Question about Cars & Trucks
I would suspect the socket is defective. Also please stop smoking, we can breath a little easier.
Posted on Mar 20, 2014
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
The problem is the turn signal/headlight/hazard switch assembly on the steering column which the brake light wiring runs through. The part is easy to change and cost about $50 at most parts stores
Posted on Sep 05, 2008
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
Posted on Dec 31, 2008
SOURCE: 97 CAMRY TAIL LIGHTS PROBLEM
You are right you do have a short,but it's easy to fix at the same time it is expensive. In your trunk area you will find a bulb out relay it can be either in the right corner or left corner panel in the trunk area,if not there if may be under the rear deck of the trunk(under the rear window inside the trunk) It might be yellow brown or green.One fron the junk yard will work just as good as a new one.If you are skillful you can open it and solder the burned circuit,but you have to know what you are doing.You also neet to find out if you had a bad bulb that shorted so you can rest knowing that what caused it to burn out in the frist place is fixed.
Posted on Jul 23, 2009
need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.
Posted on Jan 19, 2010
Tips for a great answer:
Dec 02, 2016 | 1992 Buick Roadmaster
Jun 02, 2013 | 2010 Ford Escape XLT
Feb 21, 2013 | 1986 Nissan Pickup 4WD 1986
May 19, 2012 | 2007 Chrysler Sebring Sedan
Nov 01, 2009 | 2003 Toyota Highlander
Apr 18, 2009 | 1999 Chevrolet Silverado 1500
Nov 28, 2008 | 2005 Volkswagen Jetta
23 people viewed this question
Usually answered in minutes!