Question about 1994 Chevrolet Caprice

1 Answer

V8 vortec motor

New performance fuel pump new fuel filter new fuel regulator no fuel getting to fuel filter but bleeded the valve in it bubbled out a little gas pressure put gas inside intake started up and cut off

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

  • Expert
  • 244 Answers

When you first try getting fuel going. you may have to turn the key on and off a few times to build up pressure. if you can hear the pump working it will change when it builds up pressure. if its not then I would say you have a line leaking. check all your connections before you have a fire

Posted on Jan 23, 2015

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

60 horse Work Master New Holland wont start blead lines but looses fuel to filter seems like hand pump dont work will run if you spray ether then dies when you stop spraying it. Can someone help


Earl You have to be able to bleed all of the air out of the fuel filter and lines for your engine to run. If the fuel is leaking back to the tank there is a problem with the valves in the hand primer pump.You might have to replace the pump. Remove or loosen the bleed screw on the top of the filter and pump out all of the air so there is no more bubbles then loosen the fuel lines at the injectors and turn the engine over with the starter to bleed the lines. Only crank over with the starter for 30 seconds per try and give the starter time to cool down

Oct 31, 2015 | Cars & Trucks

2 Answers

Changed fuel pump, fuel filter, relay, new plugs, distributor cap & rotor. Still not getting enough fuel to start.


9 times out of ten I have fixed this exact same problem with a fuel pressure regulator. the other times it was the bcm. if it is the bcm you can get it from local parts store then get it flashed by dealer.

Jul 11, 2015 | Cars & Trucks

1 Answer

Put peformance pump new fuel filter and fuel regulator on still no gas pumping into filter you can hear pump come on pour gas inside intake start up and shuts off


I think you have fuel pump defect
You can hear the pump but is not pumping fuel
The electrical fuel pump motor works but not the pump side
hope it helps

Mar 21, 2014 | 1994 Chevrolet Caprice

1 Answer

Gmc suburban 1996 V8 vortec engine,delayed starting after 1hr. standby.it took 15 seconds of continous starting before engine run.once the engine run i put it off and start it again,it took only 1 second....


Check for fuel presser bleed down, does the fuel presser hold after you shut it off? or does it fall off? if so check for bad pulsar valve or bad injector ect.

Oct 28, 2011 | Cars & Trucks

2 Answers

My 94 GMC Jimmy 4x4 vortec, is hard to start, cuts off when i make stops, have to put it in neutral when i am at lights and still have to give it gas then. already changed the distributor cap and rotor...


I recently had similar symptoms from my Kia Rio, hard to start, bad idle in gear, etc.
Ended up being the idle air control valve, you can try cleaning yours with carb cleaner and see if there's any difference.
A clogged fuel filter can produce the same symptoms too, that might be the easiest thing to start with, then it's just a process of elimination from there.

Sep 02, 2011 | 1994 GMC Jimmy

1 Answer

96 gmc vortec will not start


I AM LOOKING AT TIMING ISSUES OR INTAKE MANIFOLD LEAK.OR EGR VALVE STUCK OPEN.

Dec 30, 2009 | 1996 GMC Sierra

4 Answers

95 Blazer Vortec starting problem.


Hello;
First you need to have your fuel system tested. It sounds as though the relay and pump have gone out. When you turn the ignition to on the pump should energize for 2 seconds and stop. The pump will deliver fuel after startup. Poor performing pump equals poor performing vehicle. With the vehicle not staying running when it did start, I would check the fuel pressure and then replace the pump. You can check the fuel pressure regulator by pulling off the vacuum line and see if you have fuel in the line. If you do the regulator is shot. The fuel pump relay also needs to be checked for operation especially if the fuel pump is not working. Also check your rollover valve to be sure it has not tripped.
Thanks;
Rich
RPM Norhtwest

Jan 28, 2009 | 2004 Chevrolet TrailBlazer

1 Answer

Priming fuel system on a 8.1L diesel engine 2001chev 1 ton dual


Well, one problem is, if its an 8.1, its not a diesel. The 8.1, or Vortec 8100, is a gas engine. The DuraMax is a 6.6 engine. There is usually not a priming system on a gas engine, because the fuel pumps will usually get it through the smaller filters used quick enough you dont need them. However, if it is a DuraMax engine, then right on top of the fitting where you mount your diesel filter, there is a primer pump and an air bleed valve. What you do is, open up that air bleed valve ( its a little black plastic octagon shaped thing on the top of the filter mount) then you pump the primer (the silver button looking thing) until you get diesel squiting out the air vent without too many air bubbles or gurgles.

Jan 17, 2009 | 2001 Chevrolet Silverado 2500HD

Not finding what you are looking for?
Cars & Trucks Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...