- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
I would go after the door lock first. Older fords have a switch on the door lock that disables the alarm. They tend to break and fall though. I have replaced them with a momentary on/ff switch.But the alarm would go off when opening the door. On some older ones(85,87)(no keypad) I could disconnect the security module and it did just fine.
1.doors will lock when you start engine,(autolock)
2.are you using service key in trunk lock? it wont go in all the way,(try another key)
3.have you tried turning key fully to the left then button release/turn key fully to right then button release,(valet lock)
Still have a problem?please feel free.....
car supplied with 3x keys and 2x remotes when new...
Ok get in car. close all doors. Put key in ignition cycle key four times on & off. DO NOT START. Within 10 seconds of the final cycle, press the drivers door lock switch to the lock position. If you here a single chime you have reprogrammed the power door locks. This can be done of throught the EVIC system if the van has the system. If problem does not go away lock motor is bad