Question about 2006 Mercedes-Benz ClLK-Class

Open Question

Bluetooth mb a2048200535

Does not recognise iphone 4

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can’t download my iPhone 8 phone book into my 2012 Grand Cherokee Uconnect.


Turn iPhone Bluetooth On:First you want to make sure that Bluetooth is functioning on your iPhone. Click on the Settings icon from the iPhone desktop. From the settings screen click General to show the iPhone General Settings as displayed in the below image. Notice you can see if Bluetooth is on or off from this screen. General Settings screen you can click on Bluetooth to configure the Bluetooth settings. On the Bluetooth screen shown below click to the left of Off to turn Bluetooth On.
  1. Begin Uconnect Setup:Now that Bluetooth is operational on the iPhone you can start the Uconnect process. Click the Uconnect button on the rear view mirror to begin. The voice from the Uconnect system will ask you to verbally select one of the options from the menu. Once Uconnect asks for your input say "Setup" to begin the process of syncing the iPhone.
  2. Start Phone Pairing:Once you say setup in the above step the Uconnect system will list numerous options available from the setup menu. One of these options is "Phone Pairing" so when the Uconnect system asks for the choices from the setup menu say "Phone Pairing".
  3. Pair a Phone:In the Phone Pairing menu you can modify current entries or begin pairing a new phone. After Uconnect lists all of the choices you should say "Pair a Phone" to begin the process of pairing the iPhone.
  4. Uconnect Pin Code:The first step in pairing a phone is setting the Bluetooth Pin Code that authorizes that phone to pair with the Uconnect system. When asked for the Pin Code say any four digit combination such as "1 - 2 - 3 - 4". Uconnect will repeat back the Pin Code so you can verify it has recorded properly.
  5. Connect iPhone To Uconnect:After you have set the Pin Code for the Uconnect system you need to view the iPhone's Bluetooth Settings screen which you can get to following the steps in Step 1 above. Before the Uconnect system shows up in Bluetooth the Bluetooth Settings screen will look similar to the below where you may have other Bluetooth devices showing or not.After a couple seconds the Uconnect system will display as "Hands Free" as shown in the below image. Notice it states that it is not yet paired,,,,,
  6. Click on the Hands Free device showing in the Bluetooth devices list above. This will open a new screen as shown in the below image that prompts you for the Pin Code you specified in Step 5.

    Enter the Pin Code and then click the Connect button in the top right corner of the above window. This will pair the iPhone with Uconnect and take you back to the Bluetooth devices screen where the Uconnect Hands Free device will now show Connected as shown in the below image.

    After the device is connected you will be prompted by the Uconnect voice again so proceed to the below steps.
  7. Phone Name & Priority: After connecting the iPhone you will then name the phone and set a priority between one and seven. Name the phone anything you would like and if this is your primary phone set the priority to one so this phone always connects at a higher priority than any other phone.
  8. Verify & Test:Now have a friend dial your cell phone while you are in your car to see if the music volume lowers and the Uconnect voice tells you there is an incoming call from a certain number. To make calls you can press the Uconnect button and follow the voice prompts.
  9. The Uconnect system is a great way to safely use your cell phone in the car.

Jan 13, 2018 | Cars & Trucks

1 Answer

Vibe DG-478


Why didn't you read the instructions?

Pairing Bluetooth Devices

Posters often ask "How do I pair my Bluetooth ???" Insert whatever device you have at the question marks.

Generally, you need to read the instructions for the camera, headset, speakers or whatever the Bluetooth device is.

Roughly speaking though.

Settings - Bluetooth - Search, on the Android, iPhone, Windows phone whatever.

With camera, speaker, headphones or whatever the Bluetooth device is, you have to press a button on that device to send out the signal. On my Bowers and Wilkins T6 Speakers, there is a button on the top with the Bluetooth symbol on it. This is the part people usually don't do and ask for advice, thinking it will do this automatically.

When the Android device recognises it, click Pair, and if it asks for a code, the Default is '0000', (four zeros, no quotes).

Posted by Andrew... on Nov 19, 2016

Dec 10, 2016 | Cars & Trucks

1 Answer

Bluetooth reset


you may have to down load a driver so that the blue tooth recognises you new phone.. Talk to a phone /radio installer shop as they will be able to tell you what you have to do to get it working

Dec 05, 2013 | Toyota Cars & Trucks

1 Answer

When I have tried to pair my iphone 4 with my Volkswagen EOS 2007 I have turned bluetooth on phone and screen says searching (hour glass is turning) and also "now discoverable". It doesn't go furt


Hi. Does this happen with other phones too? Is it the first attempt at connecting to an Iphone 4? It sounds like the kit you have is not compatable to the phone. Kind reagrds, Neil

Apr 20, 2013 | 2007 Volkswagen EOS Convertible

1 Answer

Hi, i have a 2008 hst & iphone 4, the bluetooth was working great, it has stopped working, it connects but when i make or recieve calls it dosent connect to bluetooth


Hi James, I am not an expert on iPhones or Bluetooth, but suggest you go into the main set up menus on both devices and then disconnect both and then search and re match and accept them. It should work correctly then. Regards John

Dec 13, 2011 | 2008 Land Rover Range Rover Sport

1 Answer

Blue tooth phone conversations are not heard well from my truck. Poor quality speaker? Poor location? I don't make calls from my truck cuz they can't hear me well. What's up with this?


there are alot of variables for bluetooth. Type of phone, phone service and provider etc... what type of phone are you using here is just one of the latest post from gm.

#PIC5504: Intermittent Bluetooth Issues With Apple IPhone 4 - (Jul 13, 2011)
999999995.gif Subject: Intermittent Bluetooth Issues With Apple iPhone 4 Models: 2008-2011 All GM Passenger Car and Light Duty Trucks with RPO (UPF or UWE)

The following diagnosis might be helpful if the vehicle exhibits the symptom(s) described in this PI.
Condition/Concern:A customer may report of intermittent Bluetooth issues with their Apple iPhone 4.
Recommendation/Instructions:An issue with intermittent Bluetooth disconnects between the iPhone 4 and some GM vehicles has been identified. You may experience no audio in the vehicle for incoming and outgoing calls. When this occurs the Bluetooth system will say "Unable to place call on your Bluetooth phone". GM and Apple engineering groups are currently working on a resolution. The PI and GM Bluetooth website will be updated as soon as more information becomes available.
Please follow this diagnostic or repair process thoroughly and complete each step. If the condition exhibited is resolved without completing every step, the remaining steps do not need to be performed.

Jul 29, 2011 | 2009 GMC Sierra 2500HD

1 Answer

I cannot pair my verizon IPhone 4 with my 2008 Acura MDX bluetooth. The car cannot find my phone...


You need to make your phone "discoverable" to your bluetooth. Go to settings menu on phone , then wireless and networks. Click on bluetooth settings and click " discoverable mode". The car will never find your phone if your phone is not discoverable. Hope it helps.

Jun 20, 2011 | 2008 Acura Mdx

1 Answer

Bluetooth keeps aking for a pairing code. each 4 digit one I tried fails..says:cannot pair with ford audio..using n96 and iphone 4 both fail to pair


Did you try just pressing enter (no code)? If not, try "0000" I found something here: http://fordfcsd.wunderman.be/UK/Audio%20-%20Multimedia%20-%20Navigation/Bluetooth%20%26%20Voice%20control/bluetooth%20%26%20voice%20control%20%28cg3504en%29%2001-2006.pdf which indicates "0000" is the code, but enter should do it

Feb 04, 2011 | 2008 Ford Focus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

yadayada
yadayada

Level 3 Expert

78936 Answers

Joseph Prosser

Level 3 Expert

772 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...