Question about 2000 Ford Mustang
The passenger window only operates from the drivers side switch, not the pass side
Window motors are permanent magnet style they use to wires that reverse polarity to move in both directions. so remove passenger switch it should have four wires 2 are for the motor and the other 2 is battery positive and battery negative test these wires first. we know the motor works so the only other problem would be the switch it self. most common failure is where the wires enter the door in between the hinges in that loom they break..
Posted on Mar 21, 2014
Testimonial: "I'll check out those wires--Thanks"
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: 92 F150 power window and locks
try taking apart and cleanig all contacts first. make sure you are getting power to switch. Sounds more switches are going bad. They usually last about 5 to 7 years before they start going out.
Posted on Jun 11, 2008
The first thing you should do is swap the passenger switch in place of the drivers switch and then see if the window now works. If so then you need a new drivers side switch. It may be clicking but it may not be working.
If it still doesn't work then you need to get your hands on a volt meter and get back to me.
You need to remove the drivers door panel and investigate the window mechanism, it sounds asthough its sticking.
Very best regards
Posted on Jun 20, 2008
Hopefully by now you have resolved your problem but my truck had that problem and I had to replace the motor for the window controls.
Posted on Nov 19, 2008
SOURCE: power windows
I had the same problem alot with a 95 Windstar. you need to replace some relays in the fuse panel under the dash. it should be labeled on the cover. unfortunately i've since sold the van... but i believe you need to replace the one touch down relay.
Posted on Mar 18, 2009
replace the switch. They have parts made of plastic pressing on the contacts softing these babies up making them useless in a few years
Posted on Jan 20, 2010
Tips for a great answer:
Jun 29, 2017 | Cars & Trucks
Feb 24, 2015 | 2009 Chevrolet HHR
Mar 31, 2014 | 2008 Toyota Yaris
Jun 16, 2012 | 2004 Toyota Tundra Cab
May 24, 2010 | 2005 Chrysler 300
Oct 12, 2009 | 1995 Nissan Quest
Jun 10, 2009 | 2001 Pontiac Grand Am SE
40 people viewed this question
Usually answered in minutes!