Question about 2005 Nissan Sentra

1 Answer

Same squeak What's weird is that unlike most other peoples squeak mine stops when i accelerate. belts look a little dry and pulley a little rusty. Will WD-40 work or do i need to replace the belts or pulley.

Posted by on

  • Anonymous Mar 13, 2014

    The engine squeaks, RV dealership (lazy days in sniffer fl) has replaced alt replaced pulleys replaced belts replace water pump adjusted pulleys.Dealer also removed all nappa parts that they used and replaced them with workhorse parts..squeak stops for a short time but returns

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Belt is probably just loose. Loosen the bolt right under the idler pulley (hard to see from the top of the car), then adjust the tension tighter. This fixed my problem which was the same as yours, squeaks at idle, especially if the AC is on, but as the RPM's rose it went away.

Posted on Jul 01, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Squeak near the serpentine belt


try a new belt they dry out after a while

Dec 01, 2013 | 2001 Buick Century

3 Answers

How do you tighten AC fan belt


i have 96nissan pathfinder and belt squeaking when i start the engine and stop and start squeaking when iam driving and stop and come back it a new belt

Jun 29, 2012 | 1996 Nissan Pathfinder

1 Answer

Jeep Grand Cherokee with new belt and still squeaks.


The pulley you describe sounds like the idle pulley and it should be straight and if you remove the belt and turn the pulley it should roll free and not bind. In short I would change the pulley as it has a bad bearing in it.

May 23, 2017 | 1996 Jeep Grand Cherokee

2 Answers

Squeaking while driving


jack up each wheel and turn them see if noise is comeing from wheel moveing or could be in drive train or worn out brakes squelers going off

Dec 12, 2011 | 2004 Kia Sedona

3 Answers

I replaced the serpentine belt on my 2002 accura rsx type s it sqeaks and seems loose is there any way to tighten it....tks


The tentioner should keep the belt at the right tention. Are you sure its the belt? I had some squeaking in my 05' RSX and replaced the Tentioner Pulley and the squeaking went away. Maybe this could be the same case. Hope this helps.

May 10, 2010 | 2003 Acura RSX

1 Answer

My 1998 Ford Explorer Sport S-belt makes a continuous squeaking noise that gets worse with acceleration. The alternator and the belt are both working, the belt just squeaks horribly. I've put silicon on...


it is likely one of the pullies failing. the most likely one is the tensioner pulley. only way to fix that is to replace it. also examine the front of your water pump. if there is any fluid "weeping" from the casting hole(s) at the front that would likely be your culprit

Feb 21, 2010 | 1998 Ford Explorer

1 Answer

I am experiencing a squeaking noise from infront near the fan belt area. when i accelerate,it gets louder. I discovered that the power steering pump is leaking ,so i topped up the reservoir and it stopped...


i have a similar problem. a squeaking noise, sounds when i start the engine, and when i stop the engine. at times it comes when the engine is running and idle, and it lasts some time like a high pitched whistle. Ive had several mechanics look at it, and it seem to be one of the smaller pulleys that the belts run around. in the 2002 model (petrol) of the crv the belts are not the cam belts, becuase this model has a cam chain (much more robust!). so they all said its nothing to worry about. you can try having your pulley replaced.

Jan 18, 2010 | 2002 Honda CR-V

Not finding what you are looking for?
2005 Nissan Sentra Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76070 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...