Question about 2001 Ford F150 Styleside SuperCrew
The remote key and the ignition switch have to be in sync with each other disconnecting the BCU has probably put the ign switch into another setting will have to be re-syncronised by a dealer
Posted on Mar 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
hi the transponder is the chip in the key my car is the same its the red bit on the key.... and there is a reciver around the ignition barrel where the key go's to start the car its a black circle with 3 or 4 wire's runing to it you can't by pass this but i have been told that some are made with an external P.A.T.S system (Immobiliser system ) but same are built in tio the e.c.u if its external it might be poss to bypass im also so sure you can buy a key coder off the net try googleing it i hope this is a help to you ......
Posted on Feb 13, 2009
insert one key and turn on quickly insert second key and turn on then off and same for the third new key if the third programmed correctly the theft light should be on steady not blinking
Posted on May 23, 2009
SOURCE: remote key fob won'tprogram
1-insert and remove key from ignition two times
2-close and open driver door two times
3-insert and remove key once from ign.
4-close and open drvr door twice
5-insert key into ign.,then close driver door
6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.
7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.
8-press lock/unlock together and hold for a second
9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.
You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works
Posted on Aug 13, 2009
Tips for a great answer:
May 03, 2017 | Cars & Trucks
Feb 18, 2017 | Toyota Cars & Trucks
Jan 16, 2017 | Cars & Trucks
Jan 06, 2017 | 1999 Lincoln Town Car
Jun 03, 2016 | Nissan Altima Cars & Trucks
Mar 02, 2015 | 2010 Toyota Matrix
Jan 20, 2013 | Dodge Ram Pickup 1500 Cars & Trucks
May 30, 2017 | 2001 Honda Accord
Feb 12, 2010 | 2000 Nissan Pathfinder
49 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: