Question about Jaguar S-Type

2 Answers

Does a rear electronics control module require reprogramming in a 03 jaguar s type

03 jaguar s type. Stopped running during a drive. Error codes read communication failure rear control module. I am thinking about running to a yard that has these and pick up a different one. The trunk has taken on water over the years. I have unhooked and cleaned all terminals and checked over fuses. I am wondering about the programming or not of modules in the trunk. Please advise and thank you very much in advance, I love my car and am trying to save it. JR

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Jaguar Master
  • 4,514 Answers

U may need a replace but 1st test the one u have-jag tech is mor complex then othr cars--unplug the computer then replug a few times and see if system clears or reboots-pins in plugs often become corroded etc----the best diagnostic is a data stream that shows values of the vehicles system-done w factory gear at private shops--a code reader is something to sell parts

Posted on Mar 20, 2014

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Jaguar Master
  • 75,817 Answers

What does it control?

Posted on Mar 19, 2014

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 8 Answers

SOURCE: My service air bag light

First you got to check the conections to the module otherwise contact :http://www.myairbags.com/ or http://www.airbagsystems.com/index.html

Posted on Dec 03, 2008

emissionwiz
  • 75817 Answers

SOURCE: ABS light permanantly ON. recommend replace ABS module $$$$$$$$$$

I would go with the ABS module, if the shop is wrong make them fix what the real problem is for free, is this a Jag dealer?

Posted on Dec 11, 2008

raygin
  • 322 Answers

SOURCE: 2003 Jaguar S-Type, programming a key fob

The switchblade key would need to be compatable with your ignition switch barrel. Only normally available from jag dealers who check the Jag owners register before supplying you a replacement.
The older type seperate fobs could be programmed by switching the ignition on and off 8 times (allowing all functions to settle) and on the 9th switch on - press a button on each fob and then switch off. to test use a good fob to lock the car then try the reprogammed fob to unlock/lock. Sometimes this works first time - sometimes needs a couple of tries.

Posted on Apr 03, 2009

csmock132
  • 4669 Answers

SOURCE: Mustang, 1992 2.3L dual point OBD 1 error codes problem

Have you checked for spark on all 8 plugs? Unplug the exhaust side coil pack and run the engine. Does it run on all 4 cylinders?

Posted on May 27, 2009

  • 18 Answers

SOURCE: DISABLING SERVICE RIDE CONTROL via REPROGRAMMED BCM

bottom of sterring colum under under trim panel

Posted on Jul 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

2003 s type jaguar V6 over heated, replaced radiator now won't start. No water in the oil. Reads code P1000


The P1000 is a readiness code stored in the ECM telling you the drive cycle has not been completed. There is no repair needed for this code and it cannot be cleared. It is also not the cause of any fault warnings to come on.
When that warning comes on the ABS control module has detected a fault and stores a fault code. This code can only be read with a Jag factory tool. On your vehicle the control module itself has high failures which require replacement as well as the speed sensor and sensor harness. Of course no parts should be replaced until the faults are red. As far as the cost it will vary but if it is a faulty control module the part is expensive. There are rebuilt modules available. If th e fault code is a C1095 it is usually the module.

Your standard brakes will still function normally but you will need to be careful if driving in poor weather conditions as the brakes can lock up and the vehicle can skid.

Mar 26, 2016 | Jaguar Cars & Trucks

1 Answer

03 sts Cadillac blower keeps running after car off dash quit working twice while driving but came right back on


Would you like to try again on the model an year ? no sts in 03 ? CTS ?

If programmed these cars have a function that keeps the blower running after key off !

Feature

Availability
Afterblow
Available if reprogrammed by the technician
Afterblow Afterblow is a feature that dries the evaporator core by operating the blower motor after the engine is turned OFF. This reduces the amount of microbial growth that can create undesirable odors. The vehicle does not come equipped with the afterblow feature turned ON. If the afterblow feature is required due to an odor concern, it must be turned ON by reprogramming the HVAC control module, refer to Service Programming System (SPS) in Vehicle Control Systems.

Jul 01, 2015 | Cadillac Cars & Trucks

1 Answer

How do I fix codep1380 & p1383 to pass emission also boot open


There is a factory service bulletin for the P1383 code on Jaguar model S type. The factory recommends reprogramming the Powertrain Control Module (PCM) to repair the problem.

Oct 28, 2014 | 2000 Jaguar S-Type

2 Answers

What is code 1388 on a jaguar 2001 and how to fixit


this indicates a problem with the variable camshaft timing and possibly requires reprogramming PCM module
assume the engine warning light is on? does the engine run normal?

Jun 25, 2014 | 2001 Jaguar S-Type

1 Answer

2001 jaguar wont start after codes read


sounds like the code reader/dignostic equipment that has been used may have erased some or all of powertrain control module data.this did happen to me when the ids i was using became disconnected before it had finished clearing codes. had to recover the module by reprogramming as a new module only a jag dealer wil be able to do this has the complete car config.file has to reinstalled.

Aug 03, 2013 | 2001 Jaguar S-Type

1 Answer

Jaguar x type 2.5 v6 will not idle.




Hello


The Engine and Automatic Transmission (not applicable to manual transmissions) in this vehicles drive train are fully electronically controlled by a computer called the PCM and TCM (Power Train Control Module, Transmission Control Module). When a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM. Also always check fuel pressure for correct spec for your make and engine type.


Sep 20, 2012 | 2002 Jaguar X-Type

1 Answer

Jaguar s type wont stay running and has no ccodes flashing


Hello
The engine and automatic transmission in this vehicles drive train are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this or other drive-ability related problems occurs the computer stores a record of the problem (there are of course some exceptions to this, like the fuel pump, engine coolant temperature sensor and MAF sensor for instance) in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s) DO NOT REPLACE ANY PARTS UNTIL A TRAINED TECHNICAIN HAS DIAGNOSED THE PROBLEM TO AVOID SPENDING YOUR HARD EARNED MONEY ON PARTS THAT MAY NOT CORRECT THE PROBLEM

Aug 29, 2012 | 2000 Jaguar S-Type

1 Answer

Please tell me if a second hand electric control unit can be reprogrammed? simple answer required, yes or no!


yes. like with any type of control module it can be reprogrammed. the problem is finding some one to have the equipment other than the dealer who can do it. most dealers want deal with used or second hand parts due to liability reasons.

May 26, 2012 | 2008 Jaguar X Type

1 Answer

I have 2004 Jaguar S-type 3.0L V6-speed automatic. Trouble code B2477 control module. Multi Display / Climate control is to dash. How to repair B2477 control module. Please help me?


sorry but no code number this high in the jaguar codes so i would contact the code reader manufacturer and ask for a definination of what their codes read ,jaguar codes only read up to 1470 with a P in front ,if this problem is what i think it is then its a new panel unit ---OUCH--- expensive

Mar 14, 2011 | 2000 Jaguar S-Type

1 Answer

Rear box fault


HI. This is basically a transmission code. The rear box is an electronic gear module, that regulates the shift patterns of the vehicle, during transit. this is a very expensive repair, and it can only be repaired by a certified Jaguar service technician.

The necessary actions will be to have the codes ran at your local jaguar dealership. the codes will give you a better view on the actual fault, and its location, as well.

NOTE_ Depending on the code, there is also a rear fuse box that may be affecting the Transmission control modules functioning abilities. This can occur if the rear fuse box s experiencing a fault.

If you have the numbered codes handy, please post them here. If not, this will be the first action i would recommend to have administered.

Dec 30, 2009 | 2003 Jaguar S-Type

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

115 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jaguar Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22133 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

SPEEDY CAR WORK SHOP...

Level 2 Expert

489 Answers

Are you a Jaguar Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...