Question about 2005 Daewoo Kalos

Open Question

MIL i have problem with mil or engie chick alarm i wat to kow how to chick and fix it thak yoy

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an 04 Alero. I just changed my battery and now my service vehicle soon light came on. I went to AutoZone and they said their scanner didn't read any codes. What should I do?


Do you know how to do electrical testing ? Have a volt meter ?
Malfunction Indicator Lamp (MIL) Always On
Battery positive voltage is supplied directly to the malfunction indicator lamp (MIL). The powertrain control module (PCM) turns the MIL ON by grounding the MIL control circuit.
This step determines if the condition is with the MIL control circuit or the PCM.
Did you perform the Diagnostic System Check-Engine Controls?
YES - Go to Step 2
NO - Go to Diagnostic System Check - Engine Controls

2
  1. Turn OFF the ignition.
  2. Disconnect the PCM.
  3. Turn ON the ignition, with the engine OFF.
  4. Observe the MIL.
Is the MIL illuminated?
YES - Go to Step 3
NO - Go to Step 5

3

  1. Remove the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console.
  2. Test the MIL control circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
YES - Go to Step 6
NO - Go to Step 4

4

Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console.
Did you complete the replacement?
Go to Step 6
--

5

Replace the PCM. Refer to Powertrain Control Module Replacement .
Did you complete the replacement?
Go to Step 6
--

6

  1. Turn the ignition OFF for 30 seconds.
  2. Start the engine.
Does the vehicle operate correctly without any MIL illumination, and without any stored DTCs?
System OK
Go to Diagnostic System Check - Engine Controls

Mar 16, 2016 | Cars & Trucks

1 Answer

Service engine soon light is staying on and computer is not showing a code


How does the vehicle run ?
Malfunction Indicator Lamp (MIL) Always On
Circuit Description
Ignition voltage is supplied to the malfunction indicator lamp (MIL). The powertrain control module (PCM) turns the MIL ON by grounding the MIL control circuit.
MIL Operation
The MIL is located on the instrument panel (IPC).
MIL Function ?€¢
The MIL informs the driver that a malfunction has occurred and the vehicle should be taken in for service as soon as possible.


?€¢
The MIL illuminates during a bulb test and a system test.


?€¢
A DTC will be stored if a MIL is requested by the diagnostic.


You could have a bad instrument cluster ! Here is part of diagnostic flow chart for your vehicle !

1

Did you perform the Diagnostic System Check-Engine Controls?
Go to Step 2
Go to Diagnostic System Check - Engine Controls

2

  1. Turn OFF the ignition.
  2. Disconnect the PCM.
  3. Turn ON the ignition, with the engine OFF.
  4. Observe the MIL.
Is the MIL illuminated?
Go to Step 3
Go to Step 5

3

  1. Remove the instrument panel cluster (IPC). Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console.
  2. Test the MIL control circuit for a short to ground. Refer to Circuit Testing and Wiring Repairs in Wiring Systems.
Did you find and correct the condition?
Go to Step 6
Go to Step 4

4

Replace the IPC. Refer to Instrument Cluster Replacement in Instrument Panel, Gages, and Console.
Did you complete the replacement?
Go to Step 6

5

Replace the PCM. Refer to Powertrain Control Module Replacement .
Did you complete the replacement?
Go to Step 6

Jul 09, 2015 | 2004 Pontiac Aztek

2 Answers

My OBD will not come on to do smog for 2000 grand prix super charge V6


you need to check the bulb in the dash see if its good check for power at the plug for the obd

Apr 21, 2015 | 2000 Pontiac Grand Prix

3 Answers

Why does check engine light blink when I accelerate?


Hi Ced ,
The malfunction indicator lamp (MIL) is located in the instrument panel cluster. The MIL will display as either SERVICE ENGINE SOON or one of the following symbols when commanded ON:
Check engine ! The MIL indicates that an emissions related fault has occurred and vehicle service is required.
The following is a list of the modes of operation for the MIL:
?€¢
The MIL illuminates when the ignition is turned ON, with the engine OFF. This is a bulb test to ensure the MIL is able to illuminate.


?€¢
The MIL turns OFF after the engine is started if a diagnostic fault is not present.


?€¢
The MIL remains illuminated after the engine is started if the control module detects a fault. A diagnostic trouble code (DTC) is stored any time the control module illuminates the MIL due to an emissions related fault. The MIL turns OFF after three consecutive ignition cycles in which a Test Passed has been reported for the diagnostic test that originally caused the MIL to illuminate.


?€¢
The MIL flashes if the control module detects a misfire condition which could damage the catalytic converter.


?€¢
When the MIL is illuminated and the engine stalls, the MIL will remain illuminated as long as the ignition is ON.


?€¢
When the MIL is not illuminated and the engine stalls, the MIL will not illuminate until the ignition is cycled OFF and then ON.

Trip

Mar 13, 2015 | 2003 Chevrolet Impala

1 Answer

What does mil cmd fail mean?


MIL is your malfunction indicator lamp, (check engine light)

CMD is the computer interface port, or OBDII port indicating a malfunction communicating with your cars computer

check all the fuses, primarily any marked pcm and retest your vehicle
note: your check engine or MIL has to be on in KOEO state (key on engine off), if the bulb is burned out everything will still work and the OBDII test computer will show MIL status ON, and if you don't have a computer to tell you that, you must get that light to light in the koeo state.

Aug 25, 2014 | Saturn Ion Cars & Trucks

1 Answer

I have a sign on the dashboard that I dnt know what the symbol is


see this chart troubleshooting and fix it.
God bless you
Check Engine or
Malfunction indicator light (MIL)
The Check Engine or Service Engine Soon light or an icon resembling the engine is called, in technical terms, the Malfunction Indicator Light or MIL. The MIL light comes on when your vehicle's computer detects a fault that can affect your vehicle's fuel economy and emissions. There is no button to reset the Check Engine light, but if the fault that caused it doesn't happen again, the light will turn off by itself. If the MIL light stays on, have the problem checked out, because in some cases, the problem could get worse if not repaired in time. Think of the Check Engine light as an early warning sign. To check why your MIL light came on, your dealer or mechanic will have to diagnose your car with a special scan tool.

Sep 30, 2013 | Cars & Trucks

2 Answers

My car has a code p1661 that makes it fail inspection what is that code and how to fix it


P1661 - MIL Control Circuit

It may be a fuse or loose wire....MIL stands for Malfunction indicator lamp

The shop who failed it should be able to fix any issue with it as well.

If this answer helped please vote for it!

May 10, 2011 | 1996 Chevrolet Caprice

1 Answer

This is an add on from a previous question... 2000 Kia Sportage with 93171K on it. The check engine light is NOT on. It does put out two codes on the OBDII reader. P0443 and P1693. I had been told by the...


Trouble Code: P1693 (2.0L L4 VIN 3 Auto)
MIL CIRCUIT MALFUNCTION Print this code dataprint_icon_codes.gif Number of Trips to Set Code: 2
OBD II Monitor Type: CCM Details
Indicators: MIL Details
Trouble Code Conditions:
KEY ON, AND THE PCM DETECTED AN UNEXPECTED VOLTAGE CONDITION ON THE TCM TO MIL CONTROL CIRCUIT DURING THE CCM TEST.
POSSIBLE CAUSES:
  • MIL CONTROL CIRCUIT IS OPEN
  • MIL CONTROL CIRCUIT IS SHORTED TO GROUND
  • MIL CONTROL CIRCUIT IS SHORTED TO SYSTEM POWER (B+)
  • MIL "BULB" IS OPEN OR MISSING
  • PCM HAS FAILED

Possible Causes: (n/a)
2000 Kia Sportage - G 2.0 DOHC - POWERTRAIN - P1693 Malfunction Indicator Lamp (MIL) Control Circuit

May 12, 2010 | 2000 Kia Sportage

2 Answers

What does code 1-p0650 mean?


P0650 Malfunction Indicator Lamp (MIL) Control Circuit Malfunction

Malfunction Indicator Lamp (MIL) is located on the instrument panel. When the ignition switch is turned ON without engine running, MIL will light up. This is a bulb check. When the engine is started, MIL should go off. If MIL remains on, the on board diagnostic system has detected an engine system malfunction.

Possible Causes:
  • Harness or connectors (MIL circuit is open or shorted.)
  • MIL bulb may be faulty
  • May 10, 2009 | Hyundai Accent Cars & Trucks

    Not finding what you are looking for?
    2005 Daewoo Kalos Logo

    Related Topics:

    22 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Daewoo Experts

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8582 Answers

    Are you a Daewoo Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...