Question about 2005 Ford Escape

1 Answer

I need to install a fuel pressure regulator on a 2005 Ford Escape

Posted by on

  • Martin VanDyk
    Martin VanDyk Mar 20, 2014

    Fuel pressure regulator? I went to my favourite Dord dealership and within the hour it was successfully dealt with. After the Escape had about 250,000km on it, I located a 2006 Nissan X-Trail with 88,000km. I thanked the teacher for "breaking in the car". It drives like new. And the engineer/mechanic reviews out shone the Escape reviews , especially 2013-2014. We miss the Escape, perhaps in 4-5 years I will return to Escape ownership. The car must have relatively low kilometres on it. 75,000 km or less.

  • Charlie Andrews
    Charlie Andrews Mar 21, 2014

    There is a whining as i accelerate. I took it to the garage who told me it would cost $300 to replace it. I found the part for under $100 and I'm trying to save the money on labor.

×

Ad

1 Answer

How do you know the fuel pressure regulator failed?

What test told you so?

I called a lincoln dealer, by me, for someone on fixya a
couple years ago & the parts dept told me, they only gave
out 3 in six years,so that is not a high failure item.

Only a couple screws to remove ,I believe
Could be screwed into the end of the fuel rail
Look at it & you know

Posted on Mar 20, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22219 Answers

SOURCE: ford focus fuel pressure

you are interferring with something you know nothing about,dont you have an annual vehicle inspection to check that vehicle conforms to whats on the paperwork,or are using this just for track .as a vehicle with this sort of modification with no cat on either is illegal to use on the road.the brakes cant cope with extra power the suspension ,the chassis in fact everything is not designed for this if you want a faster car buy a nice jag or a porsche evan consider ferrari or lamborgini

Posted on Nov 12, 2008

polarcycle
  • 1392 Answers

SOURCE: 2005 ford escape assembly diagram for the front axle

If they are sealed bearings, you will need a press to get them out. If they are bolt in, just remove the brake pads/rotors, then the axle nut, then the bolts holding the wheel bearing in. Install in reverse order.

Posted on Mar 07, 2009

  • 93 Answers

SOURCE: Need to replace headlight assembly on 2005 Ford Escape

ithere are 4 bolts that hold it in...the top 2 are obvious..the others are behind the bumper. the bumper must be removed to acces them...here are the manuals instructions..

n0037234.gif
Item Part Number Description 1 — Headlamp assembly bolts (3 required) 2 — Headlamp assembly nut 3 13008 Headlamp assembly 4 14290 Electrical connectors
Removal and Installation
NOTE: Make sure the headlamp switch and the ignition switch are in the OFF position.

  1. Remove the front bumper cover. For additional information, refer to Section 501-19.
  1. Remove the 3 headlamp assembly bolts.
    • To install, tighten to 5 Nm (44 lb-in).
  1. Remove the headlamp assembly nut and the headlamp assembly.
    • Disconnect the electrical connectors.
    • To install, tighten to 5 Nm (44 lb-in).
  1. To install, reverse the removal procedure.

Posted on Jun 10, 2009

gladys_neal
  • 334 Answers

SOURCE: 2005 ford escape 3.0l AWD XLT - DRIVESHAFT CARRIER

if there is some one in your area that balances driveshafts they can change just the bearing for you

Posted on Nov 10, 2009

  • 4 Answers

SOURCE: where is the fuel pressure

I'm trying to post 2 different schematics, one for the 3.0L and one for the 2.3L engine, the top picture is the 2.3 and labeled and the bottom picture is for the 3.0 and uses the same labels as the 2.3. Hope that works for you.026888e.gif



41734aa.gif

Posted on Oct 22, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the fuel regulator on a2006 ford expedition


    images for Where is the fuel regulator on a2006 ford ...


    More images for Where is the fuel regulator on a2006 ford expedition

    How to Remove Install Fuel Pressure Regulator - YouTube

    ? 5:47
    https://www.youtube.com/watch?v=rg7ftqJyQUg
    Oct 7, 2013 - Uploaded by MattHumanPizza
    A check of the fuel pressure regulator, as well as the removal and installation process is ... Yeah the regulators are sht on the 98/02 2.0 ford motor. .... Replacing a Fuel Pressure Regulator ona 2001 Chevy Silverado 1500 (5.3L) ... 2005 Ford explorer 4.0 V-6 engine Fuel Rail Pressure Sensor removal ...

Dec 15, 2015 | 2006 Ford Expedition

1 Answer

How to diagnose afaulty pressure regulator on the fuel rail of a 2005 ford escape


Check the pressure with a fuel pressure gauge connected to the test port on the regulator or on the fuel rail itself. There should be at least 30 psi on the rail with the engine running and the same without the engine running. If the pressure bleeds off when the engine is not running, the check valve in the regulator is leaking down which will make a first start in the morning difficult.

Sep 23, 2014 | Cars & Trucks

1 Answer

Where is the Map Sensor on 2005 Ford Escape 4Cyl ? How do you replace it


M.A.P. Sensor Operation: Measures intake manifold vacuum pressure to help control the air and fuel mixture and timing. Contains a pressure-sensitive element that connects to an electronic circuit, generating a signal that changes with pressure changes in the manifold.,all you do is unplug ,old one and remove the screws or small bolts and replace and plug in new one ,be sure to clear computer before running. if this helped please let me know .
Woody

Sep 10, 2014 | 2005 Ford Escape

2 Answers

I have a 2005 Ford Escape that gave a P0193 code, the car seems to not go when you put the pedal to the floor. Only has about 75000 miles


  • P0193 Fuel Rail Pressure Sensor Circuit High Input. This can be fixed by replacing the sensor. More than likely it has gone bad for some reason (it's hard to tell exactly what caused it).

  • Have a good one!

    Feb 21, 2011 | 2005 Ford Escape

    2 Answers

    Hello, I have A 2005 Ford Escape that threw a code P0193. Wondering What would be the most likely problem. has 119000 miles. thanks


    Two common things can cause this code. High fuel pressure or a bad fuel pressure sensor. The easiest thing you can do is replace the sensor. It is located on the fuel rail on the passenger side of the engine. It will have a vacuum hose and a connector plugged into it. The part is available from the dealer for about a $100. A basic set of tools and about 1/2 hour are all that is needed to replace.

    The fuel line will be under pressure so be aware that fuel will spray all over the place when you remove the sensor. There should be a test port near the sensor with a black plastic cap. If you remove the cap you will be able to push in the schrader valve and release the pressure. Again watch yourself and have some rags handy to catch the fuel spray that comes out of the test port.

    Nov 17, 2010 | 2005 Ford Escape

    1 Answer

    I have p0158,p0171,p0175,p1336,p2198,p2273-02,p0403 all showing


    Sounds like the fuel pump pressure may be set too low. When you have the throttle open the TPS (throttle position sensor) sets the spark and fuel for a given demand.

    When the demand is greater than the amount of pressure you have, the pressure drops and the engine is gas starved. The fuel pressure regulator is not responding fast enough but it is limited by the pressure your pump is making.

    You need to get the fuel pressure checked. If the pressure is okay then the regulator is sluggish.

    Jun 12, 2010 | 2003 Ford Escape

    1 Answer

    05 escape obd2 code po193 whats wrong?


    u have either excessive fuel pressure or a defective fuel pressure regulator or a defective pressure sensor in the fuel rail..

    Jan 26, 2010 | 2005 Ford Escape

    1 Answer

    Have a 2005 escape this morning it was cold. and


    Have your fuel pressure checked.And change the fuel filter.

    Nov 29, 2009 | 2005 Ford Escape

    1 Answer

    2005 FORD ESCAPE WILL CRANK NOT START


    Check to see if you have spark and fuel pressure. I would say to have it properly diagnosed at a shop because without the pressure tester and a diagnostic device if it isn't with the spark delivery or fuel supply then you could be spending a lot of time searching.

    Jul 20, 2009 | 2005 Ford Escape

    1 Answer

    2005 Ford Escape Rough Idle - engine code state lean fuel mixture


    I recommend getting a repair manual from an auto store for your vehicle. They run $15 to $20. It will tell you exactly how to do everything you asked and also give you the values that should be expected. Hope this helps.

    Feb 08, 2009 | 2005 Ford Escape

    Not finding what you are looking for?
    2005 Ford Escape Logo

    131 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Ford Experts

    yadayada
    yadayada

    Level 3 Expert

    76630 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22219 Answers

    fordexpert

    Level 3 Expert

    5537 Answers

    Are you a Ford Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...