Question about 1998 Isuzu Amigo

1 Answer

Oil light flickers on and off, and is also leaking below.

Locate oil pump on 1998 isuzu rodeo/amigo 2.2 engine

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Expert
  • 103 Answers

Oil pump is attached to the bottom of the engine. you have to remove the oil pan to get to it. Chgeck your filter first before assuming the oil pump is baf. A clogged filter can cause the same light to go on.

Posted on Mar 21, 2014

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

1998 Isuzu Rodeo. My ac stopped working and is leaking coolant. Having a hard time finding the leak. Pulled the timing cover off but don't see fluid coming from the water pump.


Go to the dealer and have them put a dye in the radiator. Run and drive vehicle. Take vehicle back to dealer they will use a UV light and determine the location of the leak. I have done this several times to multiple vehicle and it works all the time. The dye will glow.

Jan 21, 2017 | 1998 Isuzu Rodeo

1 Answer

Isuzu amigo with oil light on when idling


Hi there
could mean 1 of 2 things oil sender unit is faulty or oil pressure is low, you will need to have it checked by a mechanic

Aug 27, 2014 | 1998 Isuzu Amigo

2 Answers

Where is the obd port on my 1993 isuzu Amigo


wow no engine size stated, and MATTERs.!
with no tech1 or 1a scan tooL (real scan tools)
what good is DLC?>
sure jumper CODES< (DTC errors in todays parlance)
there is abs tool.. but only on some cars.

and more. read the FSM yet?
lets pretend you said how do i get the PCM flash error codes
easy jumper the DLC. 'diag, link connector"

google Isuzu DLC jumpers, nets you all this.

http://www.troublecodes.net/isuzu/

there is no world standards for OBD1 so DCL are
every freakn where.

in cab or engine bay or like hondas, on PCM casiing
wild and wolly DLC>


quote

Multi-Port Fuel Injection

Amigo,Trooper II , Rodeo & Pickup
On Rodeo, Amigo, and Pickup (except 1993-95 models W/3.2L engine), connect the single wire diagnostic leads located behind the left hand kick panel together. On 1993-95 Rodeo models W/3.2 engine, the data link is located under the left hand side of the instrument panel. On all models, turn the ignition switch to the On position. At this point, the "Check Engine" light should flash. codes


25011203-uqsqk1sqel1nykdqv4diatnw-3-0.jpg 12pin version below.
jump pins,(for PCM errors) pins A > B
25011203-uqsqk1sqel1nykdqv4diatnw-3-1.gif
the codes are here.
http://www.troublecodes.net/isuzu/iszucel/





25011203-uqsqk1sqel1nykdqv4diatnw-3-3.jpg see no in the engine bay at all, like the 1 guess

Aug 26, 2014 | 1993 Isuzu Amigo

1 Answer

What would make a Isuzu amigo to suck to much air, and idle high?


You need to check the coil packs, O2 or to lower the idle by loosening nut on back of jets and adjusting screw until idle is set as low as you want it but I would suggest 5-7 MPH. Tighten nut to lock in screw. This is a mechanic's cheater adjustment that takes less then 2 minutes to do.

May 22, 2014 | 1998 Isuzu Amigo

2 Answers

Start engine and engineine pops for couple of


Have the ABS pump ECM checked (it is separate from the main ECM), try to catch it early. I bought a transmission last year. This is typical 98-02 Rodeo behavior.

Aug 01, 2010 | 2000 Isuzu Rodeo

1 Answer

Where is the water pump on 98 isuzu rodeo? How do you know it is bad?


on a v6 it is turned by the timing belt in the center front of engine just below the heads. They leak.

Jun 10, 2010 | 1998 Isuzu Rodeo

1 Answer

How do you read the oil stick on a 98 isuzu amigo


with the engine off pull the dip stick out wipe it off and put it back in the pull it back out if the oil is at the top hole it is good if it is at or below the bottom hole it is at least one quart low

Jan 13, 2010 | 1998 Isuzu Amigo

1 Answer

2001 Isuzu Rodeo 3.2 V6 Oil Burning and motor tapping loudly


Do a compression test on all the cylinders and see if the rocker arms are adjusted to the right. If the compression is bad then there will be no power at all and if the Rocker arms need adjustments you could be losing some power there too.
You can try cleaning out the engine from the inside out. I have done this many times when I buy a use car. I run Marvel Mystery Oil with the engine oil for about 4 months and keep an eye on the oil level. Marvel is a thinner oil and clean out the inside by removing the carbon collected and oil sludge inside the engine.
You may end up having to replace the oil pressure sensor, it seams to always be the first to go bad and may get some oil leaks. But once the engine is cleaned up you'll have a better understanding on the condition on the engine and be surprised on how well it runs after.
Just keep an eye on the oil level and change the oil and filter to free up the engine, then use the recommended oil and add Lucas oil and or Restor to help the loose of compression.
The loud tapping tells me that your not getting the oil to the top of the engine and that may be a bad oil pump but it may also be a plugged oil pump screen and the Marvel Mystery oil will clean up the oil screen.
Good luck and hope this helps, Keep me posted on your Rodeo.

May 22, 2009 | 2001 Isuzu Rodeo

1 Answer

Thermostat on 1998 Isuzu Amigo


Yes, It's under the intake manifold. The manifold would need to be removed Lower hose from radiator is attached to steel pipe leading to it. It will not be an easy mission,and the new thermostat is rated for I believe 170 degrees. That's not much help to keep the interior warm with a rag top when it's 20 below zero.

You can boost the heating level by adding vinyl cover over the front portion of grill. Any boat interior shop has the material. Modify any large air leaks. Use the fan to keep fresh air filling vehicle, not recirculate.

Jul 14, 2008 | 1998 Isuzu Amigo

Not finding what you are looking for?
1998 Isuzu Amigo Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...