Question about 2003 Opel Corsa

1 Answer

Opel corsa 1.4 gsi 2003, its engine cutoff after 2000 rpm whenever i press clutch. don't know why? it works fine after servicing and replacing oil but after some days the problem appeared. It also has some drop leakage of oil from engine chamber sealing.please suggest.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Opel Master
  • 3,261 Answers

Check your spark plugs wells for oil in them. also check for manifold air leaks spray some carb cleaner on the manifold and lister for engine change depending on the cleaner it will speed up on shut the engine down. also do this to air lines. any oil or water in them clean out if oil the seal on the cam cover is leaking.

Posted on Mar 19, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
alicantecoli
  • 22246 Answers

SOURCE: My Opel Corsa dies down during driving, it will only start again after 7 to 10 mins, l have no clue whats happening.

No idea offhand to be honest i would need my head under the bonnet to know what wrong .could be anything from the gauze filter in the fuel tank on the bottom of the fuel pump becoming chocked up and leaving the car allows it to drop away to a faulty pump overheating or the contacts ,maybe even a ignition module overheating ,Best advice is ask a local mechanic to have a look for you as normally these early opel corsas with the 4 cylinder engine are bullet proof they are even valve free if the timing belt snaps .

Posted on Jan 31, 2012

shawnhowell1
  • 9 Answers

SOURCE: My 1996 opel corsa is losing power while driving, and sometimes it is cuts out completly. The only way to get it to go again i have to stick my foot to the floor that usually works, there does be a re

Sounds like you not getting enough fuel. Try replacing you fuel filter which sits under neath the rear near the tank. Just follow the line from the tank and you'll see it or it can be a faulty fuel pump You should get 3 bars pressure from it.

Posted on Jul 20, 2012

  • 747 Answers

SOURCE: The reset of opel corsa 1.7td

what is the code could be fuse related or connection related even a defective speed sensor

Posted on Aug 29, 2012

  • 16162 Answers

SOURCE: timing marks on engine

Use the timing marks on the damper for the crank and bring it to 0 on the cam there are marks that correspond with a mark on the head. Look on autozone dot com and put in the year make and model then look at the free repair guides.

Posted on Oct 10, 2012

alicantecoli
  • 22246 Answers

SOURCE: How to set pump, crank and cam timing on opel corsa 1.7d utility, model 2003

Not sure here as to the type as some have a bolt in the block in line with the crank and special tool is used to locate TDC ,If the timing belt broke then you have bent valves anyway so the head will have to come off .If you reply with more details then i will advise how to do it with no timing marks also is this a common rail with just a high pressure pump or is it a intermediate with injector pump but the injectors having electronic sensor on one of the injectors if that makes sense to you

Posted on Oct 19, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need the torque settings for 2006 opel corsa gsi 1.8 head


try any opel corsa owners forum
TheCorsa co uk Forums

nothing clear online

why isnt this torque specs and sequence stuck on the VRS head gasket set

Nov 06, 2016 | Opel Cars & Trucks

2 Answers

I want to know the torque opel corsa lite 1.4 cylinder head bolts.


stage 1 ... 25 Nm (18 lb ft)
stage 2 ... angle tighten + 90 degrees
stage 3 ... angle tighten + 90 degrees
stage 4 ... angle tighten + 90 degrees
stage 5 ... angle tighten + 45 degrees

Feb 26, 2015 | Opel Corsa Cars & Trucks

1 Answer

Opel gsi


is it near any major electrical installations , power lines that sort of thing ,just guessing it may be interferance.I'd find another route !

Mar 27, 2014 | 2002 Opel Corsa

1 Answer

Opel corsa 2002 1.6 gsi


are you sure that your ecu is matched properly?

Jun 25, 2013 | Cars & Trucks

2 Answers

Where does the chechis no.in opel corsa 2003 model..??


it can be found in the engine compartment passenger side is a riveted plate. the number is 17 characters long it should look something like this: WOL0SB.........or look next to the front passanger seat on the floor, hidden under a small plastic cover along the door step

Apr 12, 2013 | 2003 Opel Corsa

1 Answer

Cylinder head torque specs for opel corsa 8valve 1.4l 2005 model


Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above.
Corsa 1.4I Engine code Z14XE 2000-2004
Bolts must be renewed
stage 1. 25Nm
stage 2, + 90 degrees
stage 3. + 90 degrees
stage 4. +90 degrees
stage 5. + 45 degrees
Sequence
10 6 2 3 7
9 5 1 4 8
bolts 7 & 8 are nearest to the flywheel side of the engine
Engine code C14NZ 1993-1998
Stage 1. 25Nm
stage 2. + 60 degrees
stage 3. +60 degrees
stage 4. + 60 degrees
Sequence as above. <br />Corsa 1.4I Engine code Z14XE <b>2000-2004</b><br />Bolts must be renewed<br />stage 1. 25Nm<br />stage 2, + 90 degrees<br />stage 3. + 90 degrees<br />stage 4. +90 degrees<br />stage 5. + 45 degrees<br />Sequence<br />10 6 2 3 7<br />9 5 1 4 8<br />bolts 7 & 8 are nearest to the flywheel side of the engine<br />Engine code C14NZ <b>1993-1998</b><br />Stage 1. 25Nm<br />stage 2. + 60 degrees<br />stage 3. +60 degrees<br />stage 4. + 60 degrees<br />Sequence as above.

Jan 09, 2013 | Opel Corsa Cars & Trucks

1 Answer

Reverse lights on Opel Corsa Classic 2000 model not working


check to see that when you put the car into reverse that it is hitting the switch and pressing it in properly, you may need to adjust the switch for it to make proper contact

Nov 20, 2011 | Cars & Trucks

Not finding what you are looking for?
2003 Opel Corsa Logo

251 people viewed this question

Ask a Question

Usually answered in minutes!

Top Opel Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Brad Brown

Level 3 Expert

16147 Answers

george parkes

Level 3 Expert

975 Answers

Are you an Opel Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...