Question about 1995 Ford Taurus
How do you remove the rear seat in a 1995 ford taurus
Get in the back and push on bottom front of the seat it will go back in and then u pull it up and out
Posted on Mar 20, 2014
Push down on the seat and in at the same time should feel it unlock,you have to do it on each side get in the car push the bottom of the seat in and lift or if you have the other style look where the bottom part of the seat meets the floor and carpet you may have to pull carpet back a little and see if there is a bolt on each side hope this helps
Posted on Mar 20, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
you have to remove the seat, remove the lower part first, it snaps in, then remove top part of seat, then you will see the pop in fasteners that hold the rear deck. if you have a problem go to this web site it will help with step by step instrucations. hope this is helpful. chttp://www.crutchfield.
Posted on Jan 19, 2010
the piston need to be turn clock wise and push at the same time make sure when you turn it the rubber around the piston dont get damaged it stick to the piston and get torn before you turn just make sure it not sticking to the piston at the auto part store they sell the toll to turn the piston its cheap$$ hope it FIXYA our post thanks pierre
Posted on Jul 06, 2008
Ignition Lock Cylinder
Ford Taurus/Sable 1986-1995 Repair Information
REMOVAL & INSTALLATION
The following procedure applies to vehicles that have functional lock cylinders. Such cylinders either have a key available or known key numbers from which a key can be made.
Using the key, turn the ignition lock cylinder to the RUN position, then depress the retaining pin using a wire pin or small drift
The following procedure applies to vehicles in which the ignition lock is inoperative and the lock cylinder cannot be rotated due to a lost or broken key, unknown key number or a lock cylinder cap that has been damaged and/or broken to the extent that the lock cylinder cannot be rotated.
Posted on Feb 15, 2009
Locaed on the bulkhead on the passangers side. A plastic shield runs along the top of the bulkhead hald by three plastic clips and screws. remove this and you will see the connector port.
Posted on May 19, 2009
right before the seat where ur legs usally go there are two bolts one on the left side and one on the right
thats all there is to it
Posted on May 28, 2010
Tips for a great answer:
Sep 16, 2014 | 1995 Ford Taurus
Apr 29, 2014 | 1995 Ford Taurus
May 18, 2011 | 2003 Ford Taurus
Jan 30, 2011 | 2002 Ford Taurus
Mar 07, 2010 | 1995 Ford Taurus
Jan 19, 2010 | 1994 Ford Taurus
Oct 02, 2009 | 1995 Ford Taurus
Sep 29, 2009 | 1995 Ford Taurus
Jul 06, 2008 | 1995 Ford Taurus
Sep 17, 2014 | 1995 Ford Taurus
83 people viewed this question
Usually answered in minutes!