Question about 2000 Nissan Xterra

Open Question

CODE P1605 HOW TO FIX THE A/T DIAGNOSTIC COMMUNICATION LINE

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 05 Ford mustang v6, my fan only comes on when i turn my AC on and makes a funny noise when I turn the AC on, diagnostic test gave me a code, u1900, what does this mean and how do I fix it?


Where did you pull this code from ? What type scan tool did you use ,or was it a code reader ? Do you know about data communication networks on modern cars ? A U codes indicate a communication problem on the data network .
U1900 CAN Communication Bus Fault-Receive Error Audio Control Module REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error ABS Module REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error Instrument Cluster REFER to Section 418-00 . U1900 CAN Communication Bus Fault-Receive Error SJB REFER to Section 418-00 . The thing that would make this easier to diagnose would be to have a factory scan tool or a professional grade . Need to know what modules can communicate with scan tool .Honestly ,Don't think you can fix this . Dealer or ASE certified repair shop .Do you know what C.A.N. - controller area network is ? The vehicle has 3 module communications networks:
  • high speed controller area network (CAN)
  • medium speed CAN
  • international standards organization (ISO) 9141 communications network
The diagnostic tool connects to the communications networks through the data link connector (DLC). The DLC allows a diagnostic tool access to diagnose and test the vehicle systems of any module on the communications networks.
All 3 communications networks are connected to the DLC. This makes diagnosis and testing of these systems easier by allowing one diagnostic tool to be able to diagnose and control any module on the 3 communications networks from one common connector. The DLC can be found under the instrument panel between the steering column and the driver door. Which module doesn't communicate with scan tool ?
Symptom Chart Condition Possible Sources Action
  • The anti-lock brake system (ABS) module does not respond to the diagnostic tool
  • Circuit or connection in the high speed controller area network (CAN)
  • ABS module
  • Go To Pinpoint Test A .
  • The audio unit does not respond to the diagnostic tool
  • Circuit or connection in the medium speed controller area network (CAN)
  • Audio unit
  • Go To Pinpoint Test B .
  • Circuit or connection in the medium speed controller area network (CAN)
  • Audio unit
  • Go To Pinpoint Test B .
  • The instrument cluster does not respond to the diagnostic tool - high speed controller area network (CAN)
  • Circuit or connection in the high speed CAN
  • Instrument cluster
  • Go To Pinpoint Test C .
  • The instrument cluster does not respond to the diagnostic tool - medium speed controller area network (CAN)
  • Circuit or connection in the medium speed CAN
  • Instrument cluster
  • Go To Pinpoint Test D .
  • The powertrain control module (PCM) does not respond to the diagnostic tool
  • Circuit or connection in the high speed controller area network (CAN)
  • PCM
  • Go To Pinpoint Test E .
  • The restraint control module (RCM) does not respond to the diagnostic tool
  • Circuit or connection in the international standards organization (ISO) 9141 communications network
  • RCM
  • Go To Pinpoint Test I .
  • The smart junction box (SJB) does not respond to the diagnostic tool
  • Circuit or connection in the medium speed controller area network (CAN)
  • SJB
  • Go To Pinpoint Test F .
  • No high speed controller area network (CAN) communication
  • Circuit or connection in the high speed CAN
  • High speed CAN modules
  • Go To Pinpoint Test G .
  • No medium speed controller area network (CAN) communication
  • Circuit or connection in the medium speed CAN
  • Medium speed CAN modules
  • Go To Pinpoint Test H .
  • No international standards organization (ISO) 9141 communications network communication
  • Circuit or connection in the ISO 9141 communications network circuit
  • Restraint control module (RCM)
  • Go To Pinpoint Test I .
  • No module/network communication - no power to the diagnostic tool
  • Data link connector (DLC) C251
  • Bussed electrical center (BEC) fuse 4 (30A)
  • Smart junction box (SJB) fuse 8 (10A)
  • Circuitry
  • Diagnostic tool
  • Go To Pinpoint Test J .

Apr 11, 2016 | Ford Cars & Trucks

1 Answer

What are the probable causes of DTCs P1603, P1604, and P1605?


OBD-II code P1603 indicates an issue with TCU communication.
There are communications that exist between the engine control module, or ECM, and the transaxle control module, or TCM. This communication is done through a control area network, or CAN. With the communication of the CAN, an independent pin and wiring is needed to receive a signal that includes sensor information from the ECM. The more information there is to communicate, the more wiring that is needed. When it comes to CAN communication, all of the information communicated is done alone control modules like the ECM and TCM using CAN lines. When there is a problem with these lines, the ECM will detect the problem and store a P1603 trouble code; the storing of the trouble code is what causes the SES or check engine light to illuminate on the dash.
Possible causes of trouble code P1603 include:
  • Faulty transaxle control module (TCM)
  • Faulty engine control module (ECM)
  • Harness running from the TCM to the ECM has a short
  • There is a poor electrical connection between the TCM and ECM
Diagnosing the exact cause of the problem should always begin with a visual inspection that could reveal bad wiring, loose connections, or damaged parts. From there, it is a matter of running down the list to determine what needs to be replaced. In general, a bad ECM will cause a loss of power, poor fuel economy, and stalling engine. While a bad TCM will have more prevalent transaxle issues like erratic shifting
P1605 and P1605
These codes are indicating a starting problem and rough idling. Code p1604 is a very vague code and diagnosing it without having a symptom is very complicated. And code p1605 is rough idling which means that the computer have noticed a rough idle situation usually this code is accompanied by other codes or if it's alone then I would suspect a fuel pressure issue. These two codes involve diagnosis and we'll need to dig into this problem deeper to find out what's causing them, Unless you are an experienced technician who need assistance then I will suggest that you take your vehicle to your local toyota dealership and they should be able to find the problem.
P1P

Feb 12, 2016 | 2011 Toyota Sienna

1 Answer

I have 2000 mustang 3.8 n it shakes really bad n code p1633 comes back. Whats wrong n how do i fix it


Hello Paige ! It sounds like you have a sick vehicle , lets see if I can help you fix it . Well the code you have has to do with lack of voltage to the ECM -engine control module.
P1633 - Keep Alive Power Voltage Too Low Indicates that the Keep Alive Power (KAPWR) circuit has experienced a power interrupt.
  • Open KAPWR circuit
  • Damaged PCM
  • Intermittent KAPWR Circuit
2000 PCED On Board Diagnostics II SECTION 5: Pinpoint Tests Procedure revision date: 01/31/2001 QB: Diagnostic Trouble Code (DTC) P0603/P1605/P1633 > QB: Introduction QB1 CHECK BATTERY TERMINALS
    Note: If KAPWR is interrupted to the PCM (that is, when a breakout box is installed or the battery is disconnected), DTC P0603/P1605 can be generated on the first power-up.
  • Inspect the battery cables for loose connections, corrosion.
Are the battery terminal connections in good condition? Yes No KEY OFF. Battery terminals are OK. GO to QB2 . REPAIR battery terminals as necessary. QB2 INSPECT ENGINE COMPARTMENT FOR PROPER WIRE ROUTING
  • Inspect Electronic Engine Control (EC) System wiring for proximity to ignition components or wires.
Is wiring too close to ignition components or wires? Yes No REROUTE as necessary. Engine compartment wire routing is OK. GO to QB3 . QB3 CHECK KEEP ALIVE POWER (KAPWR) TO PCM
    Note: Refer to the PCM connector pin numbers in the beginning of this pinpoint test.
  • Disconnect PCM.
  • Measure voltage between KAPWR circuit at the PCM harness connector and ground.
  • While observing digital multimeter, grasp the Electronic EC harness and wiggle, shake or bend a small section while working from the PCM to the dash panel.
Does the voltage reading indicate less than 10.5 volts? Yes No ISOLATE and REPAIR open circuit. No open in KAPWR harness circuit detected. GO to QB4 . QB4 CHECK FOR REPEAT OF DTC P0603/P1605/P1633
  • Reconnect PCM.
  • Start engine and allow it to reach operating temperature.
  • Run Key On Engine Off Self-Test.
  • Retrieve Continuous Memory DTCs.
Is DTC P0603, P1605 or P1633 present? Yes No REPLACE the PCM. REPAIR other DTCs as necessary. If none, testing is complete. You may want to take this to the repair shop , do you own a volt ohm meter ? Do you know how to use one ?

Mar 14, 2015 | 2000 Ford Mustang

1 Answer

1989 Mercedez benz 190e rear window won't go up or


Maybe CAN-H line connected to the electronic control unit of the rear of poor contact may cause vibration when the vehicle line communication is interrupted or irregular pulse signal is generated. Interfere with the normal communication CAN data bus. You can use a professional diagnostic tool for Mercedes-Benz.

Aug 26, 2014 | Mercedes-Benz Cars & Trucks

1 Answer

P1605 code


go to www.aa1car.com and get the topics for OBII and fix it.
God bless you

Jul 23, 2013 | Cars & Trucks

1 Answer

Error code P1605 and P1775 on 2004 Land Rover Freelander


P1605....Serial data communication problem with HVAC modul
P1775 Transmission system MIL fault
Go to the repair shop , for scanner and computer test.
The best (safest)way to erase trouble codes is to use a scan tool. The tool communicates with the vehicle computer and tells it to erase the codes. It does not alter any other learned settings that should be retained for normal vehicle operation.
The worst way to clear codes is to disconnect the battery. In most older vehicles (those made before 1996), disconnecting the battery even for a few seconds, or removing the power fuse for the engine computer (PCM) will erase the codes, along with all of the other learned settings the computer has stored over time.

Sep 18, 2012 | 2004 Land Rover FreeLander

Not finding what you are looking for?
2000 Nissan Xterra Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76132 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...