Question about 2002 Ford Windstar Cargo

1 Answer

Both rear door speakers don't work 03 windstar

Both rear side door speakers have no sound

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 62 Answers

Bad head unit

Posted on Mar 23, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 972 Answers

SOURCE: rear hatch door sensor location on 1998 windstar

most rear hatch switches are on the latch itself, inside the door

Posted on Mar 25, 2010

  • 209 Answers

SOURCE: 03 Ford Explorer (Eddie Baurer) rear defrost/door ajar problem

If all that happens than i think you should take it in because a short could lead to more problems

Posted on Apr 07, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The wiring route for rear speakers. Front to back on 1990 Oldsmobile tornado/trofeao


The wires run under the door opening sill plates, usually on the drivers side but check both sides.

The wire colors should be as below.

Left Rear Speaker Positive Wire (+): Brown
Left Rear Speaker Negative Wire (-): Yellow
Right Rear Speaker Positive Wire (+): Dark Blue
Right Rear Speaker Negative Wire (-): Light Blue

Dec 05, 2016 | Oldsmobile Cars & Trucks

1 Answer

2012 maxima rear speakers not working


Pull the unit out from the dash and check the wires first. Most aftermarket untils have a two pair of holes on either side, use nails to insert into the holes and press to release the unit after you get the fascia off. Check the wires carefully. Try taking one of the rear speakers out and plug the connectors from a door panel speaker on it to see if the speaker is good. If the speakers are bad, replace them. Crutchfield sells replacements you know will fit properly. Check the ground wires too!

Feb 25, 2015 | 2012 Nissan Maxima 3.5 S Sedan 3.5L V6 CVT...

2 Answers

What would cause the driver side front door speaker and the passenger side rear deck speakers not to work. When if fade the sound all the way to the front with no sound in rear and with the balance turned...


Check the speakers if they work. Connect the speaker terminals using a short wire to a 1.5 volt battery (AA or any dry cell batter) and listen if there's a thumping sound when the wires are connected to the battery terminals. If there's no sound, your speakers are busted. If there's a sound, check if the wires are okay. Use the same method with the battery with the wires from the back of your stereo. Make a small cut on the wire and attach the short wires you used earlier.

Nov 04, 2013 | Cars & Trucks

1 Answer

03 ford windstar passenger door is closed but says its not closed what do i do?


there are sensors inside then the door located on the latch,need to change the bad one

Feb 09, 2013 | 2003 Ford Windstar

1 Answer

MY REAR SPEAKERS ON FOCUS 2007 HVE STOPPED WORKING DOES ANYONE KNOW WHAT FUSE COVERS THEM SO I CAN CHECK IF BLOWN ?


There is no fuse to the speakers your rear speaker wires should run under the kick plateon drivers side broken or disconnected wire or burned out channel in radio.

Oct 21, 2012 | Cars & Trucks

1 Answer

How to replace rear door speakers for 1997 GMC jimmy


I think your GMC have in-door rear speakers.!!
  • Look for screws in door panel or around the speaker vents.
  • If you are sure that the speaker cant be removed without opening the door panel then read this below.
  • Mostly seen near areas like door lever(inside), power window switch set, bottom and each sides of the whole panel.
  • If its manual window, then look for a circle clip in between the winding window lever and the door panel. Plunge screw driver between them a make a gap then look.
  • Assure that all clips or screws which obstacles the removal of the panel.
  • Simply pull the panel from sides towards you
  • If its completely open, then locate the speaker and unscrew it.
  • Check the connection wires for quality
  • Mostly its good to scratch the leads of the wire to remove copper oxide layer
  • Take the new speaker, check the holes on the door matching the speaker's
  • If needed, drill hole for screw and be sure that the new speaker is not more than 15cm diameter.
  • Connect the leads, fix the speakers.
  • Check the sound clarity with your car audio on.
  • If everything is perfect.. go on , fix the door panels
  • Mainly sure with the side clips of the panel, do not bent or break them.
  • Check for any balance parts or screws.
  • Screw everything back as normal.
  • You just installed a new speaker....
  • pls rate it!!

Sep 23, 2011 | 1997 GMC Jimmy

1 Answer

Need to know whats the size and the best speakers for my ford windstar


1995-1998: 5" x 7" Front door and side panel
1999-2003: 6" x 8" Front and rear door


Jun 14, 2011 | 2001 Ford Windstar

1 Answer

Factory color coding for stereo


Windstar Car Stereo Radio Wiring Diagram - All years
Car Radio Constant 12v+ Wire: Green/Violet Car Radio Switched 12v+ Wire: Yellow/Black Car Radio Ground Wire: Black/Light Green Car Radio Illumination Wire: Green
Left Front Speaker Positive Wire (+): Orange/Light Green Left Front Speaker Negative Wire (-): Light Blue/White Right Front Speaker Positive Wire (+): White/Light Green Right Front Speaker Negative Wire (-): Dark Green/Orange
Left Rear Speaker Positive Wire (+): Light Brown/White Left Rear Speaker Negative Wire (-): Light Brown/Yellow Right Rear Speaker Positive Wire (+): Light Brown/Green Right Rear Speaker Negative Wire (-): Brown/Pink

Speakers
1995-1998: 5" x 7" Front door and side panel 1999-2003: 6" x 8" Front and rear door

Feb 17, 2011 | 2003 Ford Windstar

1 Answer

Need instructions to replace the passenger side mirror and the driver side tail light on a 1999 Ford Taurus 4-door sedan. Thank you, Gary S.


Section 01-09: Mirrors, Rear View 1999 Taurus/Sable Workshop Manual REMOVAL AND INSTALLATION Procedure revision date: 06/25/1998 Mirror, Power-Outside Rear View Removal
  1. Disconnect battery ground cable (14301).
  1. Remove front door trim panel (23942). Refer to Section 01-05.
  1. Remove radio speaker grille from cover assembly by squeezing or pinching between thumb and index finger.
  1. Remove two screws from cover assembly.
  1. Disconnect outside rearview mirror wiring connector (C515-LH; C615-RH). Remove wiring guides as necessary.
  1. Remove three outside rear view mirror retaining nuts. Remove outside rear view mirror (17682) while guiding wiring and connector through hole in door.


an0786b.gif


Item Part Number Description 1 17682 Outside Rear View Mirror 2 N621906-S36 Nut (3 Req'd) 3 F8DB-17D699-
AAW Cover Assembly Rear Substrate-LH 3 F8DB-17D698-
AAW Cover Assembly Rear Substrate-RH 4 N808968 Screw 5 F8DB-18B984-
AAW Speaker Grille-Standard (No Badge)-LH 5 F8DB-18985-
AAW Speaker Grille-Standard (No Badge)-RH 5 F8DB-18K901-
BAW Speaker Grille-Mach-LH 5 F8DB-18978-
BAW Speaker Grille-Mach-RH 5 F8DB-238A35-
AAW Speaker Grille-Blank (No Speaker)-LH 5 F8DB-238A34-
AAW Speaker Grille-Blank (No Speaker)-RH A - Tighten to 6-8 Nm (54-70 lb-in) ------------------
Trim Panel, Door Front
Removal
  1. Remove cover behind inside door handle.
  1. Remove screw from bottom of pull cup retaining front door trim panel to front door (20124).
  1. Remove three screws retaining front door trim panel to front door.
  1. NOTE: Do not attempt to remove more than one pushpin at a time.

    Using Rotunda Windshield and Molding Trim Removal Kit 107-R0401 or equivalent, remove the door trim panel by pulling one door trim panel pushpin at a time from the inner door skin.
  1. Disconnect electrical connectors as necessary. Refer to Section 01-14A.
Installation
  1. Follow removal procedure in reverse order.
  1. Replace all pushpins with new pushpins (N808994-S).
Front Door Trim Panel


ar0318d.gif

Jan 14, 2011 | 1999 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

75197 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

fordexpert

Level 3 Expert

5481 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...