Question about Cars & Trucks

Open Question

P0641gmc Engine Light ON Traction control off

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
GM Elec
  • 1000 Answers

SOURCE: Traction control

Lvan....Have you had the codes pulled for the ABS failure? I would not be supprised if you have a wheel speed sensor failure.
Check with your local Auto Zone or other after market part store, they will pull codes for you for free in most cases.
Let me know.
Regards,

Posted on Feb 10, 2009

Ad
mkv0525
  • 358 Answers

SOURCE: 92 lexus ls 400 check engine and traction control light came on at the same time, 92 lexus ls 400.

the track off light will come everytime yhe check engine light comes on. this is normal. you need to have the check engine light checked first.you can go to your local parts house they will scan it for so you at least see what area you problem is in and then you can start from there. let me know lf you find out youe engine codes.

Posted on May 27, 2009

emissionwiz
  • 76630 Answers

SOURCE: Check Engine light and traction control light stay

there is nothing to do here but have the dealer run a scanner test to see what trouble codes were set with the lights coming on, until then there is no way to tell what the problem might be as there are over 200 possibilities.

Posted on Jun 22, 2009

  • 1 Answer

SOURCE: abs light/traction control light

You can check out what the trouble code is by pushing and holding the information button and the up arrow (right side of instrument cluster above the radio) until all the instrument clusters light. Press the information button (last) to enter test mode. I've had an error C1234, meaning Left rear wheel sensor fault. I found the problem to be a corroded connector under the chasis just under the rear left door about 2 feet in. I had to by-pass (replace 1 wire due to corrosion at the connector.

Posted on Sep 15, 2009

  • 396 Answers

SOURCE: Engine light and ABS traction control light remain

The ABS sensor is a speed sensor also for Traction Control. This is why both lights are on , One of your front ABS sensors are bad or disconnected, or has a pinched wire.

Posted on Jan 16, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 GMC Sierra traction control light on


traction control light on . DTC'S - diagnostic trouble codes are stored in ABS control module pointing to the malfunction . Take to a qualified repair shop or to auto part store that can pull these code. DTC C0242 00: Engine Control Module (ECM) Indicated TCS Malfunction
DTC P0856: Traction Control Torque Request Circuit
The electronic brake control module (EBCM) and the engine control module (ECM) simultaneously control the traction control. The EBCM sends a serial data message to the ECM requesting torque reduction. When certain ECM DTCs are set, the ECM will not be able to perform the torque reduction for traction control. A serial data message is sent to the EBCM indicating that traction control is not allowed.
DTC C0561 4B: System Disabled Information Stored Calibration Not Learned
DTC C0561 54: System Disabled Information Stored Temparature High
DTC C0561 59: System Disabled Information Stored Component Protection Time Out
DTC C0561 71: System Disabled Information Stored Invalid Serial Data Received
DTC C0561 72: System Disabled Information Stored Alive Counter Incorrect
DTC C0561 74: System Disabled Information Stored Value of Signal Protection Calculation Incorrect
DTC C0561 75: System Disabled Information Stored Signal Above Allowable Range

Traction Control Off Indicator
The IPC illuminates the traction off indicator when the following occurs.
• The EBCM disables engine torque reduction due to a malfunction and sends a serial data message to the IPC requesting illumination.
• The driver manually disables VSES and engine torque reduction by pressing the traction control switch. The EBCM sends a serial data message to the IPC requesting illumination.

Sep 04, 2017 | GMC Cars & Trucks

1 Answer

Traction control lights come on dash in Holden Captiva 2010 diesel lack of power


when the traction control is activated , there is a reduction of power from the engine to compensate for that lost traction control
run the fault codes , repair the reason for the traction control light and then reset the computer using a scan tool and the engine power will return

May 13, 2015 | Holden Cars & Trucks

1 Answer

Warning light on dashboard. With squiggly tire


That is the traction control light. If it comes on when you start and stays on there is a problem with the traction control system. If the check engine light is on the traction control light will also come on to let you now that it is disabled.

Year, Make, Model, and Engine Size?

Sep 27, 2014 | Cars & Trucks

2 Answers

Check engine light on traction control light on cruise light blinking whats wrong?


When you have a check engine light come on, the traction control light and the cruise lights both come on as well. You need to have the codes checked with a scanner. There most likely isn't a problem with the traction control or cruise systems, the lights turn on because those systems work together with the engine management system or PCM. When there is an engine problem that sets a code that turns on the check engine light, it automatically disables the cruise control and traction control for safety reasons. Because the last thing you want is to have an issue with traction control and/or cruise control if your engine is having an issue, which is why they are disabled. The most common problem that turns on the check engine light is a loose, cross-threaded, or snug but not tight enough fuel filler cap. Subaru recommends three clicks of the cap to be considered tight. Also, any parts store can and will check and/or clear codes for free. I hope this info helps!

Sep 08, 2014 | 2011 Subaru Impreza

1 Answer

Had new tries put on yesterday and now traction control light and engine check light have come on


Any time the check engine light comes on the traction control will be disabled and the light will also come on. Start with scanning the engine computer for trouble codes to see why the check engine light is on.

Sep 20, 2012 | 1999 Lexus ES 300

1 Answer

Check engine light and TC light came on and car lost engine. Still had power steering and brakes. Have attempted to restart but will not. Any ideas?


I am more familiar with Ford products. If you have a cutoff for the traction control on your dash you want to remove a battery cable to get the Engine light to clear.

Reattach the cable after 10 minutes and turn off the traction control. Then try starting the car. If that does not work disconnect the fuse to the traction control and then try starting again.

All the traction devices interrupt the engines as part of stopping the wheels from spinning. The Traction Control on yours is stuck. If you can eliminate that feature you may get your engine to run again.

Apr 13, 2010 | 2005 Chevrolet Equinox

2 Answers

What does the master warning light mean? (triangel with ! and the three lights points to the car).


This light shows operational status of traction control system. If it is constantly lit when engine is running, this means that traction control system is off. If the light flashes during driving, it means the loss of traction at the wheels, and traction control system is operating- decreasing engine torque to stop exessive wheelspin.
Good luck.

Mar 21, 2010 | 2003 Toyota Prius

1 Answer

RECENTLY MY CHECK ENGINE LIGHT CAME ON THEN MY TRACTION CONTROL LIGHT CAME ON....THE CODE GIVEN TO ME FOR THE CHECK ENGINE LIGHT WAS P0171 COULD THEY BE RELATED....ALSO CAR IS SHIFTING REAL ROUGH


Engine light on means that your lambda probe is malfunctioning just raplace it and it will come off,or the mixture of gases and gas is not proper and you need to tune the car at bosch motronic.
traction control warning light means that the sensors analizing it are malfunctioning and or you have a serious problem on the traction control

Jan 20, 2010 | 1999 Lexus ES 300

1 Answer

Warning lights what do they mean, a triangle with a line in the middle


This is the Traction Control Warning light. Traction control is device added to the engine/gearbox sytem, and is designed to help minimise wheel spins when moving away, particularly on a slippery surface. When the system detects the wheels starting to slip and Traction control starts to cut in this warning light shows.

Traction control cannot do much to help in severe ice or snow though, so you can expect to see this light showing or flashing if the conditions are extreme.

If this light shows when the conditions are not extreme, stopping and restarting the engine will often reset it.

Dec 17, 2009 | 1992 BMW 5 Series

4 Answers

What does the TCS Off button do?


TCS stands for Traction Control System.
The traction control system works in conjunction with your Antilock Brake System (ABS) and your Engine Control Module (ECM) or Powertrain Control Module (PCM) or Electronic Control Unit (ECU) (Note that ECM, ECU, and PCM all mean the computer that controls your engine, depending on make.)

Anyway, the traction control system can apply one or more of the brakes and control engine RPM in the event that a wheel slip has been detected by the traction control system.

Pushing the TCS button on most models will light a lamp in the instrument cluster that usually says "Trac Off" Pressing it a second time will turn this light back off.

When the "Trac Off" light is illuminated, the Traction Control System is disabled and will not work in the event of a wheel slip.

Also note that when the Traction Control System is working and a wheel slip is detected, The Traction Control Module will usually illuminate a light that says "Trac" as it is taking control of your brakes and engine. It can feel really strange when this occurs and some people think that their transmission is slipping or that their engine has a misfire problem.
The chances are that if it occurred on wet, slippery pavement, the Traction Control System may have just saved your life.

If this is happening on dry pavement and normal driving conditions (starting, stopping, or turning), there may be a problem with the system. "False Traction Control" can happen just like a bad wheel sensor causing "False Antilock Mode".

Also check your Owners Manual for more specific information pertaining to your particular vehicle.

Oct 18, 2009 | 2004 Honda Accord

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

11 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...