Question about 2010 Suzuki Swift

1 Answer

Suzuki swift electrical fault

When you press the key fob twice to unlock all the doors, the rear (boot) door opens. If you go round and close it, as soon as you get in the car and shut the driver's door the rear boot door opens again. If you only press the key fob just once to only unlock the driver's door then everything is fine. Is this a short somewhere?

Posted by on

  • Cathy
    Cathy Mar 19, 2014

    I should mention that we've had no problems up until now and the problems happens with both the main key fob and the spare. :)

×

Ad

1 Answer

I would start by reading your owners manual
to see if you got the remote features down correctly

If you drive from age 18 to 88 ,some 70 years, you won't
encounter more than one short in all your vehicles or house
hold products combined

Posted on Mar 19, 2014

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: suzuki swift is full of problems

the law covering work under warranty does not invalidate work on your car of carried out by a reputabkle engineer contact Suzuki directly as this is not enforcable under law and just point that out mention the rule of tort under contract law it requires both sides to act reasonably and not to act to the detriment of both parties to the ocntract

Posted on Dec 31, 2008

  • 259 Answers

SOURCE: electric windows not working

i would look for a blown fuse

Posted on Mar 27, 2009

MNfisherman
  • 11896 Answers

SOURCE: suzuki swift broken electronic door lock

No there is not many problems with this car at all. In fact it has very good ratings. This car may just have a bad electrical connection to the lock mechanism behind the door panel. You can push down drivers lock and then hit all door lock button and it should work no problem. You then can use remote to unlock all doors.

Posted on Jul 09, 2009

  • 102 Answers

SOURCE: suzuki grand vitara 2002, rear door lock sticks

The inner trim panel is simply (?) held on with plastic push clips and a couple of screws (I think). The screws are on the lower edge from memory but have a good look around the whole trim before continuing. If all screws are removed, then all you have to do is pull the trim off. I usually get a screwdriver wrapped in a bit of cloth to help pop the first one, then you can get your fingers underneath for the rest. Start from the centre of one of the lower corners/curves.

Posted on Jan 11, 2010

  • 12 Answers

SOURCE: Hello - I think I

If you go to a place that sells all kinds of battery they will usually change it for you. But a smaal flat head screw driver also works

Posted on Aug 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1.3l. Passenger door is jammed shut. How can I open it?


got ice?
it's 80f here. no ice
so???
fob dead
outer key dead
but what about inside?
if all are dead, then yes pull the skins (cards)

Jan 07, 2016 | 2006 Suzuki Swift

1 Answer

An 08 prius keyless entry doesn't work, changed the batteries, pushed the disable button and reset it, still no go. Any ideas?


1. Start with the key out of the ignition, drivers door is open all others closed and
drivers door is unlocked.
2. Perform these steps within 5 seconds.
A. Insert the key into the ignition and Pull key out twice (Do NOT Turn)


3. Perform these steps within 40 seconds.
A. Close then open the drivers door twice.
B. Insert the key into the ignition(Do NOT Turn) Pull key out.
4. Perform these steps within 40 seconds.
A. Close then open the drivers door twice.
B. Insert the key into ignition and leave it in ignition.
C. Close the drivers door.
D. Turn the ignition to ON (Do NOT Start) then back to OFF.
E. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically
indicating successful entry into programming mode.
Return to step 1 if the locks do not cycle at this point.
6. Perform these steps within 40 seconds.
A. Press the lock and unlock buttons on the remtoe simutaneously for 1.5 seconds.
B. Immediately after letting go of the lock and unlock buttons,
Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door
locks should lock and then unlock once indicating successful programming. If
the door locks cycle twice, repeat steps A and B in step 6 as the remote was
not accepted.
C. Repeat steps A and B in step 6 for each new remote.
7. Open drivers door.

Jul 17, 2014 | 2008 Toyota Prius

1 Answer

Replaced batery in key fob and now there is no connection between fob and security system...I can lock and unlock doors with the key and I can start car ...fob doesn't work; does not lock or unlock...


reprogram the remote transmitter. first leave driver door open all other doors closed,key removed from the ignition switch. insert key into the ignition switch,then remove it.press lock and unlock on the vechicle door lock control switch at 1 second intervals 5 times. close and repoen drivers door.press lock and unlock on the vechicle lock control switch at 1 second intervals 5 times. insert key into ignition switch. switch ignition on and off twice to program a remote transmitter code whilst erasing the original codes or three timre to check how many remote transmitters are currently registered.remove key from the ignition switch.system should now lock and unlock.twice to indicate programming mode or one to four times,slowly to indicate number of remote transmitters registered.for the solara press and hold lock and unlock remote buttons together, press lock remote button for a second period of 1 second. system should now lock and unlock vechicle.once to confirm, twice to indicate registration has failed.if required repeat button procedure to program remaining remote transmitters.note to exit programming mode close drivers door or insert ignition key.maximum of 4 remote transmitters can be programmed.if akk failed let dealership reprogram remote transmitters.

May 18, 2011 | 1999 Toyota Camry Solara

1 Answer

Central locking


turn key twice when opening, ie turn right. once drivers door will unlock, turn twice passengers doors will unlock, and locking is turn anti clock wise once will lock all doors, turn twice will set door dead locks.dead locks will stop openand lock internal button working and handle from opening door. the same actions can be applied to the remote one press drivers door, two press passenger doors, press and hold unlock button for 5 seconds and rear window will open.

Apr 23, 2010 | 2003 Land Rover Freelander

1 Answer

Remote key fob won'tprogram


1-insert and remove key from ignition two times

2-close and open driver door two times

3-insert and remove key once from ign.

4-close and open drvr door twice

5-insert key into ign.,then close driver door

6-turn key to on (not start) then off, twice this is rewrite mode,have all remotes to reprogram it will clear any lost remotes.

7-remove key from ignition,the door locks should cycle twice.if not start over.it may take a few tries.

8-press lock/unlock together and hold for a second

9-release,and press lock on remote,the door locks will cycle confirming program.continue to do other remotes you have,steps 8 and 9.if only one in possession,you are done. To end mode open door or insert key into ignition.

You'll need to follow the steps with no more than a 1-2 second delay between each step.. hope it works

Aug 13, 2009 | 1999 Ford Escort

1 Answer

Jaguar X Type estate rear hatch glass pops open on start up


Hi the fault is usually the  button for opening the rear glass, this can be changed easily if it is not sezed to the wiper spindle  D 

Jan 18, 2009 | 2005 Jaguar X-Type

1 Answer

Rear door on 97 bravada can't be unlocked to open


No easy way to do this - you need to remove the inside door panel from inside the truck and manually release the lock. You didn't say where the wiring was burnt, but when the door is open test for power at the lock solenoid - if not there when unlock is pressed, inspect the wiring (particularly at the two rubber wire casings connecting the door to the frame). If it is there, the lock solenoid is stuck and may have to be replaced.

Oct 02, 2017 | 1997 Oldsmobile Bravada

1 Answer

Programming a 1995 toyota avalon key fob


To program a remote... note that you must not delay more than 10 seconds between any of the operations.

Driver's door open, all other doors closed, key removed from the ignition switch.

Insert key into ignitions switch, then remove it.

Press LOCK then UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times.

close and re-open drivers door.

Press LOCK and UNLOCK on the vehicle door lock control switch at 1 second intervals 5 times

Insert Key into ignition switch.

Switch ignition ON and OFF once to program a remote transmitter code while retaining the original codes or twice to program a remote transmitter code while erasing the original codes. three times to check how many remote transmitters are currently registered, or 5 times to erase all registered codes.

Remove Key from ignition switch.

System should now lock and unlock vehicle. Once, twice or five times depending which mode has been selected. It will lock and unlock one to four times slowly, to indicate the number of remote transmitters registered if you chose option 3.

Press and hold remote transmitter LOCK and UNLOCK buttons at the same time.

Press LOCK remote button for 1 second: System should now lock and unlock vehicle once to confirm, twice to indicate registration has failed.

NOTE: to exit programming mode, close drivers door or insert key in the ignition.

NOTE: a maximum of 4 remote transmitters can be programmed

Oct 13, 2008 | 1995 Toyota Avalon

1 Answer

Mini cooper key fob settings


Try pushing the unlock button twice.

Mechanic @ Large Mobile Automotive Service Tucson,AZ
www.mechanic-at-large.com

Jun 19, 2008 | 2003 Mini Cooper

Not finding what you are looking for?
2010 Suzuki Swift Logo

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Boyet Soriano
Boyet Soriano

Level 2 Expert

293 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...