Question about Mercedes-Benz Mercedes Bentz Actros Semi Tractor

Open Question

MR show and engine crank but wont start

Engine will crank but it wont run..

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 2005 pacifica wont start lights are on but i cnt crank it


you might have a starter gone bad. When you try and crank does the engine spin over or is there just like one solid loud clicking noise? or is the engine spinning over when you try and crank but it just want start up and run?

Sep 28, 2015 | 2005 Chrysler Pacifica

3 Answers

Why won't it start?


Air and fuel filter,tune up,battery and connection ,

Aug 02, 2015 | 2005 Jeep Grand Cherokee

1 Answer

I have a 94 jeep cherokee that wont turn over or wont start?


No cranks is here
https://www.jeepdied.com/no-crank.html
TURNS OVER MEANS ZERO.
the starter just CRANK.
THE START MOTOR TURNS
IF lucky so does the crank shaft turn.
then the engine starts and runs, (this is not turns)
it's running
the EFI then sustains running , if ABS stays happy.
the engine can also stall.

Mar 13, 2015 | 1994 Jeep Cherokee

1 Answer

Can an overheated transmision make the car to fail to start. my isuzu bighorn cant start


no,
run at full speed, yes, can fail
the engine must crank to start, (a/t cars only) and if cant crank it cant start.
so if it cranks,(old post) then next is spark
then try test fuel if spark is good on unstated engine
its not a diesel is it?

Dec 22, 2014 | Isuzu Cars & Trucks

1 Answer

C200 Merc 2009 model, engine turns but car wont start, why


same for all engines. (no engine stated, so no exact answers)
is your gas or diesel (ill guess gas)?
gasoline and not LPG or other fuels. real gas ,nor flex fuels on E100
cranks but no starts.
blown fuses, check fuses first, ( always #1 with EFI)
bad gas.,
the first check is spark , gas dont burn lacking SPark (mr,otto cycle)
watch funny guy SCOTTY.
https://www.youtube.com/watch?v=064Ilsz8Fzg&NR=1&feature=fvwp

any engine can run on test fuel, if it has spark (Otto)
some engines will never start
  1. lost compreesion 1 or more cylinders
  2. melted CAT converter, blocking exhaust
  3. EgR stuck open, wide, if your unstated engine has one.
  4. fuel pressure zero or 10psi. dead. must be at spec.

Dec 18, 2014 | Cars & Trucks

1 Answer

My car cranks but wont start it has a low compression and we were told that the engine is gone but the diagnostic shows the problem as the crank sensor, we have gone to different mechanics but no one can...


usually if the ecu says crank code then its a faulty sensor, can be both crank and cam. as if the crank sensor goes it will not start. cam it will start but not run correctly. low compression would mean eather water in oil, water in cylinders, or blow back on compression. but with all or any of these the engine would still start but run badly.

Feb 14, 2018 | 2005 Mercedes-Benz C-Class

1 Answer

2000 durango wont start sometimes, turns but wont turn over, had look at two times?


You can hear the started going but engine want crank ???????
The starter is spinning the engine over , but won't start an run ! The starter is cranking the engine ,but the engine doesn't start an run . OK ,enough of that > When it won't start (run ) what's missing ? Ignition spark or no fuel pressure ? Video's on youtube showing how to test for these . Has to be one or the other .

Nov 28, 2017 | 2000 Dodge Durango

1 Answer

Mr oil drainage plug was lost and a temp plug was inserted. After recent oil change all oil leaked out now car wont crank. Checked oil nothing in motor. If i fix the plug and put oil back in car will it...


you will be very lucky if it will start by the sounds of things the engine is now seized and may never run again, if you can move the engine around with your hand or turn it in some way buy yourself, you might be lucky, i think you are looking at a 20% chance that it will run, and 80% chance of a new engine needed....hope this helps

Jul 02, 2010 | 2004 Chrysler Sebring

1 Answer

Code p0336 starts hard tach wont work obd11 07 cobalt


P0336 means Crankshaft Position Sensor A Circuit Range/Performance. Try replacing the crank sensor next.

http://www.check-engine-light.com

Sep 05, 2009 | Chevrolet Cobalt Cars & Trucks

Not finding what you are looking for?
Mercedes-Benz Mercedes Bentz Actros Semi Tractor Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

80608 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...