Question about 1989 Chevrolet Corsica

Open Question

The button came out of the emergency arm.

While applying the emergency brake the button popped out of the brake handle.

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1810 Answers

SOURCE: The emergency brake will not release when I pull.

just a little rusty is it ???\
\
theres a product called release all spray it down the parking break cable ends in the parking break housing
also if need to work asap put truck in reverse and slowely work it back and forth rock the truck

or if all else fails remove tires and wach drums with a hammer untill they release then once open pull the cables with vice grips and have friend pull hand break
so you get a back and forth motion untill cable free remem ber there are 2 rear drums on every truck
so do both cables

Posted on Jan 10, 2010

Testimonial: "Rocking back and forth was the immediate solution. Getting it serviced, of course, is the long term solution. Thanks for the help."

Ad
  • 340 Answers

SOURCE: can't get the emergency brake off. where's the

next to the hood latch assembly on the drivers side neer the airvent

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

When I step on the brake I don't hear no clicking noise what is wrong?


What kind of clicking noise do you expect to hear? Applying the main brakes is usually a silent activity.
If you are referring to the emergency brake, it is the clicking of the ratchet when applying the emergency brake. The clicking is the sound of spring loaded metal teeth bouncing along a cog wheel. The action is similar to the teeth on a hand winch that does not allow backward turning. If when applying the emergency brake the sound is not heard then the spring may be broken or dislodged.
Does the brake engage? Does the handle stay pulled until the brake is released? If not then the locking of the brake is not happening.

Oct 10, 2016 | Cars & Trucks

1 Answer

Parking brake will not release when I pull the handle. There is resistance in the handle


check under the dash to see if your signal relay is in place. they have a tendency to pop out and rest on the upper part of your braking arm and since it is lose, it will roll with the arm. if that is the case, pop it back in and use a plastic tie to hold it in place. good luck

Feb 06, 2014 | 2003 Chevrolet Blazer

1 Answer

My shift lever will not move from park even afetr appling the brakes


There is a little black cap beside the shifter, you can't miss it. Pop the cap off with your key, and inside there will be a button, push that button down and hold it there, with the brakes applied. Now the shifter will work.

Dec 08, 2011 | 2004 Volkswagen Jetta

1 Answer

Emergency brake handle on 2001 chevy colt won't hold, was replaced by RK DEALER and also the gas leaks, now the engine check light comes on


Your brake handle has two sets of gears that will lock against eachother. The button in the front of your handle acts as a release for the arm sode of those gears. Sounds like the button is jammed. Remove the cover fo rbetter access. Slide the cover off the arm Shoot some WD-40 inside the shaft where the button sits and push it in. If it doesn't push in, then it's probably jammed in. Maybe something is wedged inside. The check engine light is probably because of the gas leak. The computer senses the low pressure and prompts the caution. On a second notion, if you had the brake pads replaced on the rear wheels, it's possible that the cable needs to be re-adjusted for the new pads. The e-brake uses the rear pads for action. Good luck!

Oct 14, 2011 | 2006 Chevrolet Cobalt

1 Answer

Manuel Parking brake release the parking brake is stuck and we are trying to get it released how do you do it?


Foot Park Brake...
There should be a release lever(not the main release) up at the top of the park brake arm, under the dash. Its small, 1.5 to 2 inches long. I recommend using a screwdriver to "flip It", keeping your fingers and hand and your face for that matter, away from the arm. It is spring loaded and will release/move very fast. Also it could just be that someone unitentionally stepped on the pedal really hard, and it will take the same amount of foot pressure to release it while pulling on the release handle.

Hand Park Brake...
Again the same principle applies. It will take the same pressure applied to release it. Push in ******* the release while pulling up ******* the handle. This one can also be released by using a screwdriver to pop the the locking tab.

Aug 18, 2011 | 2003 Buick LeSabre

1 Answer

How do you release emergency brake 94 dodge dakota after used? Brakes went out used emergency. Now i can't release them.


either there is a release handle or you may have to press the pedal down further and it should auto-release. Are you up north? salt? rusty cars? if the pedal is UP but the brakes are still applied, then the cables are rusted /siezed and you will need new cables and rear brake service to have brakes again.

Oct 06, 2009 | 1994 Dodge Dakota Club Cab

1 Answer

1993 PONTIAC GRAND PRIX I NEED TO KNOW HOW TO RELEASE MY EMERGENCY BRAKE?


look for a lever on the right side, if the brake is applied with a pedal on the left....if its a hand brake push the button on the handle

Apr 19, 2009 | 2000 Pontiac Grand Prix

1 Answer

2000 pontiac emergency brake stuck. how do i


Are you in a Northern Climate were road salt is used during winter? The emergency brake problems I have encountered tend to be due to rust and corrosion accumulating on the wires and metal pivot points that operate the brake via the emergency handle on the center console.

Get underneath the car (chock the wheels---ALL FOUR! with bricks or large chunks of wood---be sure the car is in PARK!) and find the wire that connects to the handle of the brake---follow it to the rear brakes, and you will see a split where it goes to the L and R sides via a sliding clasp of steel that looks like a C, and has wires running over the top, and to each rear brake.

At this point, grab the wire on one side of it and PULL HARD several times, slack between pulls. Do this for each side---that should release the assembly, and the shoes from holding the drum.

After you have done this, lubricate the pivot points and the wire connection to the brake handle with TRI-FLOW (NOT WD-40)or another teflon based lubricant.

Mar 27, 2009 | 2000 Pontiac Grand Prix

1 Answer

Brakes


drive the car apply slowly the emergency brake you gonna brake with the rear only if you fell the pulse its our rear drum that warp be carefull when applying the emergency try to hold the release handle at the same time if no pulse change our front rotor there nothing else that can pulse when you brake hope it help fixya our post thanks pierre

Jul 13, 2008 | 2000 Buick LeSabre

2 Answers

1997 Saturn SL-2 emergency brake handle BUTTON fell out / off. Emergency brake functional, but can't leave car out of gear (manual)when vehicle is unattended. Live in flat Florida so no huge deal.


Well my 97 sl2's button also flew out of the emergency brake handle. I got frustrated when i saw how much they wanted for the parts to get it fixed. But the solution was as close as my tool box. I found a forgotten tube of 5 ton epoxy resin. And since i didn't feel like spending $100,00 i took the cover off the emergency brake put epoxy gel inside the broken button put the spring on and put the plastic piece in place put on and held the button down for 10 minutes with my bare hands until set to usable strength and now it works perfectly.

Jul 01, 2008 | 1997 Saturn SL

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

25 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...