Question about 2003 Chevrolet Blazer

1 Answer

Can i take the fuse out or the abs system without a problem

Can i disconnect my abs system?

Posted by on


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert who has written 50 answers of more than 400 characters.


    An expert who has answered 200 questions.

  • Expert
  • 220 Answers

You can. Of course the ABS portion of the brakes will not work, but the brakes will manually function just fine. You will just have to rely on your foot to control brake function. I wouldn't tell my insurance company I did it. I completely removed my ABS from a 95 Suburban. The early GM anti skid systems were pretty bad. Not sure about your year.

Posted on Mar 21, 2014


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where do I find the fuse for the ABS system in a 2007 Ford Explorer

F33-30amp an F6-40amp in the under hood fuse box ! Is ABS light lit ? Pulling fuse's may not turn it off > There is also a relay , but it powers up other thing's besides so you can't disconnect it .

Sep 14, 2016 | 2007 Ford Explorer

1 Answer

Please tell me what repair needs to be done.The ABS yellow light is on and the motor kept running before disconnecting the orange plug in the fuse box under the hood on my 2000 Lincoln Navigator"

No body on the phone or internet can tell you a thing
about any vehicle repairs without the vehicle

You need the vehicle at a repair shop in the hands
of knowledgeable people with the factory reference
material to study the systems with a fault & do some testing

Feb 27, 2013 | 2000 Lincoln Navigator

3 Answers

Can the abs brakes system be changed to a standard system and how?

Anything that disables the ABS,pull the fuse,disconnect a wheel sensor,unplug the controller,
will turn on the ABS light and the brakes will be normal base brakes.

Mar 05, 2011 | 1993 Plymouth Voyager

2 Answers

I have a 2002 Sunfire and my ABS system prevents me from being able to control my steering and braking. I was told by my mechanic back home to manually disconnect it from the hood. However, when I look...

I dont thinks its a good idea to disconnect a built in safety feature, But if you pull the fuse, its not going to work. the fuse is under the hood, 50 amp ABS fuse, in the fuse box under the dash 10 amp abs fuse

Dec 14, 2010 | 2002 Pontiac Sunfire

2 Answers

Can i bypass the abs system on my 98 ford windstar

Are you wanting to discontinue the abs? If so, then keep in mind that you will no longer have abs. The brakes will still function the same without abs. In order to "bypass" the abs system, locate the main fuse/control box under hood. There should be either a relay or large fuse marked for abs. If so, simply remove the fuse/relay.

Jun 09, 2010 | 1998 Ford Windstar

1 Answer

Would it be ok to take the fuse out for the abs since it cuts itself off because it's not working properly so I don't have to hear the whinning noise at all

Best thing to do is just take the plug out of the ABS ECU then you see they are just normal brakes then!

I have had problems with 2cars I had with ABS, I have a Range Rover now and I disconnected the ECU the day I got it before any problem! I don't trust ABS !
when it works it's good....When it screws up it KILLS YOU! better off without it.
I thought the idea was for the human driver to have control of the brakes! not some silicine chip!

There you go leave the fuse in because you don't know what else it is serving as well as ABS ! alot of times they do without saying! just disconnect the ECU best way,safest way,fool proof way!

Mar 10, 2010 | 1996 Honda Odyssey

1 Answer

I want to disconnect the abs system on a 2000 chevy blazer 4wd, how do i do this and can I

You can disconnect it by just pulling the fuse out for the ABS sytem. The fuse will be located at the end of the dash on the drivers side. Note that the ABS light on the dash will come on that will indicate that your ABS system is not working. You can ether live with it on, or pull the light out from the instrument panel. Good luck and this should help.

Feb 27, 2010 | 2000 Chevrolet Blazer

1 Answer

2002 pontiac grand prix abs light is on all the time

check the fuse under the hood, you may have to disconnect batterty to do so, this fuse goes and is hundreds of dollars cheaper than if it is something else~! If the ABS IS broken and you are comfortable without it, just remove the fuse and the whole ABS system is disabled leaving you standard non-abs braking without doing any harm.

Aug 16, 2009 | 2002 Pontiac Grand Prix

1 Answer

How to disconnent the ABS on a 1995 Nissan Pathfinder

If you need to disconnect the ABS because it is causing problems or for another reason like that you can either pull the fuse that controls the ABS or disconnect the wire harness that leads to the ABS module.

If your ABS system is functioning properly there is no reason to disconnect it.

Jul 27, 2009 | 1997 Nissan Pathfinder

Not finding what you are looking for?
2003 Chevrolet Blazer Logo

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides