Question about Cars & Trucks

2 Answers

Toyota 4Runner ABS BRAKE warning lights on after 30 seconds

At start up, ABS pumps cycles normally but then continues to run for 1 min. Then all the ABS and BRAKE warning lights and chime start. Clears when re-started.

Posted by on

Ad

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 84 Answers

Check the brake fluid level. There are two brake fluid reservoirs.

Posted on Mar 19, 2014

  • Tony Cantero
    Tony Cantero Mar 21, 2014

    If U go 2 a shop to diagnose, the service is fee IF you authorize them to repair/ service the problem. Otherwise, its $50 minimum to diagnose only. READ the fine print of what constitutes "free diagnostics." Most shops are scammers who specialize in deceit to separate you from your hard-earned $$. Don't sign anything until you've read the exttremely tiny fine print of their contract. Engineers design cars to have high component failure after 6 years. Their ulterior motive is to convince you to junk your present used car and purchase or lease a newer vehicle.

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 156 Answers

This could be many things here going on
Could be the ABS unit itself, wheel sensor, loose wire, mastercylinder, BCM ,
If you don't have the right scanner to check to see what is going on, you could just be tossing money at replacing parts, or get lucky, best thing is go to a brake shop, most offer free inspection and go from there
Now with these cars, not having a scan tool, can cost you more in the long run. But just not a off the self one, which can help save you money, but they only scan the codes in your PCM for OB2 and will clear them.
Like mine, I can control mods, turn things on and off, reflash, check more then just the PCM, it checks TCM, PCM, BCM, brake system, trans, just about everything.
So to save you money, it's best to go to a brake shop that offers free checks and go from there.

Posted on Mar 20, 2014

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 Chrysler Sebring started and turned off three times now, it just has a blinking red light?


Anti-Lock Warning Light (ABS) - If Equipped This light monitors the Anti-Lock Brake System (ABS) described elsewhere in this manual. This light will come on when the ignition key is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on during driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is required, however, the conventional brake system will continue to operate normally provided that the BRAKE warning light is not on. If the ABS light is on, the brake system should be serviced as soon as possible to restore the benefit of Anti-Lock Brakes. 24 7 Locksmith Orchard Park NY 716 710 7400 Locksmith Orchard Park NY

Aug 11, 2016 | Chrysler Sebring Cars & Trucks

1 Answer

ABS ON,BRAKE RED L ON ALARM ON HARD PEDAL HOW CAN I FIND THE PROBLEM


VSC ABS and ! lights plus red (!) - Toyota Prius Forum ...

www.priusonline.com/...toyota-prius.../19804-vsc-abs-lights-plus-red.ht...

Jun 3, 2008 - 8 posts - ‎3 authors
If the accumulator fails, you will get a red brake warning light and the pump will now run continuosly until it burns out. ... hydraulic pressure to the brake system and "no"red warning lights. .... Fog Lights, PassGas, Toyota Prius General Discussion, 4, 10-13-2005 09:12 AM ... 11-13-2015 10:01 PM by Tim Lee.

Alarm with Brake Light, ABS, VSC and amber warning lights ' PriusChat

priuschat.com > ... > Gen 2 Prius Care, Maintenance and Troubleshooting
Jul 26, 2005 - Later that same day - I started getting an alarm - as soon... ... Gen 2 (2004-2009) Toyota Prius Forums > Gen 2 Prius Care, ... Discussion in 'Gen 2 Prius Care, Maintenance and Troubleshooting' started by NorthStar, Jul 26, 2005. ... I am getting the red BRAKE LIGHT, the amber waming symbol, ABS, and ... VSC, ABS, (!) and emergency brake light on
Feb 5, 2010
Brake, Brake warning, ABS, VSC appear
Oct 5, 2008
More results from priuschat.com

Nov 24, 2015 | 2005 Toyota Prius

2 Answers

Is it normal to have a red triangular warning light come on after pressing the start button and then go off as soon as the other lights(car seat, air bag, break etc) go off..


It's normal. It's part of the instrument cluster module doing what's called a "bulb check" on initial start up, and it should go off in under ten seconds, since it does, there is no problem

Feb 17, 2015 | 2015 Toyota 4Runner

1 Answer

Reset abs computer


have a auto check it out and run proper diagnostics 2 reset the codes via computer

Apr 29, 2014 | 2002 Toyota 4Runner

1 Answer

Bmw 3 series abs fault


bit of dirt in abs ring
jet wash all wheels to clear the dirt

Jan 30, 2014 | 2001 BMW 3 Series

1 Answer

91 Buick park avenue abs light. This happened after my friend was driving down the freeway and his tire blew. Now it just blew the rubber off and he was able to drive t off the freeway on the belts. And...


ABS LIGHT AND MODULE TROUBLESHOOTING:



Anti lock brake system light comes up when there is issue with car brake systems. It can be low brake fluid or faulty ABS fuse or its issue with brake system or assembly. Your vehicles brake system needs inspection.


To troubleshoot these issues, I suggest you to refer the help links provided below. There are direct links with accurate solution, for these specific issues.


Click the link below and follow the procedure: ------


All types of ABS LIGHT / brake problems and repairs

http://howtobyme.blogspot.com/2011/11/abs-and-service-light-comes-on.html

-------------------


ABS light stays on but brakes work fine?

http://howtobyme.blogspot.com/2011/11/abs-light-stays-on-but-brakes-work-fine.html

----------------

VCS and ABS lights go on and off intermittently on Lexus?

http://howtobyme.blogspot.com/2011/11/vcs-and-abs-lights-go-on-and-off.html

-------------

The ABS and Traction Control Lights stays ON dash of car?

http://schematicsdiagram.blogspot.com/2011/06/abs-and-traction-control-lights-stays.html

-------------

ABS & Brake lights warning indicator steady on dash and speedometer not working for Dodge Ram?

http://howtobyme.blogspot.com/2011/11/abs-brake-lights-warning-indicator.html

-----------------------

Battery Light and ABS Light on Dash

http://whoisbyme.blogspot.in/2012/07/battery-light-and-abs-light-on-dash.html

-------------

Sometimes ABS light comes on while Driving?

http://howtobyme.blogspot.com/2011/12/sometimes-abs-light-comes-on-while.html

-----------

How Anti-Lock Brakes Work?

http://technoanswers.blogspot.com/2011/11/how-anti-lock-brakes-work.html

-------------

Brake System Troubleshooting?

http://technoanswers.blogspot.com/2011/11/brake-system-troubleshooting.html

-------------

Anti-lock brake light stays on all the time?

http://technoanswers.blogspot.com/2012/01/anti-lock-brake-light-stays-on-all-time.html

-------------------

ABS light comes on and Car makes Grinding noise?

http://repairhelpcenter.blogspot.com/2012/01/abs-light-comes-on-and-car-makes.html

---------------

ABS trouble codes for all models?

http://repairhelpcenter.blogspot.com/2011/11/abs-trouble-codes-for-all-1994-00-acura.html
------------

2008 Toyota Highlander: ABS warning light Blinking and OBD Error codes Coming?

http://technoanswers.blogspot.in/2012/05/2008-toyota-highlander-abs-warning.html

--------------

2003 Lexus ES: VSC, TRAC OFF, ABS lights ON?

http://technoanswers.blogspot.in/2012/04/2003-lexus-es-vsc-trac-off-abs-lights.html

----------------

2008 Toyota Highlander Hybrid: Warning Lights Abs, Vsc & Brake Are On?

http://technoanswers.blogspot.in/2012/04/2008-toyota-highlander-hybrid-warning.html

-------------

ABS & Brake warning lights remains steady on dash?

http://schematicsdiagram.blogspot.com/2011/12/abs-brake-warning-lights-remains-steady.html

------------

Can I drive the car without ABS fuse connected?

http://schematicsdiagram.blogspot.in/2012/02/can-i-drive-car-without-abs-fuse.html

-----------

Where is ABS/TCS module located on 2005 Cadillac Deville

http://schematicsdiagram.blogspot.com/2011/12/where-is-abstcs-module-located-on-2005.html

------------------

ABS motor keeps running?

http://schematicsdiagram.blogspot.com/2012/01/abs-motor-keeps-running.html

------------

When the car stops, abs pump turns ON?

http://howtobyme.blogspot.com/2011/12/when-car-stopsabs-pump-turns-on.html

-----------

Replacing ABS unit on Buick Century?

http://technoanswers.blogspot.in/2012/02/replacing-abs-unit-on-buick-century.html

----------------

2008 Toyota Tacoma: ABS causes Brake pedal fade?

http://technoanswers.blogspot.in/2012/04/2008-toyota-tacoma-abs-causes-brake.html

--------------

Toyota Camry: Premature ABS Actuation?

http://technoanswers.blogspot.in/2012/04/toyota-camry-premature-abs-actuation.html

-----------

How to replace ABS Modulator Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-modulator-control.html

----------------


How to replace ABS Pump Assembly on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-replace-abs-pump-assembly-on.html

-----------


How to remove ABS Accumulator on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-accumulator-on-acura.html

---------


How to remove ABS Control Unit on Acura Integra?

http://repairhelpcenter.blogspot.in/2011/11/how-to-remove-abs-control-unit-on-acura.html

------------

These details will help.

Thanks.

Feb 04, 2013 | Cars & Trucks

2 Answers

Blinking Orange Exclamation Point on 04 4runner


Since your question is listed as a 1999 Saturn SL and a Toyota 4Runner, I will answer both:

1999 Saturn SL
Typically the orange exclamation point dash warning light is indicating a problem with your brakes, parking or hand brake. Check to ensure that your emergency brake is completely disengaged.
Check to ensure proper brake fluid level.
Otherwise this could be indicating a problem with the ABS system.

04 Toyota 4Runner
Low tire air pressure. Inflate to approximately 32 PSI should correct your problem.

I hope this helps.

May 12, 2010 | 1999 Saturn SL

1 Answer

My 2005 Toyota 4runner ABS warning light came on and went off. Now I can't shift into any gear. (auto)????


Look for a bad brake light switch above the brake pedal. If the brake light switch is not working, the shifter unlock solenoid, which gets power form the brake light switch, will not activate, and your shifter will not come out of park.

Sep 15, 2009 | 1995 Toyota 4Runner

1 Answer

ABS brake module sounds like a motor running and won't stop unless battery is disconnected. what is fix?


I would pull the fuse for the ABS hydraulic pump and then put it back in and see what happens. Don't ever recall a pump running. Dealer may need to hook up scan tool for diagnostic fault codes, DTCs.



Principles of Operation
The ABS control module receives wheel speed readings from both front wheel speed sensors and the rear differential speed sensor, and processes this information to determine if an ABS event is necessary. The wheel speed sensor electrically senses each tooth of the ABS sensor indicators as it passes through the wheel speed sensor's magnetic field.
The ABS control module continuously monitors and compares the rotational speed of each wheel speed sensor indicator and, when it detects an impending wheel lock, modulates brake pressure to the appropriate brake caliper(s). This is accomplished by triggering the hydraulic control unit (HCU) to open and close the appropriate solenoid valves. Once the affected wheel returns to normal speed, the ABS control module returns the solenoid valves to their normal position, and normal (base) braking resumes.
The ABS control module is self-monitoring. When the ignition switch is turned to the RUN position, the ABS control module will do a preliminary electrical check, and at approximately 20 km/h (12 mph), the pump motor is turned on for approximately one-half second. Any malfunction of the ABS system will cause the ABS to shut off; normal power assisted braking, however, remains.
Inspection and Verification — Scan Tool Communications Check
  1. Verify the customer concern by carrying out the Drive Cycle Test.
  1. Visually inspect for obvious signs of mechanical and electrical damage.


Visual Inspection Chart Mechanical Electrical
  • Parking brake cable
  • Tire pressure
  • Tire size or mismatched tires
  • Blown fuse
  • Central junction box (CJB):
    • fuse 23 (10A)
  • Battery junction box
    • fuse 102 (50A)
  • Connectors or connections
  • Ground integrity
  • Harness routing
  • Wire chafing
  • Circuitry open/shorted

-----------------------------------------------------------------------
Anti-Lock Control The four-wheel anti-lock brake system (4WABS) consists of the following components:
  • Anti-lock brake control module (2C265)
  • Front anti-lock brake sensor (2C204)
  • Front anti-lock brake sensor indicator (2C182)
  • Hydraulic control unit (2C219)
  • Rear anti-lock brake sensor (2C190)
  • Rear anti-lock brake sensor indicator (2C189)
  • Yellow ABS warning indicator

May 07, 2009 | 2000 Ford Expedition

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

46 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...