Question about 1997 Dodge Stratus

Open Question

I have a PO306 code on a 2005 Hyundai XG350. If the plugs are not the problem would cleaning the fuel line be the next step?

I opened the valve covers and have good access.

Posted by on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 299 Answers

SOURCE: the durango 1999 is giving a PO300 and PO305 &

The vehicle can misfire for many different reasons. Your first step should be to check to make sure the spark is getting to the spark plugs. Next make sure those cylinders are getting fuel. If all those check out then you will need to check for compression loss. All of these procedures and more can be found at www.autozone.com

Posted on Oct 28, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Alarm randomly going off remote will turn itboff but few mins later starts again


Hyundai XG350 alarm module Questions & Answers - Fixya

www.fixya.com > ... > Tags > alarm module > Cars & Trucks > Hyundai
Hyundai XG350 cars & trucks alarm module questions and answers. Ask your Hyundaialarm ... TURN IGNITON TO ON 4. WAIT 5 ... Hyundai Motor 2005 XG350.

Aug 27, 2015 | Hyundai Motor 2005 XG350

1 Answer

Replaced valve cover gasket. Install everything back. motor does not starting.


check the firing order of the leads when you changed the plugs.

Nov 22, 2014 | Hyundai Motor 2005 XG350

1 Answer

Po306


code po306 refers to cylinder 6 misfire detected===causes ---engine mechanical fault--wiring--ignition/ fuel system--injector--ECT/MAF sensor--ECM

the pressure is good so rule out mechanical fault
injectors being cleaned and tested so rule out injectors
fuel pressure not tested to see if it is average or minimum
check MAF sensor for correct voltage and/ or resistance
IF the misfire moved when the plug and wires were swapped then check the wires and connections . If not then check distributor cap for crack or dirty in side the cap allowing shorting of the HT spark

Jul 18, 2014 | Dodge Caravan Cars & Trucks

1 Answer

Oem code p2422


This code means the Evaporator Emissions valve is stuck closed. This is a small electric solenoid valve that usually fits in line with the evaporator cannister lines. It allows the system to pass Emissions tests and helps gas fumes to be eliminated.

Sep 04, 2012 | Hyundai Motor 2005 XG350

1 Answer

2002 Hyundai XG350 Error Codes P1191, p1193 & P0446


Error codes P1191/P1193 are a paired code indicating the Electronic Throttle Sensor (ETS) had detected engine RPM's of less than 470, resulting in a potential "limp home" mode. Technical Service Bulletin #06-36-003 identified several differing possible causes, ranging from a faulty ETS -to- loose connectors -to- carbon buildup around the throttle body. Error codes P300/P302/P304 are misfire in cylinders 2 and 3. Have your fuel injection system cleaned out with a machine and replace your spark plugs. Error code P0455 indicates a large fuel vapor leak. This code can be caused by the following things:An actual fuel vapor leak, either through a hose or other damaged vapor system component, or via a loose, incorrectly installed, or missing fuel cap. A stuck closed purge control valve, which, during the self-test, will produce fuel tank pressure readings exactly the same as a vapor leak. A close valve that does not seal properly, allowing air to be sucked into the fuel vapor system during the self-test. Blockage in the line to the fuel tank pressure sensor, causing it to not see variations in tank pressure.


That is taken from Michael on fixya. I google the codes and that came up..

Jul 21, 2012 | 2002 Hyundai XG350

1 Answer

What do codes po306 mean ? for a mercury cougar 1999


code po306 means cylinder number 6 misfire detected, possible causes air leak in the intake manifold or in the egr or pcm system, could have mechanical problem number 6 cylinder like burned or worn valves,could have clogged fuel injector or faulty fuel injector,could have bad ignition coil, bad spark plug or bad spark plug wire.

Dec 13, 2011 | 1999 Mercury Cougar

1 Answer

Need to change pully


Which One?
60a96c9.jpg The one on the left has two 14mm fasteners 1 nut & 1 bolt. The one on the right has the same 1 14mm nut and 1 14mm bolt. Both are simple to replace. Step 1: Relieve the tension on the pully you wish to replace. Step 2: remove the pully (front) by removing the 14mm nut. To remove the rear tensioner pully, remove both nut & bolt.

May 19, 2009 | Hyundai Motor 2005 XG350

Not finding what you are looking for?
1997 Dodge Stratus Logo

Related Topics:

22 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

75077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7768 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...