Question about 2007 Saturn VUE FWD 4

1 Answer

Repeated leaking with new slave cylinders on saturn vue 2007

Vehicle had a leaking slave cylinder-was replaced by a shop with aftermarket parts + leaked again- they returned parts as defective-used another set of parts + leaked again ! Then went bought Dealer Slave replaced only the Slave-leaked again-we have it now + replaced all parts with new Dealer parts + leaks still !! ??

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Saturn Master
  • 75,066 Answers

The clutch hydrasulic fluid line needs to be replaced.

Posted on Mar 20, 2014

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

shadytree
  • 25 Answers

SOURCE: Slave Cylinder

If you do not see it on the outside of the transmission I bet it's in the bell housing.

Posted on Jul 28, 2009

  • 18 Answers

SOURCE: How to bleed a slave cylinder on a Saturn?

tyhe bleeder is down on the transmision

Posted on May 15, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is the slave cylinder on a 5 speed saturn vue 04 2.2 front wheel drive


Hi Nicolas,here's a repair guide from Autozone on replacing your Clutch slave cylinder,join their site and become a member like me then you can use all their repair guides for free. Repair Guides Clutch Slave actuator Cylinder AutoZone com

Jun 26, 2015 | Saturn Cars & Trucks

1 Answer

Clutch fluid leaking under engine 2002 Saturn Vue


Could be your clutch slave cylinder,here's how to replace.

Mar 01, 2013 | 2002 Saturn VUE

1 Answer

2002 saturn vue, manual shifting problems


You have a slave cylinder for this trans. Pump the clutch pedal 25 times with the engine OFF. Then start it and try shifting it into each gear while parked. If this make it work your slave cylinder needs to be replaced

May 15, 2010 | 2002 Saturn VUE

1 Answer

I pushed my clutch and it was spongy and didn't engage. It is just limp.


the slave cylinder is probably bad,it is part of the throw out bearing with is on the trans output shaft,you need to remove the trans to change it,,,,its a big job,,,,can not do this at home,take it to a shop,if the slave cylinder is bad it usually leaks out by the trans onto the ground,or you have a worn out clutch,either one needs the trans removed

May 07, 2010 | 2003 Saturn VUE

1 Answer

Slave Cylinder


If you do not see it on the outside of the transmission I bet it's in the bell housing.

Jul 28, 2009 | 2002 Saturn VUE

1 Answer

If the clutch slave cylinder on my 2005 Saturn Vue is internal to the transmission, how would the fluid have poured out onto my garage floor? I think the transmission dude might be pulling my leg to the...


No its internal meaning that its in the bell housing.The bell housing is bolted to the gearbox to hous the clutch befor being bolted to the engine.It has no seal on it.So when your slave cylinder leaks,The fluid drips from the bell housing.And the only way to get at it is to remove the gearbox.

Jul 17, 2009 | 2005 Saturn VUE

2 Answers

Bleeding my saturn vue clutch after slave install and having problem with it


first fill the clutch reservoir with brake fluid.get some body to help you.besure dont let clutch reservoir fluid get low during this procedure.get a clear vinyl tube.connect it to bleeder plug on slave cylinder.put the other end of vinyl tube in a container filled with half clean brake fluid.now get helper to open bleed screw on slave cylinder just a hair.now you pump clutch pedal 10 to 15 times.with out bringing pedal the full way up.do this until you see no air bubbles in vinyl tube.when all air is out.before tighten bleed screw make sure you keep slight pressure on clutch pedal to keep air from going back in line.when job complete clutch pedal fill firm check slave cylinder brake fluid level. check for leaks.you all set to go.

Jul 13, 2009 | Saturn Vue Cars & Trucks

1 Answer

Clutch fluid leaking from bottom of crankcase/bell housing


The slave cylinder will have to be replaced and air bled from the system to make this repair.
Good luck

Nov 24, 2008 | 2003 Saturn VUE

Not finding what you are looking for?
2007 Saturn VUE FWD 4 Logo

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...