Question about Cars & Trucks
Have you checked the main earth points dont know your model but usually if they all fail on one side then the earth is the fault. if the fuse fine and relays then the earth is the fault.
usually earths are near the head lights and under the battery on one of the frames there will be a cluster of them head lights side usaly one or 3 on the earthing point.
Posted on Mar 19, 2014
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Low beam headlights don't work
I have e-mailed you 2 .pdf files, one is the complete headlamp diagram, and the other is the relay locations. Please advise if you need further assistance.
Posted on Jan 02, 2009
SOURCE: brake lights/rear turn signals
I had the same problem with my 1999 Yukon. The electric board needed to be replaced. Rust starts to build up and shorts out or blows the bulb. The dealership charged $73.60 for the part and I installed it myself (Saved $30).
Posted on Jan 05, 2009
chapmnfarm: your head lights use a "2" fuse system.
one for the left and one for the right.
The fuse box you are looking for is under the hood on the passenger's side. It is a black box roughly 8 inches long and 4-5 inches wide. When you remove the cover, you will see fuses and relays. What you are looking for is the section in the box which has a cluster of 7 fuses. 3 in one row and 4 in the other. On the outer parameter are two relays. The fuses you are interested in are located in the row of 4 fuses, with the two closest to the "L" shaped part of the box. Both of those should be 15 amp fuses.
The fuse below those should be a 20 amp which is the lighting switch and the one below it is a 15 amp which is for the interior lights and the clock.
Check your harness grounds in the engine compartment near the area you have the problem. There are ground wires which come out of the harness on both sides of the core support. The wires are black in color and have "EYES" crimped onto the ends of the wires. Both of them will probably be located about 4-6 inches below the upper tie bar on each side of the radiator. Odds are that the eyes will be large enough to pass a 6mm bolt through.
I hope what I have given you will resolve your problem. Lem me know,,good luck>>>>>>>>>>>>>>>
Posted on Apr 19, 2009
The turn signal switch and 4 way flashers have the relays built inside. If fuses and flasher is good, then switch is bad.
Posted on Nov 18, 2009
Tips for a great answer:
Jan 16, 2015 | 1998 Toyota Sienna
Dec 26, 2014 | 2008 Ford Taurus
Mar 30, 2014 | 1997 Toyota Corolla
Jan 19, 2013 | Chevrolet Express Cars & Trucks
Jul 24, 2012 | 2007 Toyota Matrix XR
Dec 22, 2010 | 1998 Chevrolet Suburban
Aug 18, 2010 | 2005 Honda CR-V
Jun 02, 2009 | 2001 Toyota Tacoma
72 people viewed this question
Usually answered in minutes!