Question about Cars & Trucks

Open Question

LED model GP5-3268 Cannot reset date, time and alarm.

Cannot reset the clock

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i find the anti theft reset button on 2006 taurus


this is for a 2003, might work.

1
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

2
Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

3
To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.

Jun 13, 2016 | 2006 Ford Taurus

2 Answers

How do I disarm anti theft device on a 2001 ford taurus


SEE THE STEPS WITH CAREFULLY AND COMMON SENSE:God bless you
Press the unlock button on your vehicle's key fob to deactivate the alarm. If you've misplaced your remote for the car, use the PATS programmed key to unlock the driver's side door. Then, put the key in the ignition and turn the key to the "on" position. The vehicle's battery should be on, but the engine shouldn't be running.

  • 2 Locate the override button on the alarm box, beneath the driver's side of the dashboard. Press the button and hold it in until the alarm beeps one time. The LED light for the alarm should stop blinking, indicating the anti-theft system is disabled.

  • 3 To reset the vehicle's alarm, put the PATS programmed key in the ignition and turn the key to the "on" position. Press the override button. When the alarm resets, it chirps two times and the LED light begins blinking.



  • 7_25_2012_6_49_12_pm.gif

    Jul 25, 2012 | 2001 Ford Taurus

    2 Answers

    My radio, car alarm, interior lights do not work on my 2006 subaru tribeca


    The solution for the interior lights temp gauge etc. not working is the fuse under the hood as mentioned above.
    As for the clock resetting, your battery is probably about to go. The tribeca turns off power to the vehicle if voltage drops below a certain level to save enough power to start back up. This causes the clock to lose memory.

    Mar 30, 2012 | 2006 Subaru B9 Tribeca

    1 Answer

    After battery change on my 2001 avalon the time/date reset to default even I set the time/date correctly then turn off the ignition and turn back on again then the time/date reset to default again .


    If some connections were changed then the ALWAYS ON +12 volt to the clock circuit back up is not powered all the time . check if while the battery was changed if there was any link that was disconnected that is the continuous supply to the clock.

    Jul 02, 2011 | 2001 Toyota Avalon

    1 Answer

    Just bought a x reg ford puma but the key fob does not work, bought a new battery and fitted it, needs re-programming but don't know how to do it.


    Telephone: Fax: VAT Registration No.:
    Infrared remote control
    NOTE: Infrared emitter can be seen at front edge of key.
    System operation
    Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds. Pressing key lock button once activates central locking and alarm. Pressing key lock button twice within 3 seconds activates double locking system.
    Programming
    When
    Key batteries completely discharged. Key batteries not replaced within 15 seconds. Key added or replaced. System malfunction.
    How
    Obtain all keys fitted with remote control. Turn ignition switch to position I. Wait approximately 10 seconds. Ensure clock LED illuminates.
    NOTE: LED illuminates for approximately 5 seconds.
    Switch ignition OFF and remove key, while LED illuminated. Programming mode activated for approximately 20 seconds (LED illuminated). Proceed as follows: Point key at receiver (located near interior lamp). Press and hold unlock button Fig. 1 [1]. After approximately 1 second key LED will flash once [3]. Press lock button 3 times Fig. 1 [2]. Release unlock button Fig. 1 [1]. Continue to point key at receiver until LEDs in clock and key have flashed 5 times. Ensure LED remains illuminated. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode and extinguish clock LED: Switch ignition ON and OFF. Wait approximately 20 seconds.
    NOTE: A maximum of 4 keys can be programmed. Fig. 1
    Radio frequency remote control
    System operation
    Switch ignition ON. Ensure clock LED illuminates for 3-5 seconds.


    Pressing tailgate release button twice within 3 seconds unlocks the tailgate - if fitted. Pressing key lock button once activates central locking and alarm. Pressing key lock button twice within 3 seconds activates double locking system. Interior lamp illuminates when disarming system.
    Programming
    When
    Key added or replaced. System malfunction.
    How
    Obtain all keys fitted with remote control. Fasten seat belts and close all doors. From position I, turn ignition switch as follows: To position II. To position I. To position II. To position I. To position II. To position I. Programming mode activated for approximately 20 seconds. LED or fog lamps ON warning lamp illuminates (some models) or the system will emit an acoustic signal to indicate start of programming mode. Proceed as follows: Type 1: Press and hold unlock button Fig. 1 [1]. Type 2: Press unlock button Fig. 2 [2]. Ensure clock LED or fog lamps ON warning lamp flashes (some models) or wait for acoustic signal (indicates correct programming). Wait 2 seconds. Repeat above procedure within 20 seconds to program remaining keys. To exit programming mode: Switch ignition ON. Wait 20 seconds.
    NOTE: A maximum of 4 keys can be programmed.

    Aug 25, 2010 | Ford Focus Cars & Trucks

    1 Answer

    How to reset the clock on dash


    I'm thinking that your talking about the VIC is the Vehicle Information Center... Its the display unit between the radio & the ashtray.

    You have to hold the "set" button while the time/date is displayed. Use the set button to change each section, then select to cycle through.

    Hope helps with this.

    Feb 04, 2010 | 1993 Jeep Grand Cherokee

    1 Answer

    How to reset service alarm VW Jetta 4 2000 model


    Hold the odometer button down and turn the ignition on while holding the odometer botton down. Turn the clock button to the right and relese all the buttons this should help to reset the alarm

    Jan 24, 2010 | 2000 Volkswagen Jetta TDI

    1 Answer

    05' freestyle has trouble code po611


    Try the following:

    Note the radio anti-theft code & station settings;
    BE SURE YOU KNOW HOW TO RESET THE ALARM;
    Be willing to reset the clock;
    clear the MIL code, then:
    remove the negative battery cable for one minute during which time, to clear any capacitor stored elctricity, then re-attach the battery cable and reset the alarm, radio settings and clock.

    If that does not solve the problem, replace the fuel injector control module.

    Jul 02, 2009 | 2005 Ford Freestyle

    1 Answer

    Reset service date on 2006 passat


    press your mileage reset button then turn key on then off,then repeat,2nd time keep mileage reset button pressed(keep pressed all the time basically)while holding mileage reset left turn your didgital clock then your service light should be off! ive done it on my 05 plate passat.

    Mar 11, 2009 | 2006 Volkswagen Passat

    3 Answers

    Focus remote key fob not working


    this info would cost you £30.+ at ford Radio Frequency Programming Instructions:
    • Insert the ignition key and turn from position II (Ignition) to position 0 (All off) and back four times within three seconds.
    • Remove the ignition key. The locking control system is now in "learn mode" for the next 20 seconds and the red warning system LED (By the clock) stays on continuously to indicate this.
    • During the 20 seconds press one of the transmitter buttons. The remotes signal and code number is learned by the locking module and is indicated by flashing the warning system LED.
    • Wait until learn mode times out (20 seconds) or switch the ignition back to ON.nfrared Programming Instructions:
    • Put your key into the ignition and turn to position 1 (Radio). After approximately 10 seconds the red alarm control LED (next to the clock) should illuminate. As soon as it comes on remove the key from the ignition - the LED should remain lit.
    • Point the remote's "eye" at one of the front door sensors and press the rear button until the light on the transmitter illuminates (Keep the button pressed)
    • With the rear button held in press the front button 4 times then release both at the same time. The control lights in both clock and fob will flash 4 times to indicate programming complete.
    • Turn the ignition back on to exit programming mode

    Nov 28, 2008 | 2000 Ford Focus

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    642 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    yadayada
    yadayada

    Level 3 Expert

    75822 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22156 Answers

    Randy Ohler

    Level 3 Expert

    14585 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...