Question about 2002 Toyota Tacoma
All bolts loose cannot remove
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: Light is out in the dashboard
Remove the screws at the top of the black fascia that is in front of the clear plastic cluster lens
Pull the fascia off
Remove the 4 screws from each corner of the instrument cluster
Pull the cluster out, unplug all of the wire connectors
Do not disassemble the cluster; no need.
The bulbs are accessible at the rear of the cluster; twist to remove the bulb holders
Reassembly is easy, the connectors only fit one way.
Hope this helps.
Thnaks for choosing FixYa
Posted on Nov 05, 2008
No. Removal of the intake manifold is not an attractive option.
...That will cost you more time and money in the long run.
You will need to replace the intake manifold gasket, and several others.
Posted on Jan 15, 2009
SOURCE: need to replace broken lug bolt
If you have room behind the broken lug you can usually drive it out with a good smack of a sledge hammer. To re-install, use a stack of washers between the nut and flange and draw the lug into position. (plenty of oil on threads to avoid galling)
Posted on Apr 19, 2009
Go to any parts store and they will help you.Also you can go to your local Wal Mart auto dept,they have a book you can use for free.
Posted on Jul 24, 2009
REMOVAL & INSTALLATION
On all engines except the 2UZ-FE, the starter is external, mounted in a conventional manner, alongside the engine block. One the 2UZ-FE, however, the starter is mounted in the 'V' of the engine, between the cylinder head banks. The entire intake manifold assembly must be removed to access the starter motor and solenoid. (Toyota calls the solenoid a "magnetic switch.")
Except 2UZ-FE Engine
Fig. Unfasten the starter mounting bolts . . .
Fig. . . . then pull the starter toward the front of the vehicle to remove it (other components removed for clarity)
Fig. Exploded view of a common starter mounting found on Toyota trucks
Fig. The starter motor on this 2UZ-FE engine is installed under the intake manifold between the cylinder heads, making it a lengthy procedure to perform
Hope this help (ermember rated this).
Posted on Mar 28, 2010
Tips for a great answer:
Mar 19, 2014 | 2001 Toyota Tacoma
Sep 25, 2012 | 1997 Toyota Tacoma
Jun 29, 2011 | 1995 Toyota Tacoma
Jan 11, 2011 | 2001 Toyota Tacoma
Aug 06, 2010 | 2007 Toyota Tacoma
Apr 22, 2010 | 1995 Toyota Tacoma
Jun 22, 2009 | 1999 Toyota Tacoma PreRunner
Jun 18, 2009 | 1999 Toyota Tacoma PreRunner
80 people viewed this question
Usually answered in minutes!