Question about 1997 Pontiac Sunfire
Transmission will not shift (automatic) we were told that the 3/2 cylinoid needs replaced but I have a 2001 Sunfire with bad body but good motor and transmission. My question is...can I out the 2001 motor/transmission into the 1997 body??
If engine sizes are correct match for each vehicle engine swap wont be a problem u can possibly even drop the unibody of cars and swap depending on engine sizes match just unplug everything 8 bolt lift body pull unibody out get new rubber underneith for body support everything is manageble
Posted on Mar 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
give these websites a try www.alldatadiy.com and www.autozone.com and drive belt diagram www.webcrawler.com wish you the best of luck Michigan Man.if all fails stop by your local library and get your hands on a Haynes auto repair manual for your car.
Posted on Nov 12, 2009
SOURCE: How do you replace the
You need to replace more than the fluid, you need to change the filter. What happens is the filter can plug, and drop fluid pressure, then the clutches slip and burn.
You may want to consider having a lube shop, equiped with the T-Tech flush machine to do this job. If you drop the pan, you cannot drain the torque converter, cooling lines or cooling radiator. The t-tech machine puts in new fluid until clean fluid comes out...
Posted on Nov 21, 2010
The OBD II code for P0400 is Exhaust Gas Recirculation Flow Malfunction.
I'm sure the only thing you have left is you may have to replace the EGR valve or check for any leak from the vaccum lines going to to EGR valve.
Posted on Jun 01, 2009
Hello oldiro: My name is Roger and I can help. From under the vehicle look up between the transmission and the side of the block. Mid motor above the pan rail there is a bolted in sensor. This should be the crank sensor.It will have two wires plugged in to it. Please rate this answer as this lets us know you received the information you asked for. Should you need further help please just ask. Thank You for using FixYa. Roger
Posted on May 06, 2009
Tips for a great answer:
Jul 07, 2016 | Pontiac Cars & Trucks
Sep 06, 2015 | 2001 Pontiac Sunfire
May 26, 2015 | 1998 Pontiac Sunfire
Mar 08, 2015 | 2001 Pontiac Sunfire
Oct 18, 2012 | 2001 Pontiac Sunfire
Jul 14, 2012 | 2001 Pontiac Sunfire
May 26, 2009 | 2001 Pontiac Sunfire
Mar 06, 2009 | 2002 Pontiac Sunfire
215 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: