Question about 2008 Saturn Vue Hybrid

Open Question

Code p0017 replaced both selonoids int&ex idles bad, codes p0017 &p0016 are present

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007chevy,hhr started missing extremely bad , then overheated when I crank the engine no compression friend of my coded 016 and 017 ? jumped time or better yet probably broken chain ! Any ideas ?


DTC P0017: Crankshaft Position (CKP) - Exhaust Camshaft Position (CMP) Correlation
DTC P0016: Crankshaft Position (CKP) - Intake Camshaft Position (CMP) Correlation
Pull the valve cover off then turn engine by hand , socket on crank pulley an 1/2 breaker bar . Or you will be able to pull the chain up , if broken . Or even better yet pull the oil cap an spin engine , does the cam move .

Nov 07, 2016 | 2007 Chevrolet HHR

1 Answer

P0016 and P0017 check engine pop up after i run for 10 to 15 miles?


the common causes for code P0017 are as follows:
  • A faulty cam or crank sensor
  • The cam or crank circuit is open or shorted
  • The timing belt/chain is out of time
  • The cam or crank tone ring is slipped/broken
  • A problem in the VVT system P0016 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A) P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor) God Bless! Hope this helps you.

Mar 08, 2016 | Cars & Trucks

1 Answer

I have a 2007 Chrysler Sebring 2.4 with code P0017. Replaced both camshaft sensors, didn't help. Car runs but it runs rough and stalls out. It's getting worse and worse. What could it be?


P0017 is a code for a bad CRANKSHAFT position sensor. Try replacing that. It will probably fix the problem. They go bad quite often.

Jul 01, 2015 | Chrysler Cars & Trucks

1 Answer

How to get rid of mercedes codes p0016 and p0017 on car for inspection


...either fix the camshaft sensor or find if car is out of time.

Jul 26, 2014 | Mercedes-Benz E350 Cars & Trucks

1 Answer

Check engine light on my 2007 saturn aura xr. Codes read p0011, p0016, & p0017. Just where is the crankshaft position sensor located on the 3.6 engine?


a Honda Saturn. and zero post, i wonder why.
the Saturn (and honda) FSM both tell you how to diagnose all DTCS.
why not read that.
and btw, the codes never tell you what parts is bad but rather ,they only tell you which tests fails.
the tech will test the sensor and see that its good, (say) then finds the connector bad, saving $200 in useless parts.
or more.
RTM , READ the FSM, and read what the test does.
and get the freeze frame and see what is going on.

Aug 29, 2013 | 2000 Honda CR-V

1 Answer

What do P0016 and P0017 codes mean on a 2010 Equinox?


P0016 is the crankshaft position (CKP) to intake camshaft position correlation; P0017 is the exhaust camshaft position correlation.

P0016 sets when 'The ECM detects 8 of the last 10 cam sensor pulses occur during the incorrect crankshaft position."
P0017 sets when 'The ECM detects 25 out of the last 35 cam revolutions occur with 2 cam sensor pulses outside the CKP window."

Basically, you're getting pulses when they shouldn't happen, from both cam sensors, or the CKP is generating incorrect window info. Since the CKP is the common element, it's probably the culprit.

The cam position sensors are at the back of the head, one on each side corner. The CKP is under the oil filter housing, above the starter. To replace the CKP, you're supposed to remove the intake manifold and starter.
__________________

Dec 30, 2012 | 2007 Chevrolet Equinox LS New Cars

2 Answers

Ml350 replaced a/b cam position sensor reset computer & and erra codes p0016/p0016 check engine ligth is reset car drives with light off when engine is turn off and started the light goes out if you...


P0010....'A' Camshaft Position Actuator Circuit (Bank 1)

P0011....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

P0012....'A' Camshaft Position - Timing Over-Retarded (Bank 1)

P0013....'B' Camshaft Position - Actuator Circuit (Bank 1)

P0014....'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 1)

P0015....'B' Camshaft Position -Timing Over-Retarded (Bank 1)

P0020....'A' Camshaft Position Actuator Circuit (Bank 2)

P0021....'A' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

P0022....'A' Camshaft Position - Timing Over-Retarded (Bank 2)

P0023....'B' Camshaft Position - Actuator Circuit (Bank 2)

P0024....'B' Camshaft Position - Timing Over-Advanced or System Performance (Bank 2)

P0025....'B' Camshaft Position - Timing Over-Retarded (Bank 2)

I think your sensors are pattern parts and the readings /resistances are not the same as the original parts ,try some bosch units is my first suggestion ,

Nov 02, 2010 | Mercedes-Benz ML350 Cars & Trucks

2 Answers

Jaguar xj 40 sovereign 1994 error code 17


I'm not a Jag expert, but error code 17 is:
P0017 Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor B)
Additional infomation on and cause and possible solutions are here:
http://www.obd-codes.com/p0016
Basically, it looks like you have timing issue. Could be the cam or crank sensor or the timing belt.
The P0017 code would imply that you have at least two cam sensors (V6 or V8). The computer thinks that the B sensor cam is out of time with the other cam and the crankshaft. Depending on the cost and location, you might try changing the cam sensor first. The cost to check or replace the timing belt is probably going to be painful.

Jun 12, 2010 | 1994 Jaguar XJ6

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Saturn Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Saturn Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...