Question about 2000 Chrysler LHS
What is the firing order for the ignition coil packs
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
I had the same problem. My Chrysler LHS kept overheating. I had the thermostat changed out first and it didn't help. Then I had the water pump changed out and still did no good. Then changed out the radiator, still overheated. Come to find out the people that changed my thermostat put it in backwards. Evidently, the thermostats for these cars look different from all the others and people are not sure how to put them in. I took mine to a Chrysler dealer and they fixed it for me.
Posted on Apr 15, 2009
fix the radiator first.because coolant temperature sensor need to be in antifreeze.when antifreeze get up to 190 degrees. the coolant sensor act as a thermostat.it resistance decrease then the pcm will command cooling fans to run.if antifreeze low the coolant temperature sensor not going to work. engine is going to over heat.
Posted on May 29, 2009
SOURCE: 1996 Chrysler LHS not firing
First, check the ECM fuse in the power control module (it will be a yellow 20 amp fuse). Second, check the timing belt. You can pull out the cam sensor and look in the hole while someone cranks the motor. If the cam gear is not turning, the timing belt is broken. VERY IMPORTANT - when replacing the cam sensor, get a special adhesive pad from a Chrysler dealer that attaches to the bottom of the sensor to set the proper gap (cost about $2). Install the cam sensor until the pad touches the gear and tighten down the locking bolt. The pad will wear off in normal running. If the gap is not set correctly using this gapping pad, you won't start.
Posted on Jun 03, 2010
Here is a firing order diagram to help assist you and let me know if you need any help understanding this diagram, or if you require any further assistance.
Posted on Oct 18, 2010
For spark plug problem,click the help links provided below :---Car has no spark?http://schematicsdiagram.blogspot.com/2011/06/car-has-no-spark.html ------------------------
------------How to Replace Spark Plugs?http://schematicsdiagram.blogspot.com/2011/07/how-to-replace-spark-plugs.html
-------------Car cranks, has spark but will not start?
The spark plug firing order for car?http://schematicsdiagram.blogspot.com/2011/06/spark-plug-firing-order-for-car.html
----------How to gap spark plug ?http://technoanswers.blogspot.in/2012/02/how-to-gap-spark-plug-on-chevy-impala.html-----------Spark plug Replacing for?http://technoanswers.blogspot.in/2012/02/spark-plug-replacing-for-chevy-impala.html
-----------How to identify number one spark plug on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-to-identify-number-one-spark-plug.html
---------How does the spark plug wire go on the distributor cap?http://schematicsdiagram.blogspot.com/2011/12/how-does-spark-plug-wires-go-on.html
---------Spark plug Firing Order Diagram?http://schematicsdiagram.blogspot.com/2011/12/2006-suzuki-forenza-spark-plug-firing.html
-----------This will help.Thanks.
Posted on Feb 26, 2012
Tips for a great answer:
Mar 19, 2014 | 2000 Chrysler LHS
Mar 19, 2010 | 2000 Chrysler 300M
Sep 06, 2009 | 1994 Chrysler LHS
May 24, 2009 | 1995 Chrysler LHS
Mar 08, 2009 | 1999 Chrysler LHS
Jan 20, 2009 | 2000 Chrysler LHS
Dec 23, 2008 | 2000 Daewoo Lanos
32 people viewed this question
Usually answered in minutes!