Question about 2007 GMC Sierra 1500

Open Question

Driver window won't operate

Driver window stopped working can still control other three windows from driver side. passenger can control there window. rear operators wont work. my cruse control stopped at the same time. tried changing motor in driver door and tried changing controls with no change.

Posted by on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 4 Answers

SOURCE: Main control module on driver's side does not

Check fuse& circuit breaker.

Posted on May 30, 2010

  • 1986 Answers

SOURCE: drivers side window control cluster

The control may have gone bad... You'll need to remove screws that are by the door handle, arm rest, under door and side of door and then gently pull back on the panel as there will also be retaining clips attached and you don't want to break them. Then you can disconnect the controls and test them

Posted on Aug 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Driver's side power window working, but all three passenger windows died at same time. How to assess issue? (i.e., fuses to check, etc.)


Check the window lock out. You may have pushed that on accident. It locks the passenger and rear windows so people dont use them when the driver wants to control window operation.. Usually for annoying kids :) The window lock out usually has a pic of a window with an "X" or a pic of a window with the word "lock"

If that is not it, It sounds like the controls went bad. This happens from time to time. When liquids get onto the window controls its common that some go out and or they all go out. I would put my best guess on the window lock out.
Only true and accurate way to check is manually see if power is exiting the window controller to the rear windows and or passenger window... you would need a Volt meter to watch voltage.

Jan 10, 2015 | Cars & Trucks

2 Answers

Mazda 6 passenger window won't go up!!!


It sounds like it could be the window solenoid, or the window motor. It's unlikely the switches on both doors are bad. Check the solenoids and motors...

Oct 16, 2012 | Mazda Cars & Trucks

1 Answer

2001 ford mustang passenger window won't go operate from driverside


If it works with the passenger side switch but not the drivers switch, I would look at the drivers switch for the problem.

Jul 18, 2012 | 2001 Ford Mustang

1 Answer

2004 Toyota tundra passenger power window switch not operational


Try a passenger side door switch or a new complete master switch on drivers door. Alaways check fuses also.

Jun 16, 2012 | 2004 Toyota Tundra Cab

1 Answer

Hi,i have lexus rx350 year 2007.the power window control on the driver side doesn't work for the other 3 windows,but all 3 windows can power by passenger side and in the back side. thankyou


Hello
I am a little confused about what you are saying here, but I think you are saying that no windows work from the drivers door master window switch except the drivers door window, and that the switchs at each of the three other doors operate the windows ok? Is this correct?

Apr 24, 2011 | Lexus RX 350 Cars & Trucks

4 Answers

Window problem


Might want to check the doors with the problem windows for a broken wire from the door to the door jam.

The window lock switch is a single circuit to all the other windows, so if there was a problem with it, none of the window controls would work ( but the driver's side would still operate them ).

The other place to check for a broken wire is the driver's side door to a-pillar harness. The circuits for the other windows run through the driver's side switch. Could be a wire in the driver's side door harness.

The other item could be the driver's side switch, the contacts will get carbon built up on them, and the windows will not operate anymore.
This is what mine looked like when the driver's side window stopped working ( lower left hand corner of the picture is the driver's side window switch, note the carbon build up on the contacts )
ccfb7fb.jpg

I would start with checking for broken wires, by metering the window switch for power.

The back passenger's window switch should be getting power & ground on the white w/ yellow stripe wire and the tan w/ light blue stripe wire.
in the "at rest" position on the driver's side switch, these are supplying ground to the power window, and power is being applied to the other side of the motor ( depending on direction of travel ).
792a56e.jpg

Apr 05, 2010 | 2004 Ford F150

1 Answer

2000 Towncar power window problem


the driver side window switch is the problem.

May 04, 2009 | 2000 Lincoln Town Car

1 Answer

2003 toyota corolla sedan - power window stuck


u have to open the door pad for inspection of power winow motor and linkages

Apr 17, 2009 | 2003 Toyota Corolla

Not finding what you are looking for?
2007 GMC Sierra 1500 Logo

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...