Question about 1993 Nissan Pickup

Open Question

Engin computer no fire want start

Posted by Anonymous on


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Just did motor swap on 95 f150 pulled 5.8 efi and put in another 5.8 efi haven't hooked up any vacuum lines get no fire?

No, but the computer does. The PCM was programmed for the original engine. If the parameters of the engine and the software in the computer don't match the engine won't start. The PCM may need to be reflashed..needs a professional or you can fry a PCM, and they are not cheap! Yes even 95 are flashed with firmware.

Sep 19, 2017 | Cars & Trucks

1 Answer

Car swings but no fire on plugs ?

Car swings ? It's cranks ! When you turn the key to the start position the engine cranks or does nothing ! No fire on plugs ? No spark ! You want answers to your questions ,get the proper terminology ! You have a crank - no - start condition ! Check crankshaft position sensor , ignition module , PCM - engine computer , coils etc....

Apr 05, 2016 | Cars & Trucks

1 Answer

Can the camshaft position sensor be a problem to start the car

Nope, it will make it crank more before starting, but the cam sensor just tells the computer what stroke the engine is on, the crank sensor is what the computer fires off of. You need to figure out what your car does not have. If it has no spark look to the coils and see if they are getting the signal to fire the plugs. If so, you probably need coils, if not look to the crank sensor. see if you have voltage where you need it. If you have fire check for fuel pressure, if you have fuel pressure and fire make sure the injectors are firing. If it seems you have everything make sure the engine is in time.

Feb 25, 2016 | 2004 Mitsubishi Eclipse GTS

1 Answer

Outlander2004 start but wont fire up

You mean it cranks but won't start ?
If the check engine light is not on when you turn the key on, the engine computer does not have power from a fuse, or the computer has failed.

Aug 03, 2014 | 2004 Mitsubishi Outlander

1 Answer

Freelander will not start

if you replace the circuits with replacements, you should get a rev

Feb 11, 2013 | 2002 Land Rover Freelander

1 Answer

Got fire problems

If you are saying the engine will not start and you have no spark to the plugs, is the coil getting voltage and a ground pulse from the computer ?

Feb 01, 2013 | 1997 Dodge Intrepid

1 Answer

Im not getting any fire to start the engine will the coil packs stop this from

Who changed what & why?

The PCM?

What was the original problem?

What codes going back a couple months?

Nov 25, 2012 | 2001 Ford Expedition

1 Answer

Car turns over well fires but wont run

you need to have the engine coolant switch checked,since the computer relies solely on sensors,the ect tells the computer how cold or hot it is so the computer will make it a rich or lean mixture to start the engine,if it tells the computer that it is 75 degrees the computer will lean the mixture like starting a car in the winter without a choke.

Jan 08, 2010 | 1996 Dodge Stratus

2 Answers

Only one injector is firing

There is a sensor on the camshaft that send the signal to the sparks plugs and to the injectors in order to have spark and fuel in the right time. Check first this one. Is still dont have the right fuel on time, check your computer. If not the computer, not the sensor, then check your engine timing.

Aug 14, 2009 | 1996 Dodge Neon

3 Answers

Car won't fire when i turn it over.

car want fire 95 dodge adventure

Apr 04, 2009 | 1992 Mitsubishi Galant

Not finding what you are looking for?
1993 Nissan Pickup Logo

Related Topics:

12 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts


Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides