Question about 2005 Mazda 6

Open Question

Mazda 6 brakes

No pressure in lines

Posted by Anonymous on

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Location of abs pressure switch on 2003 mazda tribute


probly in the abs module-which is in the brake fluid line--a new module can cost 3000--if the fluid is dark changeit cause it destroys the modules--remembr u can stil brake w out antilock

Nov 12, 2014 | 2003 Mazda Tribute

1 Answer

No brake pressure


Check all the brake line, one must be leaking

Aug 04, 2014 | 1995 Mazda Protege

1 Answer

No brake pressure


May still have air in the lines. Make sure your fluid isn't old. Brake fluid absorbs moisture and will cause a sponges feeling also

Aug 04, 2014 | 1995 Mazda Protege

1 Answer

Where do we find the place to put the clutch/gear fluid for a manual transmission for my mazda mx-6 1993.


The clutch on mazda cars shares the same fluid reservoir as the brakes. Bleeding the clutch is just like the brakes. The clutch slave cylinder is on the front side of the transaxle. You can find it by following the line from the master cylinder that does not go to the ABS unit/brakes. bleed just like brakes, you have to pump cl utch to get are out of it.

Jul 14, 2010 | 1993 Mazda MX-6

1 Answer

Mazda miata 2003 replaced rear brake pads now parking brake does not work any ideas?


Doe's the back brakes work? Is number 7 and 15 hooked up right? If they are. Try backing up and hitting brakes, This will tigjhten them up.
1 – SUPPORT PLATE
2 – RETURN SPRING
3 – ANCHOR PLATE
4 – RETURN SPRING
5 – CABLE GUIDE
6 – PARKING BRAKE LEVER
7 – ADJUSTER CABLE AND SPRING
8 – SHOE RETAINER, SPRING AND PIN
9 – SECONDARY SHOE AND LINING
10 – LEVER SPRING
11 – ADJUSTER LEVER
12 – ADJUSTER SCREW ASSEMBLY
13 – SHOE SPRING
14 – PRIMARY SHOE AND LINING
15 – PARKING BRAKE STRUT AND SPRING e753404.png

May 24, 2010 | 2003 Mazda MX-5 Miata

1 Answer

Brake pedal hits floor with no pressure


if the brake fluid resovoir is full and you havent opened the brake brake system (ie a bleeder screw or removed a brake line) then you probably need a master cylinder. if the brake fluid IS empty then first you must find the leak and repair it before bleeding will do any good.

Jan 02, 2010 | 2002 Mazda Protege

3 Answers

2003 mazda protege 5,changing brake pads caliper piston will not go back


you will need to remove the brake line from the caliper, if the caliper will go back then you could possibly have a bad brake line. Also, you should open the reservoir when pushing the caliper back to allow the pressure to release. If the caliper does not go back, then you will need to either rebuild or replace the caliper.

Jul 12, 2009 | 2002 Mazda Protege

1 Answer

2005 MAZDA 6 BRAKE PADS


Since you are taking it back, have them check all the brake lines in front, and the wheel cylinder (if the back has drum breaks). Although you had only the front done, it's a good ideas to have them check the back brakes, and the master cylinder. Check your brake fluid before taking it back and make sure it's full, if so, you may just have air in the brake lines. If this is the case, either they forgot to bleed the brakes, or didn't bleed them enough.

Apr 01, 2009 | 2005 Mazda 6

1 Answer

Unable to depress the brake pedal


your power brake booster has failed, or the large vacuum line to it under the hood has come undone.

Mar 24, 2009 | Mazda B4000 Cars & Trucks

Not finding what you are looking for?
2005 Mazda 6 Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...