Question about 2005 Toyota Highlander

Open Question

Toyota p0022 Code p0022

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keep getting code p0022


Camshaft position'A' timing over-retarded bank 2 not the sensor

Apr 14, 2015 | 2006 Ford Expedition

1 Answer

Ford f150 2007 engine code P0012 and P0022


They are camshaft codes. You can try replacing the camshaft sensor. Or you can take it to a service shop and let a pro take care of it for you.

Aug 19, 2014 | Cars & Trucks

2 Answers

P0022 for 2004 toyota sienna van


P0022 Toyota - Camshaft Position \'A\' Timing Over-Retarded Bank 2



























Possible causes




- Dirty Oil

- Faulty variable valve timing (VVT)

- Faulty oil control valve (OCV)

- Variable Valve Timing (VVT) harness is open or shorted

- Oil Control Valve (OCV) circuit is open or shorted

- Damaged Engine Control Module (ECM)




Tech notes



If the engine oil is clean and the VVT and OCV circuits are OK, replaced the VVT to resolve the problem.





When is the code detected?


After the ECM sends the target duty cycle signal to the OCV, the ECM monitors the OCV current to establish an actual duty cycle. The ECM determines the existence of a malfunction and sets the DTC when the actual duty cycle ratio varies from the target duty cycle ratio.


Possible symptoms


- Engine Light ON (or Service Engine Soon Warning Light)

- Lack/Loss of power

- Engine rough idle


P0022 Toyota Description


The Engine Control Module (ECM) controls the Oil Control Valve (OCV) to regulate the intake camshaft angle. As a result of the angle change, the engine timing is advance or retard. Optimizing engine timing will help the engine improve torque and fuel economy, and the exhaust emissions decrease under overall driving conditions. The Variable Valve Timing (VVT) system includes the Oil Control Valve (OCV) and VVT controller. The ECM detects the actual intake valve timing using signals from the camshaft and crankshaft position sensors, and performs feedback control.

----------






6c14c332-d1b6-45ff-a18f-572803b2f941.jpeg

Aug 14, 2014 | Cars & Trucks

1 Answer

P0022


crank sensor replacement

Mar 26, 2014 | 2010 Ford Expedition

1 Answer

Code P0022 came up on my 2006 experdition


You will probably have to change the camshaft timing senser on that bank k .

Mar 13, 2012 | 2006 Ford Expedition

2 Answers

2007 Ford F-250, 5.4 Engine-Missing, running very rough at idle-very low idle. Engine codes P0011, P0022, P0171, P0300, P0305, P0307, P0316, P2198.


Hello, There is an extended Warranty for "Cam Phasers". I want to say 7 Years and 90,000 Miles. But some of the repairs are on a case by case basis. Years 2004-2008 were affected.

I will tell you what your Codes mean.p0011 and p0022 are both for the Camshaft position sensors. One side is overadvanced and the other is retarded. Code p 0171 is an O2 sensor, Code 0300 is random misfiring, Codes p0305 and 0307 are the #5 and #7 cylinder misfires. Code p0316 is a general misfire when starting up, and finally the p2198 is a rich condition O2 sensor on bank2 sensor 1.

All of these make sense when the Cam on bank 1 is over advanced you will run lean and the Cam on bank 2 is retarded, you will run rich. The misfires are from incorrect timing and affected fuel mix.

There are "cheater tools" for this repair which will cut Labor costs in half. Check the Web for Mac tools, Snap-on, and so forth. The cheater works by pressing down on the internal chain tensioner to make slack in the timing chain. You take off the valve covers and unbolt the Cam (Phaser) gear and sneak it out through the valve cover opening. The CAM PHASERS cost $300 to $500 apiece.

A normal repair without the cheater involves removing the front of the motor up to the heads and still requires removing the valve covers.

I hope my solution is very helpful to you, at least you know why you are getting the Codes you are reading.

Jan 26, 2011 | Ford F-250 Cars & Trucks

1 Answer

Keep getting code p0018 and p0022. plus car is rough on idle. is it expensive to fix.


Hi, a P0018 definition is Crankshaft Position - Camshaft Position Correlation (Bank 2 Sensor A). A P0022 definition is "A" Camshaft Position - Timing Over-Retarded (Bank 2).

More info on the P0022 code @ http://www.obd-codes.com/p0022

As for the cost to fix, I'm not sure off-hand. A qualified technician should be able to diagnose that likely within 1-2 hours of shop time.

Jan 15, 2010 | 2006 Lincoln Zephyr

1 Answer

P0022 car shakes when idleing


P0022 - Intake position timing over retarded bank # 1

Could be timing chain on your 3.0L v-6 could have jump timing or you just have a bad cam sensor.

Jan 15, 2010 | 2006 Lincoln Zephyr

2 Answers

I have diagnostic codes of 22, 23, 24 for my 1995 Saturn Sl 1


well according to your codes that i looked up for you i think its safe to assume that your timing is off. i will paste the codes so you can see for your self. i hope this is what the codes actually look like.
P0022 "A" Camshaft Position - Timing Over-Retarded (Bank 2)

P0023 "B" Camshaft Position - Actuator Circuit (Bank 2) - See Trouble Code P0020

P0024 "B" Camshaft Position - Timing Over-Advanced or System Performance (Bank 2) - See Trouble Code P0021

P0025 "B" Camshaft Position - Timing Over-Retarded (Bank 2) - See Trouble Code P0022

Apr 29, 2009 | Saturn SL1 Cars & Trucks

Not finding what you are looking for?
2005 Toyota Highlander Logo

Related Topics:

55 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76682 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8531 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...