Question about Saab 9 5
I am having a problem trying to remove the headlight assembly to change the turn indicator bulb.
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
that might help
1st remove the plastic cap that covers the back of the bulb
then just twist the rest off to the right..something like that..im gonna work on it tommorow
Posted on Sep 04, 2008
When you raise the hood, look for a Phillips screw that holds the parking lamp in. if it is there remove screw and pull parking lamp toward front of vehicle. If headlamp and side lamp are 1 piece, there should be 2 number 10 mm headed bolts that are vertical, that hold the assembly in. The side lamp will have a stud that holds the light to the fender. You may have to pry it loose. Reverse procedure to install.
Posted on Dec 23, 2008
SOURCE: Removing Headlight assembly
There is a small hex headed fastener behind the headlight, oriented vertically. Loosen this and remove it, it is long and passes through the body of the light housing to threads below. You then pull the headlight housing forward, its still held in place by several friction fasteners so it may take a little force but it will "pop" off and then when you're through you'll have to "pop" in back in.
Posted on Jan 13, 2009
Check the fuse box under the hood on drivers side, it will be number 17 and a 10 amp. this vehicle has automatic headlight adustment when you crank the car. If the fuse is blown the lights will point down to keep from blinding oncoming traffic.
Posted on Jan 22, 2009
Look at the top of the headlight assembly. There is a plastic panel on top of the assembly that is held in place by two plastic pins. Remove those pins by lifting the center of the pin and then pull out the pin. Remove the panel. Then you will find two small plastic levers that will lift about 1/2 inch. They do not come out but they will release two studs that secure the assembly. After the assembly is released, slide it forward to access the bulbs you need to replace. Installation is the reverse of these procedures.
Posted on Mar 08, 2009
Tips for a great answer:
Jul 01, 2016 | Saab Cars & Trucks
Jan 06, 2013 | 2006 Saab 9-7X
Jul 15, 2010 | 1999 Saab 9-5
Jul 10, 2010 | 2004 Saab 9-3
Sep 02, 2009 | 2004 Saab 9-3
Apr 23, 2009 | 2007 Saab 9-3 Aero Convertible
Apr 23, 2009 | 2004 Saab 9-3
Jan 22, 2009 | 2004 Saab 9-3
Oct 16, 2008 | 2004 Saab 9-3
705 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: