead or weak battery Tech notes Sometimes and in some models, low battery voltage or a weak starter can can trigger a Crankshaft Position Sensor code. Before replacing any parts, recharge or replaced battery

Sep 07, 2012 | 2000 Isuzu Rodeo

1 Answer

Codes p0340 p0353 p0352 p0351 p1391


Kevin, can you give me a little more to work with? I would like year, make and model of your vehicle along with any other symtoms you may have experienced. Please get back to me with this information, and don't start replacing parts that you may not need. Waiting on your response.

Oct 18, 2011 | Cars & Trucks

1 Answer

2003 vw jetta gl 2.0 have codes p0351,p0352 and p0353


p0351- ignition coil A primary or secondary fault
p0352- ,, ,,,,,, ,,,,, B ,,,,, ,,,,,,, ,,,,,,,,,,,,, ,,,,,
p0353 - ,,,,,,,,,,,,, C,,,,,,,,,,,,,, ,,,, .,,,,,,,,,,,,,,,,
you may have a problem with yuor ingnition system

Sep 30, 2009 | 2003 Volkswagen Jetta TDI

3 Answers

Misfiring


Have your ignition coils replaced

Sep 04, 2009 | 2002 Dodge Stratus

1 Answer

Fault codes P351, P352 and P353. van will not start but cranks


  • P0351 Ignition Coil 1 Control Circuit
  • P0352 Ignition Coil 2 Control Circuit
  • P0353 Ignition Coil 3 Control Circuit 1 Control Circuit
  • Sep 03, 2009 | 2001 Dodge Caravan

    1 Answer

    HELP! Problems on my 1997 Grand Caravan P1698, P0138, P0140


    you need to go over your entire wiring harness, under the hood and inside the dash. Start with the ground wire on the battery and work your way inside. It sounds like there is a loose ground wire somewhere

    May 06, 2009 | 1999 Plymouth Grand Voyager

    Not finding what you are looking for?
    2008 Peugeot 307cc 1.6 Logo

    306 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Peugeot Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22095 Answers

    Wahs Team

    Level 2 Expert

    205 Answers

    yadayada
    yadayada

    Level 3 Expert

    75066 Answers

    Are you a Peugeot Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...