Question about 2006 Nissan Navara 2.5

Open Question

Cant find towbar wiring plug or loom

Wiring loom or plug

Posted by Anonymous on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can I just wire my Towbar electrics in to my wiring loom or do I need somthink else on my 04vectra


Yes you can tap into the wiring loom for trailer lights, that is how rental agencies do it on their trailers.

Apr 01, 2016 | Cars & Trucks

1 Answer

I have a 2012 Hyundai ix35& have fitted a towbar wiring loom.


take it to an accredited auto electrician to have the reverse sensor disconnected when the trailer is connected as the sensors are seeing the trailer when reversing and that is why they are beeping

Feb 17, 2016 | Hyundai Cars & Trucks

1 Answer

Tow bar wiring


Hi there:
I suggest to check ths diagram...

6_18_2012_5_21_41_pm.jpg


and visit this LINK for additional details.

Hope this helps; also keep in mind that your feedback is important and I`ll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa, have a nice day.

Jun 18, 2012 | Cars & Trucks

1 Answer

Have plug in towbar electrics for 52plate passet saloon need diagram to wire plug at towball


Hi There.
here are the 7 cable locations and pin numbers.
Pin 1 Yellow L/H Direction Indicator
Pin 2 Blue Rear Fog Lamps
Pin 3 White Earth Return
Pin 4 Green R/H Direction Indicator
Pin 5 Brown R/H Tail & No, Plate Light
Pin 6 Red Stop Lamps
Pin 7 Black L/H Tail & No, Plate Lights

I found the easiest way to locate the correct wires in the loom is to turn on the lights required and use a circuit tester and splice into the main loom where you have enough wire to play with. Try not to cut the loom as it only causes more problems with bad connections and joins.
Good Luck

Jun 02, 2010 | 2002 Volkswagen Passat

2 Answers

Jaguar 2005 X-type estate towbar electric connector.


The Jaguar doesn't have a towbar connector as such, there is a dedicated towbar wiring kit available, this plugs into the lamp connectors and has a towing module incorporated into the kit.It also has a small connector that plugs in to a spare connector in the loom for cutting off the parking sensors when you plug in your trailer. If you are in the UK then check on the NTTA website for a towvbar supplier that can either send one out or is local to you.

Oct 25, 2009 | 2003 Jaguar X-Type

1 Answer

Wiring towbar electrics for nissan navara d40


The best, and in fact the only recommended solution is to use a plug-in dedicated wiring kit for this car, it plugs into a grey connector on the chassis on the rear of the left hand side. this is the connector that the cars rear light loom is plugged into and the towbar loom piggybacks onto this using the same watertight sealed connectors. There is a trailer indicator warning light already built into the dash display so no need for any other monitoring of the trailer functions. This wiring kit should cost you around £40-£50 and will only take around 10mins to fit. The other alternative is to solder the towbar wires to the cars loom, but this is time consuming and may invalidate the vehicles warranty.

Sep 15, 2009 | Nissan Pathfinder Cars & Trucks

1 Answer

Cant find the towbar electrics plugs for x-type


I assume that the towbar didn't come with a proper wiring kit as, unfortunately there is not a specific connector for the towbar wiring on the x-type, the proper Vehicle Specific Kit plugs into the rear light. There is a power connector with three pins on the left and a grey reverse sensor cut out connector also on the left. but you will either need to use a Vehicle Specific Wiring kit (about £175) or use a bypass relay system.

Aug 30, 2009 | 2006 Jaguar X-Type

2 Answers

Tow bar trailer socket wiring connection point to car wiring?


The connectors for towing wire harnesses on foresters are generally on the passenger side, below the rear taillight inside the cargo space. some require pulling up the foam block that is between the spare tire compartment and the taillight. Check where you replace the tailights from inside the car, if there isn't a matching connector hanging out there, check around the spare tire compartment, see if you can remove the carpeted foam block next to the compartment and find the plug under there.

Jun 03, 2009 | 2006 Subaru Forester

1 Answer

Wiring in a tow bar


First I'm sure that a Festiva should probably only be towing body weight, But if you want to hook up a wiring loom for towing I would suggest buying a 4 lug loom from a auto store, then I would get a chilton or haynes manual to get the wiring diagram (or internet) then wire it up with **** connectors and electrical tape.

Apr 29, 2009 | Ford Festiva Cars & Trucks

2 Answers

Tow bar wiring


Search online, it should be plug and play. The side panel has a plug, pretty simple.

Aug 24, 2008 | 2000 Jeep Grand Cherokee

Not finding what you are looking for?
2006 Nissan Navara 2.5 Logo

Related Topics:

14 people viewed this question

Ask a Question

Usually answered in minutes!

Top Nissan Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Phil Lovisek
Phil Lovisek

Level 3 Expert

726 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Are you a Nissan Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...